Hanover BGC08006 Manual
Text of the manual
Hanover Outdoor Furniture
IMPORTANT
If you have any problems with this product (missing or damaged parts, assembly issues, etc.),
PLEASE DO NOT RETURN TO THE RETAILER/STORE
from where you purchased the product.
Please call our Toll‐Free Customer Service Hotline at: 1‐800‐416‐3511
Between 9:00 AM and 5:00 PM Ea
IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPT
Step 1: Carefully unpack and identify all parts packed in the carton against the parts list. Remove all protective materials. If you are missing any parts or are unsure how to
proce
by using four 1/4"x4 mm bolts and washers as
shown in Fig.5. Guide the bolts through holes in base, into the pre-drilled holes in the seat.
Hand tighten only.
Step 5: Using the hex wrench and hex bolt driver provided, tighten all nuts and bolts. Do not over
tighten bolts. If nuts and bolts are too tight or too l
Step 1: Identify all parts packed in the carton against the parts list. Remove all protective materials. If any parts are missing or damaged, call our Customer Service Center at 1-800-416-3511. Do not attempt assembly
any parts are missing or damaged.
Step 2:
Step 3: Attach love seat arm by inserting two
mm bolts with washers through the
Step 4: After making any necessary adjustments to the
alignment of the table legs and the leg connector
bracket, use hex bolt driver to tighten all bolts.
Note: Each bolt must be tightened a few revolutions
at a time. In order to apply equal pressure to all bolt
joints, we recommend working in
