Chrysler uconnect Operation & User’s Manual

SECTION PAGE 1 IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 UCONNECT ACCESS OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4 UCONNECT 3.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 5 UCONNECT 5.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 6 UCONNECT 8.4A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 7 UCONNECT 8.4AN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 1 2 3 4 5 6 7

CONTENTS  Identifying Your Radio . . . . . . . . . . . . . . . . . . . . .4 1

Uconnect 3.0 Key Features • 3” Screen • Two hard-keys on either side of the display • SiriusXM™Optional Uconnect 5.0 Key Features • 5” Touch-Screen • Three hard-keys on either side of the display • Hands-free/Bluetooth • SiriusXM™Optional 4 Identifying Your Radio

the listed features provide the differences. • 8.4” Touch-Screen • Navigation-Ready, see your dealer for details • Hands-free/Bluetooth • Touchscreen Climate Controls • SiriusXM™ • Embedded Connectivity (US Market Only) Uconnect 8.4AN Key Features • 8.4” Touch-Screen • Navigation Standard • Hands-free/Bluetooth • Touchscreen Climate Controls • HD Radio • SiriusXM™ • SiriusXM™Traffic • Embedded Connectivity (US Market Only) 1 Identifying Your Radio 5

You have full responsibility and assume all risks related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. Ensure that all persons read this manual carefully before using the radio system. It contains instructions on how to use the system in a safe and effective manner. Please read and follow these safety precautions. Failure to do so may result in injury or property damage. • Glance at the screen only when necessary and safe to do so. If prolonged viewing of the screen is necessary, park in a safe location and set the parking brake. • Stop use immediately if a problem occurs. Failure to do so may cause injury or damage to the product. Return it to your authorized dealer to repair. • Make certain that the volume level of the system is set to a level that still allows you to hear outside traffic and emergency vehicles. Safe Usage of the Uconnect Access System • Read all instructions in this manual carefully before using your system to ensure proper usage! • Your system is a sophisticated electronic device. Do not let young children use your system. • Permanent hearing loss may occur if you play your music or the system at loud volumes. Exercise caution when setting the volume on your system. 8 Safety Guidelines

attention. If you’re engaged in driving or any activity that requires your full attention, we recommend that you not use your system. NOTE: Many features of this system are speed depen- dent. For your own safety, it is not possible to use some of the touch screen features while the vehicle is in motion. • Keep drinks, rain, and other sources of moisture away from your system. Besides damage to your system, moisture can cause electric shocks as with any elec- tronic device. Touch Screen • Do not touch the screen with any hard or sharp objects (pen, USB stick, jewelry, etc.) which could scratch the touch screen surface! • Do not spray any liquid or caustic chemicals directly on the screen! Use a clean and dry micro fiber lens cleaning cloth in order to clean the touch screen. • If necessary, use a lint-free cloth dampened with a cleaning solution, such as isopropyl alcohol, or an isopropyl alcohol and water solution ratio of 50:50. Be sure to follow the solvent manufacturer’s precautions and directions. Disc Drive • Do not insert any damaged, warped, scratched or dirty Discs into the Disc player. • Discs that have been modified with an adhesive label should not be used in the Disc player. • Do not insert more than one Disc at a time into the drive slot. 2 Safety Guidelines 9

with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm- ful interference in a residential installation. This equip- ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Increase the separation between the equipment and receiver. - Consult the dealer or an experienced radio technician for help. Safety Information Exposure to Radio Frequency Radiation The radiated output power of the this internal wireless radio is far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used in such a manner that the radio is 20 cm or further from the human body. 10 Safety Guidelines

found in radio frequency safety standards and recom- mendations, which reflect the consensus of the scientific community. The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emit- ted by wireless devices such as mobile phones. However, the use of wireless radios may be restricted in some situations or environments, such as aboard airplanes. If you are unsure of restrictions, you are encouraged to ask for authorization before turning on the wireless radio. 2 Safety Guidelines 11

CONTENTS  How to Register with Uconnect Access: . . . . . . .15  Uconnect Access In-Vehicle Assistance Features . . .16  Uconnect Access In-Vehicle Connectivity Services. .18  Uconnect Access Additional Information. . . . . . . .19 3

Uconnect 8.4AN) With Uconnect Access, owners have emergency and re- mote vehicle features available. These features include 9-1-1 Call, Roadside Assistance, Uconnect Care and Vehicle Care. With the Uconnect Access, your vehicle is also capable of remote vehicle features like Remote Start, Remote Door Lock/Unlock, and Remote Horn and Lights. Once registered, Uconnect Access customers can purchase packages and apps at any time. For additional information, contact Uconnect Customer Care at 855-792-4241, or visit Owner Connect (www.MoparOwnerConnect.com). 14 Uconnect Access Overview

1. With the vehicle parked and the radio powered on, select the “Apps” soft-key located near the bottom of the radio touch screen. 2. Select the “Uconnect Registration” App soft-key from the Apps list. 3. The Uconnect Registration App will open and pro- vide step-by-step instructions on how to enter your email address to begin the registration process. 4. You will receive a secured registration email from Uconnect Access containing a link for completing your Uconnect Access Registration on-line. For secu- rity reasons, this email link will be valid for 24 hours. 5. Follow the link to complete the final step of registra- tion and to begin using Uconnect Access For additional registration assistance while in the vehicle, push the ASSIST button to contact Uconnect Customer Care. 3 Uconnect Access Overview 15

With Uconnect Access, your vehicle has an on-board assistance feature located on the rear view mirror de- signed to enhance your driving experience if you should ever need assistance or support. ASSIST Call The rear view mirror contains an ASSIST push button which automatically connects the vehicle occupants to one of several predefined destinations for immediate support: 1. Roadside Assistance Call – If you get a flat tire, or need a tow, you’ll be connected to someone who can help anytime. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside Assistance. Assist Call button 16 Uconnect Access Overview

Uconnect Access System, Apps and Features. 3. Vehicle Customer Care – Total support for your Chrysler Group vehicle. 9–1–1 Call Places a direct call to local 9–1–1 emergency authority. 9–1–1 Call button 3 Uconnect Access Overview 17

Services Uconnect Access brings the power of the internet into your vehicle with exciting features, remote capabilities, theft alarm notification, and stolen vehicle assistance applications through on-board connectivity service. Once registered with Uconnect Access, you can customize the capabilities of your vehicle system using your Uconnect Access account from the vehicle, the web, or your Smart- phone. Please refer to your Uconnect Access account for infor- mation on available subscriptions, applications and pack- ages for your vehicle. For additional information, contact Uconnect Customer Care at 855-792-4241, or visit Owner Connect (www.MoparOwnerConnect.com). 18 Uconnect Access Overview

My Uconnect Account To use the Uconnect Features and Services, you must first register your vehicle with Uconnect Access. Please refer to the “Register with Uconnect Access” section of this User’s Manual to start registration. Once registered, you can personalize your vehicle Uconnect System as desired. How to Purchase or Cancel an App From your Uconnect Access Account, you can easily purchase or cancel Applications or subscriptions. Simply log-in to your Uconnect Access Account and visit your Uconnect Store. Correcting a Download Error - How to Reset the Uconnect Access System You can easily correct any App related issues by resetting the App. Simply log-in to your Uconnect Access Account and visit the Uconnect Store, click on My Apps, click on Settings, and then choose Reset/Reinstall. In minutes your App will be reinstalled and ready to go. Selling my Vehicle - How to Completely Remove My Uconnect Account To completely remove your Uconnect Account, simply log-in to your Uconnect Account and visit the Uconnect Store, click on My Apps, click on Settings, and then choose Remove Uconnect Account. In minutes your entire Uconnect Account and information will be removed from your vehicle. For further assistance call 855-792-4241, or go to the Mopar Owner Connect site at (www.MoparOwnerConnect.com). 3 Uconnect Access Overview 19

 Radio Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . .24  Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .27 4

1. RADIO Press the RADIO hard-key to enter the Radio Mode. The different tuner modes; AM, FM and SXM can be selected by touching the corresponding soft-keys in the Radio Mode. 2. INFO Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). 3. A-B-C Press the A-B-C hard-key to select the A, B or C preset list. 4. ENTER/BROWSE & TUNE/SCROLL Press the ENTER/BROWSE button to accept a high- lighted selection on the screen. Rotate the TUNE/ SCROLL rotary knob to scroll through a list or tune a radio station. 5. SEEK UP Press the Seek Up soft-key to tune the radio to the next listenable station or channel. 22 Uconnect 3.0

screen. 7. MENU Press the MENU button allows to scroll between the setting sub-menus. 8. PLAY/PAUSE/MUTE Press to Play, Pause or Mute the music. 9. AUDIO Press the AUDIO button to adjust the Bass, Mid Range, Treble, Balance or Fade. 10. SEEK DOWN Press the Seek Down soft-key to tune the radio to the previous listenable station or channel. 11. ON/VOLUME Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the ON/VOLUME control knob to the right increases the volume and to the left decreases it. 12. PRESETS 1–6 These buttons tune the radio to the stations that you commit to pushbutton memory AM (A, B, C), FM (A, B, C) and Satellite — 18 AM, 18 FM and 18 SAT stations. 13. MEDIA Pressing the MEDIA button will allow you to switch from AM/FM modes to Media mode (CD, USB/iPOD, AUX, Bluetooth). 4 Uconnect 3.0 23

• FM • AM • SXM Sirius XM™Satellite Radio (if equipped) Touch the RADIO button, to enter the Radio Mode. The different tuner modes; AM, FM, and SXM, can then, be selected by touching the corresponding soft-keys in the Radio mode. ON/OFF & Volume Control • Push the ON/OFF Volume control knob to turn on the radio. Push the ON/OFF Volume control knob a second time to turn off the radio. • When the audio system is turned on, the sound will be set at the same volume level as last played. Enter/Browse & Tune/Scroll Control • Turn the rotary TUNE/SCROLL control knob clock- wise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection. Seek Functions Seek Up • Touch and release the Seek Up button to tune the radio to the next listenable station or channel. • During a Seek Up function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began. 24 Uconnect 3.0

radio to the next listenable station or channel. • During a Seek Down function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began. Setting Presets The Presets are available for all Radio Modes, and are activated by touching any of the six Preset buttons. When you are receiving a station that you wish to commit into memory, press and hold the desired num- bered button for more that 2 seconds or until you hear a confirmation beep. The Radio stores up to 18 presets in each of the Radio modes. Press the A-B-C hard-key to select the A, B or C preset list. SiriusXM™Satellite Radio Mode SiriusXM™Satellite Radio uses direct satellite-to-receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is SiriusXM™Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, and programming for children, directly from its satellites and broadcasting studios. A one-year SiriusXM™Satellite Radio subscription is included. SiriusXM™and all related marks and logos are trade- marks of SiriusXM™Radio Inc. and its subsidiaries. SiriusXM™Satellite Radio requires a subscription, sold separately after trial subscription included with vehicle purchase. Prices and programming are provided by SiriusXM™and are subject to change. Subscriptions governed by Terms & Conditions available at sirius.com/ 4 Uconnect 3.0 25

able to those at least 18 years of age in the 48 contiguous United States, D.C., and PR. Service available in Canada; see www.siriuscanada.ca. This functionality is only available for radios equipped with a Satellite receiver. In order to receive satellite radio, the vehicle needs to be outside with a clear view to the sky. If the screen shows Acquiring Signal, you might have to change the vehicle’s position in order to receive a signal. In most cases, the satellite radio does not receive a signal in underground parking garages or tunnels. Audio 1. Press the AUDIO button at the button of the radio. 2. The Audio Menu shows the following options for you to customize your audio settings. Mid, Bass, Fade, Balance • Select the desired setting to adjust, then touch the Enter/Browse button. Turn the Tune/Scroll knob to adjust the setting + or - 9. Press the back button when done. Clock Setting 1. Press the Menu button at the bottom of the radio, next select the Time Format setting and then select Set Time. 2. Adjust the hours or minutes by turning the Tune/ Scroll knob, then pressing the Enter/Browse button to move to the next entry. You can also select 12hr or 24hr format by turning the Tune/Scroll knob, then pressing the Enter/Browse button on the desired selection. 3. Once the time is set press the “Back” button to exit the time screen. 26 Uconnect 3.0

located on the side of the display. Once in Media Mode, select your media Source by rotating the Scroll rotary knob and pushing the Enter button. Common Media Functions Seek Up/Down Touch and release the right arrow soft-key for the next selection. Touch and release the left arrow soft-key to return to the beginning of the current selection, or return to the beginning of the previous selection if the Disc is within the first second of the current selection. Fast Seek Up: Touch and hold the right arrow soft-key and the desired mode will begin to fast forward through the current track until the soft-key is released. Fast Seek Down: Touch and hold the left arrow soft-key and the desired mode will begin to rewind through the current track until the soft-key is released. Source Touch the Source soft-key to select the desired audio source, Disc, AUX or USB/iPod. This screen will time out after a few seconds and return to the main radio screen if no selection is made. Info Touch the Info soft-key to display the current track information. Touch the “X” soft-key to cancel this feature. Shuffle Touch the shuffle soft-key to play the selections on the USB/iPod device in random order to provide an inter- esting change of pace. Touch the soft-key a second time to turn this feature off. 4 Uconnect 3.0 27

Disc Mode If equipped, your vehicle may have a remote Disc player located in the lower center console storage bin. Disc Mode is entered by either inserting a Disc or by touching the Media button located on the side of the display. Once in Media Mode, select Disc mode. Inserting Compact Disc Gently insert one Disc into the Disc player with the Disc label following the illustration indicated on the player. The Disc will automatically be pulled into the Disc player and the Disc icon will illuminate on the radio display. If a Disc does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new Disc can be loaded. If you insert a Disc with the ignition ON and the radio ON, the unit will switch to CD/Disc mode and begin to play when you insert the Disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Browse Touch the browse soft-key to scroll through and select a desired track on the Disc. Touch the exit soft-key if you wish to cancel the browse function. Eject Button – Ejecting a Disc Press the EJECT button to eject the Disc. If you have ejected a Disc and have not removed it within 10 seconds, it will be reloaded. If the Disc is not removed, the radio will reinsert the Disc but will not play it. A Disc can be ejected with the radio and ignition OFF. 28 Uconnect 3.0

Jump Drive or iPod cable into the USB port or by touching the Media button located left of the display. Once in Media Mode, touch the source soft-key and select USB/iPod. Inserting USB/iPod Device Gently insert the USB/iPod device into the USB Port. If you insert a USB/iPod device with the ignition ON and the radio ON, the unit will switch to USB/iPod mode and begin to play when you insert the device. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Browse Touch the Browse soft-key to select Artist, Albums, Genres, Songs, Playlists or Folders from the USB/iPod device. Once the desired selection is made you can chose from the available media by touching the soft-key. Touch the exit soft-key if you wish to cancel the browse function. AUX Mode AUX Mode is entered by inserting a AUX device using a cable with a 3.5 mm audio jack into the AUX port or by touching the Media button located left of the display. Once in Media Mode, touch the source soft-key and select AUX. Inserting Auxiliary Device Gently insert the Auxiliary device cable into the AUX Port. If you insert a Auxiliary device with the ignition ON and the radio ON, the unit will switch to AUX mode and begin to play when you insert the device cable. 4 Uconnect 3.0 29

The control of the auxiliary device (e.g., selecting play- lists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead. Adjust the volume with the ON/OFF VOLUME rotary knob, or with the volume of the attached device. NOTE: The vehicle radio unit is acting as the amplifier for audio output from the Auxiliary device. Therefore if the volume control on the Auxiliary device is set too low, there will be insufficient audio signal for the radio unit to play the music on the device. 30 Uconnect 3.0

 Radio Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . .34  Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .39  Uconnect Phone . . . . . . . . . . . . . . . . . . . . . . . .43  Uconnect Voice Command. . . . . . . . . . . . . . . . .47  Settings Main Menu . . . . . . . . . . . . . . . . . . . . . .51  More Main Menu. . . . . . . . . . . . . . . . . . . . . . . .52 5

1. RADIO Press the RADIO hard-key to enter the Radio Mode. The different tuner modes; AM, FM and SXM can be selected by touching the corresponding soft-keys in the Radio Mode. 2. COMPASS Press the COMPASS hard-key to display the current direction of the vehicle. 3. SETTINGS Press the SETTINGS hard-key to access the Settings list. Clock, Display, Audio, Bluetooth and Sirius Settings are described in this manual. 4. MORE Press the MORE hard-key to access additional options. 5. ENTER/BROWSE & TUNE/SCROLL Press the ENTER/BROWSE button to accept a high- lighted selection on the screen. Rotate the TUNE/ SCROLL rotary knob to scroll through a list or tune a radio station. 32 Uconnect 5.0

screen. 7. SCREEN OFF Press the SCREEN OFF hard-key to turn the touch-screen OFF. To turn the screen back ON, just touch the screen. 8. VOLUME & MUTE Rotate the rotary knob to adjust the Volume. Press the Mute button to mute the system. 9. PHONE Press the Phone button to access the Uconnect Phone feature. 10. MEDIA Pressing the MEDIA button will allow you to switch to Media mode (CD, USB/iPOD, AUX, Bluetooth). 5 Uconnect 5.0 33

• FM • AM • SXM Sirius XM™Satellite Radio (if equipped) Touch the RADIO hard-key, to enter the Radio Mode. The different tuner modes; AM, FM, and SXM, can then, be selected by touching the corresponding soft-keys in the Radio mode. Volume & Mute • Rotate the rotary knob to adjust the Volume. When the audio system is turned on, the sound will be set at the same volume level as last played. • Press the Mute button to mute the system. Press the Mute button again to un-mute the system. Enter/Browse & Tune/Scroll Control • Turn the rotary TUNE/SCROLL control knob clock- wise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection. Seek Functions Seek Up • Touch and release the Seek Up soft-key to tune the radio to the next listenable station or channel. • During a Seek Up function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began. 34 Uconnect 5.0

• Touch and hold the Seek Up soft-key to advance the radio through the available stations or channels at a faster rate, the radio stops at the next available station or channel when the soft-key is released. Seek Down • Touch and release the Seek Down soft-key to tune the radio to the next listenable station or channel. • During a Seek Down function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began. Fast Seek Down • Touch and hold the Seek Down soft-key to advance the radio through the available stations or channel at a faster rate, the radio stops at the next available station or channel when the soft-key is released. Setting Presets The Presets are available for all Radio Modes, and are activated by touching any of the four Preset soft keys, located at the top of the screen. When you are receiving a station that you wish to commit into memory, press and hold the desired num- bered soft-key for more that 2 seconds or until you hear a confirmation beep. The Radio stores up to 12 presets in each of the Radio modes. 4 presets are visible at the top of the radio screen. Touching the “all” soft-key on the radio home screen will display all of the preset stations for that mode. SiriusXM™Satellite Radio Mode SiriusXM™Satellite Radio uses direct satellite-to-receiver broadcasting technology to provide clear digital sound, 5 Uconnect 5.0 35

SiriusXM™Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, and programming for children, directly from its satellites and broadcasting studios. A one-year SiriusXM™Satellite Radio subscription is included. SiriusXM™and all related marks and logos are trade- marks of SiriusXM™Radio Inc. and its subsidiaries. SiriusXM™Satellite Radio requires a subscription, sold separately after trial subscription included with vehicle purchase. Prices and programming are provided by SiriusXM™and are subject to change. Subscriptions governed by Terms & Conditions available at sirius.com/ serviceterms. SiriusXM™Radio U.S. service only avail- able to those at least 18 years of age in the 48 contiguous United States, D.C., and PR. Service available in Canada; see www.siriuscanada.ca. This functionality is only available for radios equipped with a Satellite receiver. In order to receive satellite radio, the vehicle needs to be outside with a clear view to the sky. If the screen shows Acquiring Signal, you might have to change the vehicle’s position in order to receive a signal. In most cases, the satellite radio does not receive a signal in underground parking garages or tunnels. Audio 1. Press the SETTINGS hard-key on the right side of the unit. 2. Then scroll down and press the Audio soft-key to get to the Audio menu. 3. The Audio Menu shows the following options for you to customize your audio settings. 36 Uconnect 5.0

and Treble. Use the + or - soft-key to adjust the equalizer to your desired settings. Press the back arrow soft-key when done. Balance/Fade • Touch the Balance/Fade soft-key to adjust the sound from the speakers. Use the arrow soft-key to adjust the sound level from the front and rear or right and left side speakers. Touch the Center C soft-key to reset the balance and fade to the factory setting. Press the back arrow soft-key when done. Speed Adjustable • Touch the Speed Adjusted Volume soft-key to select between OFF, 1, 2 or 3. This will decrease the radio volume relative to a decrease in vehicle speed. Press the back arrow soft-key when done. Loudness • Touch the Loudness soft-key to select the Loudness feature. When this feature is activated it improves sound quality at lower volumes. Clock Setting There are two ways to enter the clock setting procedure on the Uconnect 5.0 system. 1. Press the More hard-key on the right side of the display, next press the Time soft-key and then press the Set soft-key. OR Press the Settings hard-key on the right side of the display, then press the Clock soft-key. The Time setting screen is displayed and the clock can be adjusted as described in the following procedure. NOTE: In the Clock Setting Menu you can also select Display Clock. Display Clock turns the clock display in the status bar on or off. 5 Uconnect 5.0 37

minutes, next select the AM or PM soft-key. You can also select 12hr or 24hr format by touching the desires soft-key. 3. Once the time is set press the “Done” soft-key to exit the time screen. 38 Uconnect 5.0

located on the side of the display. Once in Media Mode, touch Source soft-key and the desired mode soft-key. Disc, USB, AUX and Bluetooth are the Media sources available. Common Media Functions Seek Up/Down Touch and release the right arrow soft-key for the next selection. Touch and release the left arrow soft-key to return to the beginning of the current selection, or return to the beginning of the previous selection if the Disc is within the first second of the current selection. Fast Seek Up: Touch and hold the right arrow soft-key and the desired mode will begin to fast forward through the current track until the soft-key is released. Fast Seek Down: Touch and hold the left arrow soft-key and the desired mode will begin to rewind through the current track until the soft-key is released. Source Touch the Source soft-key to select the desired audio source, Disc, AUX or USB/iPod. This screen will time out after a few seconds and return to the main radio screen if no selection is made. Info Touch the Info soft-key to display the current track information. Touch the “X” soft-key to cancel this feature. Shuffle Touch the shuffle soft-key to play the selections on the USB/iPod device in random order to provide an inter- esting change of pace. Touch the soft-key a second time to turn this feature off. 5 Uconnect 5.0 39

ing the audio settings. Disc Mode If Equipped, your vehicle may have a remote Disc player located in the lower center console storage bin. Disc Mode is entered by either inserting a CD/Disc or by touching the Media hard-key located on the side of the display. Once in Media Mode, touch the source soft-key and select Disc. Inserting Compact Disc Gently insert one Disc into the Disc player with the Disc label following the illustration indicated on the player. The Disc will automatically be pulled into the Disc player and the Disc icon will illuminate on the radio display. If a Disc does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new Disc can be loaded. If you insert a Disc with the ignition ON and the radio ON, the unit will switch to Disc mode and begin to play when you insert the Disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Browse Touch the browse soft-key to scroll through and select a desired track on the Disc. Touch the exit soft-key if you wish to cancel the browse function. Eject Button – Ejecting a Disc Press the EJECT button to eject the Disc. If you have ejected a Disc and have not removed it within 10 seconds, it will be reloaded. If the Disc is not removed, the radio will reinsert the Disc but will not play it. 40 Uconnect 5.0

USB/iPod Mode USB/iPod Mode is entered by either inserting a USB Jump Drive or iPod cable into the USB port or by touching the Media hard-key located left of the display. Once in Media Mode, touch the source soft-key and select USB/iPod. Inserting USB/iPod Device Gently insert the USB/iPod device into the USB Port. If you insert a USB/iPod device with the ignition ON, the unit will switch to USB/iPod mode and begin to play when you insert the device. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Browse Touch the Browse soft-key to select Artist, Albums, Genres, Songs, Playlists or Folders from the USB/iPod device. Once the desired selection is made you can chose from the available media by touching the soft-key. Touch the exit soft-key if you wish to cancel the browse func- tion. AUX Mode AUX Mode is entered by inserting a AUX device using a cable with a 3.5 mm audio jack into the AUX port or by touching the Media hard-key located left of the display. Once in Media Mode, touch the source soft-key and select AUX. 5 Uconnect 5.0 41

Gently insert the Auxiliary device cable into the AUX Port. If you insert a Auxiliary device with the ignition ON, the unit will switch to AUX mode and begin to play when you insert the device cable. Controlling the Auxiliary Device The control of the auxiliary device (e.g., selecting play- lists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead. Adjust the volume with the VOLUME rotary knob, or with the volume of the attached device. NOTE: The vehicle radio unit is acting as the amplifier for audio output from the Auxiliary device. Therefore if the volume control on the Auxiliary device is set too low, there will be insufficient audio signal for the radio unit to play the music on the device. Bluetooth Mode Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is entered by pairing a Bluetooth device, containing music, to the Uconnect Access system. Before proceeding, the Bluetooth device needs to be paired through Uconnect Phone in order to communi- cate with the Uconnect Access System. NOTE: See the pairing procedure in the in this manual for further details. Once the Bluetooth device is paired to the Uconnect Access System, touch the Media hard-key located on the left side of the display. Once in Media Mode, touch the source soft-key and select Bluetooth. 42 Uconnect 5.0

in-vehicle communications system with Voice Command Capability (see Voice Command section). The Uconnect Phone allows you to dial a phone number with your mobile phone using simple voice commands. NOTE: • The Uconnect Phone requires a mobile phone equipped with the Bluetooth Hands-Free Profile, Ver- sion 1.0 or higher. For Uconnect customer support, call 1–877–855–8400 or visit www.UconnectPhone.com. • Prior to starting the pairing procedure, ensure all additional Bluetooth devices or phones within the vehicle have their Bluetooth disabled. Pairing a Phone To use the Uconnect Phone feature, you must first pair your Bluetooth phone with the Uconnect system. Refer to www.UconnectPhone.com for pairing procedure unique to your phone. Start Pairing Procedure • Press the “Phone” button to begin. • Wait for the “ready” prompt and BEEP. • (After the BEEP), say “Setup Phone Pairing”. • (After the BEEP), say “Pair a Phone”. • Follow the audible prompts. • You will then be asked if paired device should be set to favorite. 5 Uconnect 5.0 43

device • Search for available devices on your Bluetooth en- abled mobile phone. This is usually within Settings or Options under “Bluetooth”. See your mobile phone’s manual for details. NOTE: For assistance in pairing your phone, contact Uconnect customer support at 1–877–855–8400 or visit www.UconnectPhone.com for phone compatibility, pair- ing instructions and details. • When your phone finds the system, select “Uconnect” as the paired device. • When prompted on the phone, enter the 4-digit PIN number shown on the radio display. • If your phone asks you to accept a connection request from Uconnect, select “Yes”. If available, check the box telling it not to ask again – that way your phone will automatically connect each time you start the vehicle. Phonebook Download – Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect Phone will ask you if you want to download names (text names) and number entries from your mobile phone’s phonebook. Specific Bluetooth Phones with Phone Book Access Profile may support this feature. See www.UconnectPhone.com for supported phones. Download and update, if supported, begins as soon as the Bluetooth wireless phone connection is made to the Uconnect Phone, for example, after you start the vehicle. 44 Uconnect 5.0

book download. • A maximum of 1000 entries per phone will be down- loaded and updated every time a phone is connected to the Uconnect Phone. • Depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, the previously downloaded phonebook is avail- able for use. • Only the phonebook of the currently connected mobile phone is accessible. • Only the mobile phone’s phonebook is downloaded. SIM card phonebook is not part of the Mobile phone- book. • This downloaded phonebook cannot be edited or deleted on the Uconnect Phone. These can only be edited on the mobile phone. The changes are trans- ferred and updated to Uconnect Phone on the next phone connection. Making A Phone Call Press the “Phone” button. (After the BEEP), say “dial” (or “call” a name). Receiving A Call – Accept (And End) When an incoming call rings or is announced on Uconnect, press the Phone button. To end a call, press the Phone button on steering wheel or the Phone soft-key on the radio screen. 5 Uconnect 5.0 45

During a call, press the “Voice Command” button. (After the BEEP), say “mute” (or “mute off”). Transfer Ongoing Call Between Handset And Vehicle During a call, press the “Voice Command” button. (After the BEEP), say “transfer call”. Changing The Volume Start a dialogue by pressing the “Phone” button , then adjust the volume during a normal call. Use the radio VOLUME rotary knob to adjust the volume to a comfortable level while the Uconnect system is speaking. Please note the volume setting for Uconnect is different than the audio system. 46 Uconnect 5.0

The Uconnect Voice Command system allows you to control your AM, FM, satellite radio, CD player, Uconnect Phone and supported portable media devices. When you press the “Voice Command” button located on the steering wheel, you will hear a beep. The beep is your signal to give a command. If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the “Voice Command” button , listen for the BEEP, and say your command. Voice Command Operation Start a dialogue by pressing the “Voice Command” button , you will hear a beep. The beep is your signal to give a command. Below are a list of voice commands for each of the different modes. NOTE: To access the tutorial, press the “Voice Com- mand” button . After the BEEP, say “tutorial”. Press any hard-key/button or touch the display (Touch-Screen radio) to cancel the tutorial. 5 Uconnect 5.0 47

Main Menu “Radio AM” (to switch to the AM mode) “Radio FM” (to switch to the FM mode) “Satellite Radio” (to switch to the Satellite mode) “Disc” (to switch to the disc mode) “USB” (to switch to the USB mode) “Bluetooth Streaming” (to switch to the Bluetooth Streaming mode) “Memo” (to switch to the memo recorder) “System Setup” (to switch to system setup) Radio AM, Radio FM Modes “Frequency 97.1” (to change to radio station 97.1) “Frequency” (to change the frequency) “Next Station” (to select the next station) “Previous Station” (to select the previous station) “Radio Menu” (to switch to the radio menu) “Main Menu” (to switch to the main menu) 48 Uconnect 5.0

SiriusXM™Satellite Radio Mode “Channel Number” (to change the channel by its spoken number) “Next Channel” (to select the next channel) “Previous Channel” (to select the previous channel) “List Channel” (to hear a list of available channels) “Channel Name” (to change the channel by its spoken name) “Radio Menu” (to switch to the radio menu) “Main Menu” (to switch to the main menu) Disc Mode “Track” (#) (to change the track) “Next Track” (to play the next track) “Previous Track” (to play the previous track) “Main Menu” (to switch to the main menu) USB Mode “Next Track” (to play the next track) “Previous Track” (to play the previous track) “Play” (to play a Artist Name, Playlist Name, Album Name, Track Name, etc.) “List” (to List a Artist, Playlist, Album, Track, etc.) Bluetooth Streaming (BT) Mode “Next Track” (to play the next track) “Previous Track” (to play the previous track) 5 Uconnect 5.0 49

If equipped with Uconnect Voice Command, your radio may be able to play incoming Short Message Service (SMS) messages (text messages) through the vehicle’s sound system. It also allows you to respond by selecting from various pre-defined phrases. Not all phones are compatible with this feature. Refer to the phone compatibility list at www.UconnectPhone.com. Connected mobile phones must be bluetooth-compatible, and paired with your radio. Press the “Voice Command” button and after the BEEP, say “SMS” to get started. WARNING! ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. 50 Uconnect 5.0

Press the Settings hard-key to display the Settings Main Menu. The Settings Main Menu contains the following options: • Display — Refer to “Understanding Your Instrument Panel”, “Uconnect Access System” section in your vehicle Owner’s Manual for details. • Clock — Refer to the “Radio” section for details. • Safety/Assistance — Refer to “Understanding Your Instrument Panel”, “Uconnect Access System” sec- tion in your vehicle Owner’s Manual for details. • Lights — Refer to “Understanding Your Instrument Panel”, “Uconnect Access System” section in your vehicle Owner’s Manual for details. • Doors & Locks — Refer to “Understanding Your Instrument Panel”, “Uconnect Access System” sec- tion in your vehicle Owner’s Manual for details. • Heated Seats — Refer to “Understanding The Features Of Your Vehicle”, “Seats” section in your vehicle Owner’s Manual for details. • Engine Off Options — Refer to “Understanding Your Instrument Panel”, “Uconnect Access System” sec- tion in your vehicle Owner’s Manual for details. • Compass Settings — Refer to “Understanding Your Instrument Panel”, “Uconnect Access System” sec- tion in your vehicle Owner’s Manual for details. • Audio — Refer to the Operating Instructions – Radio section in this manual for details. • Phone/Bluetooth — Refer to the “Uconnect Phone” section in this manual for details. • Sirius Setup — Refer to the “Radio” section in this manual for details. 5 Uconnect 5.0 51

Press the More hard-key to display the More Main Menu. The More Main Menu contains the following options: • Phone — Refer to the “Uconnect Phone” section in this manual for details. • Outlet (If Equipped) — Refer to “Understanding The Features Of Your Vehicle”, “Power Inverter” section in your vehicle Owner’s Manual for details. • Time — Refer to the Uconnect 5.0 “Radio Mode” section in this manual for details. 52 Uconnect 5.0

 Radio Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . .57 ▫Setting Presets. . . . . . . . . . . . . . . . . . . . . . . .183 ▫SiriusXM™Satellite Radio Mode . . . . . . . . . . .60 ▫Replay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 ▫Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 ▫Traffic & Weather . . . . . . . . . . . . . . . . . . . . . .64 ▫Browse in SAT . . . . . . . . . . . . . . . . . . . . . . . .64 ▫Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .70 ▫Disc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .70 ▫USB/iPod Mode . . . . . . . . . . . . . . . . . . . . . .71 ▫AUX Mode. . . . . . . . . . . . . . . . . . . . . . . . . . .73 ▫SD Card Mode . . . . . . . . . . . . . . . . . . . . . . . .74 ▫Bluetooth Mode. . . . . . . . . . . . . . . . . . . . . . .76  Uconnect Phone . . . . . . . . . . . . . . . . . . . . . . . .78 ▫Uconnect Phone Overview . . . . . . . . . . . . . . .78 ▫Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . .80 6

▫Uconnect Phone Features . . . . . . . . . . . . . . . .94 ▫Advanced Phone Connectivity . . . . . . . . . . . . .97 ▫Things You Should Know About Your Uconnect Phone . . . . . . . . . . . . . . . . . . . . . .98 ▫General Information . . . . . . . . . . . . . . . . . . .109  Uconnect Voice Command . . . . . . . . . . . . . . . .110 ▫Voice Command Overview . . . . . . . . . . . . . . .228 ▫Uconnect Voice Commands. . . . . . . . . . . . . .112  Navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . .124 ▫Navigation Registration (Uconnect 8.4A Only) . .124 ▫Getting Started . . . . . . . . . . . . . . . . . . . . . . .124 ▫Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . .124 ▫Where To?. . . . . . . . . . . . . . . . . . . . . . . . . . .125 ▫View Map. . . . . . . . . . . . . . . . . . . . . . . . . . .154 ▫View Map – Settings . . . . . . . . . . . . . . . . . . .156 ▫Information. . . . . . . . . . . . . . . . . . . . . . . . . .163 ▫Emergency . . . . . . . . . . . . . . . . . . . . . . . . . .166  Security Features . . . . . . . . . . . . . . . . . . . . . . .170 ▫Roadside Assistance – If Equipped . . . . . . . . .288 ▫9–1–1 Call – If Equipped . . . . . . . . . . . . . . . .170  Remote Service Features . . . . . . . . . . . . . . . . . .176 54 Uconnect 8.4A

1. Radio Touch the Radio soft-key to enter the Radio Mode. The different tuner modes; AM, FM and SXM can be selected by touching the corresponding soft-keys in the Radio Mode. 2. Media Touch the Media soft-key to access media sources such as: Disc, USB Device and AUX as long as the requested media is present. 3. Climate Refer to Climate Controls in your vehicles Owner’s Manual for further details. 4. Nav (If Equipped) The Uconnect 8.4A System is Navigation-ready, see your authorized dealer for details. 5. Phone Touch the Phone soft-key to access the Uconnect Phone feature. 6 Uconnect 8.4A 55

Connected vehicle options. 7. Settings Touch the Settings soft-key to display the list of available settings. Refer to Understanding Your Instrument Panel section in your vehicles Owner’s Manual for further details. 8. ENTER/BROWSE & TUNE/SCROLL Press the ENTER/BROWSE button to accept a high- lighted selection on the screen. Rotate the TUNE/ SCROLL rotary knob to scroll through a list or tune a radio station. 9. BACK Press the BACK button to return to a previous menu or screen. 10. SCREEN OFF Press the SCREEN OFF hard-key to turn the touch-screen OFF. To turn the screen back ON, just touch the screen. 11. VOLUME & MUTE Rotate the rotary knob to adjust the Volume. Press the Mute button to mute the system. 56 Uconnect 8.4A

• FM • AM • SiriusXM™Satellite Radio (if equipped) Touch the RADIO Soft Key, bottom left corner, to enter the Radio Mode. The different tuner modes; AM, FM, and SAT, can then, be selected by touching the corresponding soft-keys in the Radio mode. ON/OFF & Volume Control Push the ON/OFF Volume control knob to turn on the radio. Push the ON/OFF Volume control knob a second time to turn off the radio. The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning the Volume control knob clockwise increases the volume, and counter-clockwise decreases it. When the audio system is turned on, the sound will be set at the same volume level as last played. Tune/Scroll Control Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection. Screen Close The Red X Soft key at the top right, provides a means to close the Direct Tune Screen. The Direct Tune Screen also auto closes if no activity occurs within 10 seconds. 6 Uconnect 8.4A 57

The Seek Up and Down functions are activated by touching the double arrow soft-keys to the right and left of the radio station display, or by pressing the left Steering Wheel Audio Control (if equipped) up or down. Seek Up Touch and release the Seek Up soft-key to tune the radio to the next listenable station or channel. During a Seek Up function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began. Fast Seek Up Touch and hold the Seek Up soft-key to advance the radio through the available stations or channels at a faster rate, the radio stops at the next available station or channel when the soft-key is released. Seek Down Touch and release the Seek Down soft-key to tune the radio to the next listenable station or channel. During a Seek Down function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began. Fast Seek Down Touch and hold the Seek Down soft-key to advance the radio through the available stations or channel at a faster rate, the radio stops at the next available station or channel when the soft-key is released. Direct Tune Press the Tune soft-key located at the bottom of the radio screen. The Direct Tune soft-key screen is available in AM, FM, and SAT radio modes and can be used to direct tune the radio to a desired station or channel. 58 Uconnect 8.4A

desired station. Once a number has been entered, any numbers that are no longer possible (stations that cannot be reached) will become deactivated / grayed out. Undo You can backspace an entry by touching the bottom left Undo soft key. GO When touched, the green GO soft key allows the you to commit an entry, at which time the radio will tune to the entered station or channel and close the Direct Tune Screen. The selected Station or Channel number is displayed in the Direct Tune text box. Setting Presets The Presets are available for all Radio Modes, and are activated by touching any of the six Preset soft keys, located at the top of the screen. When you are receiving a station that you wish to commit into memory, press and hold the desired num- bered soft-key for more that 2 seconds or until you hear a confirmation beep. The Radio stores up to 12 presets in each of the Radio modes. A set of 6 presets are visible at the top of the radio screen. You can switch between the two radio presets by touch- ing the arrow soft key located in the upper right of the radio screen. 6 Uconnect 8.4A 59

When in either AM or FM, the Browse Screen provides a means to edit the Presets List and is entered by touching the browse soft key. Scrolling Preset List Once in the Browse Presets screen, you can scroll the preset list by rotation of the Tune Knob, or by touching the Up and Down arrow keys, located on the right of the screen. Preset Selection from List A Preset can be selected by touching any of the listed Presets, or by pressing the ENTER/BROWSE button on the Tune Knob to select the currently highlighted Preset. When selected, the radio tunes to the station stored in the Preset and returns to the main radio screen. Deleting Presets A Preset can be deleted in the Presets Browse screen by touching the Trash Can Icon for the corresponding Preset. Return to Main Radio Screen You can return to the Main Radio Screen, by touching the X soft key when in the Browse Presets screen. SiriusXM™Satellite Radio Mode SiriusXM™Satellite radio uses direct satellite-to-receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is SiriusXM™Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, and programming for children, directly from its satellites and broadcasting studios. A one-year SiriusXM™Satellite Radio subscription is included. 60 Uconnect 8.4A

marks of SiriusXM™Radio Inc. and its subsidiaries. SiriusXM™Radio requires a subscription, sold sepa- rately after trial subscription included with vehicle purchase. Prices and programming are provided by SiriusXM™and are subject to change. Subscriptions governed by Terms & Conditions available at sirius.com/ serviceterms. SiriusXM™Radio U.S. service only avail- able to those at least 18 years of age in the 48 contiguous United States, D.C., and PR. Service available in Canada; see www.siriuscanada.ca. This functionality is only available for radios equipped with a Satellite receiver. In order to receive satellite radio, the vehicle needs to be outside with a clear view to the sky. If the screen shows Acquiring Signal, you might have to change the vehicle’s position in order to receive a signal. In most cases, the satellite radio does not receive a signal in underground parking garages or tunnels. No Subscription Radios equipped with a Satellite receiver, require a subscription to the Sirius Service. When the Radio does not have the necessary subscription, the Radio is able to receive the Traffic/Weather channel only. Acquiring SiriusXM™Subscription To activate the Sirius subscription, call the toll free number on the Weather channel. You will need to pro- vide the Sirius ID (SID) located at the bottom of the Channel 0 screen. The Satellite Mode is activated by a touch of the SAT soft-key. When in Satellite mode: • The SXM button is highlighted. • The SiriusXM™Presets are displayed at the top of the screen. 6 Uconnect 8.4A 61

• The SiriusXM™Channel Number is displayed in the center. • The Program Information is displayed at the bottom of the Channel Number. • The SiriusXM™function soft-keys are displayed be- low the Program Information. Tuning is done by operating the Tune Knob or by Direct Tune, similar to other Radio Bands, see Presets, browse, Tune Knob, and Direct Tune. In addition to the tuning Operation functions common to all Radio modes, the replay, Traffic/Weather Jump, and fav soft-key functions are available in SiriusXM™Mode. Replay The replay function provides a means to store and replay up to 22 minutes of music audio and 48 minutes of talk radio. Once the channel is switched, content in replay memory is lost Touch the replay soft-key. The play/pause, rewind/ forward and live soft-keys will display at the top of the screen, along with the replay time. You can exit by touching the replay soft-key, any time during the Replay mode. Play/Pause Touch the Pause or Play soft-key to pause playing of the content at any time that the content is playing live or rewound content. Play can be resumed again by touching of the Pause/Play soft-key. 62 Uconnect 8.4A

of 5 seconds. Touching the RW soft-key for more than 2 seconds rewinds the content. The Radio begins playing the content at the point at which the touch is released. Forward Each touch of the FW soft-key forwards the content in steps of 5 seconds. Forwarding of the content can only be done when the content is previously rewound, and therefore, can not be done for live content. A continuous touch of the FW soft-key also forwards the content. The Radio begins playing the content at the point at which the touch is release. Live Touch the Live soft-key to resume playing of Live con- tent. Favorites Touch the fav. soft-key to activate the favorites menu, which will time out in 5 seconds in absence of user inter- action. You can exit the Favorites Menu by a touch of the X in the top right corner. The favorites feature enables you to set a favorite artist, or song that is currently playing. The Radio then uses this information to alert you when either the favorite song, or favorite artist are being played at any time by any of the SIRIUS Channels. The maximum number of favorites that can be stored in the Radio is 50. Fav. Artist While the song is playing to set a Favorite Artist, touch the fav. soft-key and then the Fav. Artist soft-key. 6 Uconnect 8.4A 63

touch the fav. soft-key and then the Fav Song soft-key. Traffic & Weather Touch the Traffic & Weather soft-key to tune to a SiriusXM™Traffic and Weather channel. To set a Traffic & Weather alert for any one of the cities in the Jump Browse list, see Browse in SAT. When the Traffic & Weather soft-key is touched, the Traffic & Weather channel is tuned. If the Traffic & Weather alert City is not set, you are presented with a pop up to allow you to select the favorite city using the Browse Screen. Browse in SAT Touch the browse soft-key to edit Presets, Favorites, Game Zone, and Jump settings, along with providing the SiriusXM™Channel List. This Screen contains many sub menus. You can exit a sub menu to get back to a parent menu by a touch of the Back Arrow. All Touch the All soft-key at the left of the Browse Screen. Channel List Touch the Channel List to display all the SiriusXM™ Channel Numbers along with the corresponding Genre. You can scroll the Channel list by touching the up and down arrows, located on the right side of the screen. Scrolling can also be done by operating the Tune/Scroll Knob. Genre Touch the Genre button to display a list of Genres. You can select any desired Genre by touching the Genre list, at which point, the Radio tunes to a channel with the content in the selected Genre. 64 Uconnect 8.4A

Browse screen. You can scroll the Presets list touching the up and down arrows, located at the right side of the screen. Scrolling can also be done by operating the Tune/Scroll Knob as well. Preset Selection A Preset can be selected by touching any of the listed Presets, or by pressing the ENTER/BROWSE button on the Tune Knob to select the currently highlighted Preset. When selected, the Radio tunes to the station stored in the Preset, and returns to the main Radio screen. Deleting a Preset A Preset can be deleted in the Presets Browse screen by touching the Trash Can Icon for the corresponding Preset. Favorites Touch the Favorites soft-key, located at the left of the Browse screen. The Favorites menu provides a means to Edit the Favor- ites list and to configure the Alert Settings, along with providing a list of Channels currently airing any of the items in the Favorites list. You can scroll the Favorites list touching the up and down arrows, located at the right side of the screen. Scrolling can also be done by operating the Tune/Scroll Knob as well. Remove Favorites Touch the Remove Favorites tab at the top of the screen. Touch the Delete All soft-key to delete all of the Favorites or touch the Trash Can icon next to the Favorite to be deleted. 6 Uconnect 8.4A 65

Alert Settings menu allows you to choose from a Visual alert or Audible and Visual alert when one of your favorites is airing on any of the SiriusXM™channels. Game Zone Touch the Game Zone soft-key, located at the left of the Browse screen. This feature provides you with the ability to select teams, edit the selection, and set alerts. On Air Touch the On-Air tab at the top of the screen. The On-Air list provides a list of Channels currently airing any of the items in the Selections list, and touching any of the items in the list tunes the radio to that channel. Select Teams Touch the Select Teams soft-key to activate the League Scroll list. Touch the chosen league and a scroll list of all teams within the league will appear, then you can select a team by touching the corresponding box. A check mark appears for all teams that are chosen. Remove Selection Touch the Remove Selection tab at the top of the screen. Touch the Delete All soft-key to delete all of the Selections or touch the Trash Can icon next to the Selection to be deleted. 66 Uconnect 8.4A

Alert Settings menu allows you to choose from “Alert me to on-air games upon start” or “Alert upon score update” or both when one or more of your selections is airing on any of the SiriusXM™channels. Audio Touch of the Audio soft-key to activate the Audio settings screen to adjust Balance\Fade, Equalizer, And Speed Adjusted Volume. You can return to the Radio screen by touching the X located at the top right. Balance/Fade Touch the Balance/Fade soft-key to Balance audio be- tween the front speakers or fade the audio between the rear and front speakers. Touching the Front, Rear, Left, or Right soft-keys or touch and drag the blue Speaker Icon to adjust the Balance/Fade. 6 Uconnect 8.4A 67

screen. Touch the + or - soft-keys, or by touching and dragging over the level bar for each of the equalizer bands. The level value, which spans between ±9, is displayed at the bottom of each of the Bands. Speed Adjusted Volume Touch the Speed Adjusted Volume soft-key to activate the Speed Adjusted Volume screen. 68 Uconnect 8.4A

the + and - buttons or by touching, and dragging over the Level Bar This alters the automatic adjustment of the audio volume with variation to vehicle speed. Volume increases automatically as speed increase to compensate for normal road noise. Surround System (If Equipped) Touch the On soft-key to activate Surround Sound. Touch Off to deactivate this feature. When Surround Sound is On, you can hear audio coming from every direction as in a movie theatre or home theatre system. 6 Uconnect 8.4A 69

the Disc soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select Disc. A “No Disc” message will be displayed on the screen in the Disc mode when a Disc is not present in the Radio. Seek Up/Down Touch and release the right arrow soft-key for the next selection on the Disc. Touch and release the left arrow soft-key to return to the beginning of the current selec- tion, or return to the beginning of the previous selection if the Disc is within the first second of the current selection. Browse Touch the browse soft-key to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the Disc. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Touch the desired soft-key on the left side of the screen. The center of the browse window shows items and it’s sub-functions, which can be scrolled by touching the Up and Down soft-keys to the right. The Scroll/Tune knob can also be used to scroll. Source Touch the Source soft-key to select the desired audio source, Disc, USB/iPod, SD Card, AUX or Bluetooth. This screen will time out after a few seconds and return to the main radio screen if no selection is made. 70 Uconnect 8.4A

ality. The Repeat soft-key is highlighted when active. The Radio will continue to play the current track, repeatedly, as long as the repeat is active. Shuffle Touch the shuffle soft-key to play the selections on the compact disc in random order to provide an interesting change of pace. Touch the soft-key a second time to turn this feature off. Info Touch the Info soft-key to display the current track information. Touch the Info soft-key a second time to cancel this feature. Tracks Touch the trks soft-key to display a pop up with the Song List. The currently playing song is indicated by an arrow and lines above and below the song title. USB/iPod Mode Overview USB/iPod Mode is entered by either inserting a USB device or iPod and cable into the USB Port or touch the iPod soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select iPod. Seek Up/Down Touch and release the right arrow soft-key for the next selection on the USB device/iPod. Touch and release the left arrow soft-key to return to the beginning of the current selection, or return to the beginning of the previous selection if the USB device/iPod is within the first second of the current selection. 6 Uconnect 8.4A 71

The left side of the browse window displays a list of ways you can browse through the contents of the USB device/ iPod. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Touch the desired soft-key on the left side of the screen. The center of the browse window shows items and it’s sub- functions, which can be scrolled by touching the Up and Down soft-keys to the right. The Scroll/Tune knob can also be used to scroll. Source Touch the Source soft-key to select the desired audio source, Disc, USB/iPod, SD Card, AUX or Bluetooth. This screen will time out after a few seconds and return to the main radio screen if no selection is made. Repeat Touch the repeat soft-key to toggle the repeat function- ality. The Repeat soft-key is highlighted when active. The Radio will continue to play the current track, repeatedly, as long as the repeat is active. Shuffle Touch the shuffle soft-key to play the selections on the USB/iPod device in random order to provide an inter- esting change of pace. Touch the soft-key a second time to turn this feature off. Info Touch the Info soft-key to display the current track information. Touch the Info soft-key a second time to cancel this feature. 72 Uconnect 8.4A

List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then press the ENTER/ BROWSE knob to start playing that track. Touching the trks soft-key while the pop up is displayed will close the pop up. Audio Refer to Radio Mode for adjusting the audio settings. AUX Mode Overview AUX Mode is entered by inserting an AUX device using a cable with a 3.5 mm audio jack into the AUX port or touch the AUX soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select AUX. Inserting Auxiliary Device Gently insert the Auxiliary device cable into the AUX Port. If you insert an Auxiliary device with the ignition ON and the radio ON, the unit will switch to AUX mode and begin to play when you insert the device cable. Controlling the Auxiliary Device The control of the auxiliary device (e.g., selecting play- lists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead. Adjust the volume with the ON/OFF VOLUME rotary knob, or with the volume of the attached device. 6 Uconnect 8.4A 73

for audio output from the Auxiliary device. Therefore if the volume control on the Auxiliary device is set too low, there will be insufficient audio signal for the radio unit to play the music on the device. Source Touch the Source soft-key to select the desired audio source, Disc, USB/iPod, SD Card, AUX or Bluetooth. This screen will time out after a few seconds and return to the main radio screen if no selection is made. Audio Refer to Radio Mode for adjusting the audio settings. SD Card Mode Overview SD Card Mode is entered by either inserting a SD Card into the USB Port or touch the SD Card soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select SD Card. Seek Up/Down Touch and release the right arrow soft-key for the next selection on the SD Card. Touch and release the left arrow soft-key to return to the beginning of the current selec- tion, or return to the beginning of the previous selection if the SD Card is within the first second of the current selection. Browse Touch the browse soft-key to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the SD Card. If 74 Uconnect 8.4A

Artists, Playlists, Albums, Songs, etc. Touch the desired soft-key on the left side of the screen. The center of the browse window shows items and it’s sub-functions, which can be scrolled by touching the Up and Down soft-keys to the right. The Scroll/Tune knob can also be used to scroll. Source Touch the Source soft-key to select the desired audio source, Disc, USB/iPod, SD Card, AUX or Bluetooth. This screen will time out after a few seconds and return to the main radio screen if no selection is made. Repeat Touch the repeat soft-key to toggle the repeat function- ality. The Repeat soft-key is highlighted when active. The Radio will continue to play the current track, repeatedly, as long as the repeat is active. Shuffle Touch the shuffle soft-key to play the selections on the SD Card device in random order to provide an interesting change of pace. Touch the soft-key a second time to turn this feature off. Info Touch the Info soft-key to display the current track information. Touch the Info soft-key a second time to cancel this feature. Tracks Touch the trks soft-key to display a pop up with the Song List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then press the ENTER/ BROWSE knob to start playing that track. 6 Uconnect 8.4A 75

will close the pop up. Audio Refer to Radio Mode for adjusting the audio settings. Bluetooth Mode Overview Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is entered by pairing a Bluetooth device, containing music, to the Uconnect Access system. Before proceeding, the Bluetooth device needs to be paired through Uconnect Phone in order to communi- cate with the Uconnect Access System. NOTE: See the pairing procedure in the Uconnect Phone section for more details. To access Bluetooth mode, touch the Bluetooth soft-key on the left side of the display. Seek Up/Down Touch and release the right arrow soft-key for the next selection on the Bluetooth device. Touch and release the left arrow soft-key to return to the beginning of the current selection, or return to the beginning of the previous selection if the Bluetooth device is within the first second of the current selection. Source Touch the Source soft-key to select the desired audio source, Disc, USB/iPod, SD Card, AUX or Bluetooth . This screen will time out after a few seconds and return to the main radio screen if no selection is made. Tracks Touch the trks soft-key to display a pop up with the Song List. The currently playing song is indicated by a blue arrow and lines above and below the song title. 76 Uconnect 8.4A

will close the pop up. Audio Refer to Radio Mode for adjusting the audio settings. 6 Uconnect 8.4A 77

Uconnect Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect Phone allows you to dial a phone number with your mobile phone. Uconnect Phone supports the following features: Voice Activated Features: • Hands Free dialing via Voice (“Call John Smiths Mobile” or, “Dial 248 555-1212”). • Hands Free text to speech listening of your incoming SMS messages. • Hands Free text messaging (“Send a message to John Smiths Mobile”). • Redialing last dialed numbers (“Redial”). • Calling Back the last incoming call number (“Call Back”). • View Call logs on screen (“Show incoming calls”, “Show Outgoing calls”, “Show missed Calls”, “Show Recent Calls”). • Searching Contacts phone number (“Search for John Smith Mobile”). Screen Activated Features • Dialing via Keypad using touch-screen. • Viewing and Calling contacts from Phonebooks dis- played on the touch-screen. • Setting Favorite Contact Phone numbers so the are easily accessible on the Main Phone screen. • Viewing and Calling contacts from Recent Call logs. • Reviewing your recent Incoming SMS. 78 Uconnect 8.4A

• Listen to Music on your Bluetootht Device via the touch-screen. • Pairing up to 10 phones/audio devices for easy access to connect to them quickly. NOTE: Your phone must be capable of SMS messaging via Bluetooth for messaging features to work properly. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect Phone. For Uconnect customer support, visit the following website: • www.UconnectPhone.com • or call 1–877–855–8400 Uconnect Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. WARNING! Any voice commanded system should be used only in safe driving conditions and all attention should be kept on the roadway ahead. Failure to do so may result in an accident causing serious injury or death. The Uconnect Phone is driven through your Bluetooth “Hands-Free Profile” mobile phone. Uconnect features Bluetooth technology - the global standard that enables different electronic devices to connect to each other without wires or a docking station, so Uconnect Phone works no matter where you stow your mobile phone (be it your purse, pocket, or briefcase), as long as your phone is turned on and has been paired to the vehicle’s Uconnect Phone. The Uconnect Phone allows up to ten mobile phones or audio devices to be linked to the 6 Uconnect 8.4A 79

one audio device can be used with the system at a time. The system is available in English, Spanish, or French languages. Uconnect Phone Button The Uconnect Phone Button is used to get into the phone mode and make calls, show recent, incoming, outgoing calls, view phone- book etc., When you press the button you will hear a BEEP. The beep is your signal to give a command. Uconnect Voice Command Button The Uconnect Voice Command Button is only used for “barge in” and when you are already in a call and you want to send Tones or make another call. The button is also used to access the Voice Com- mands for the Uconnect Voice Command features if your vehicle is equipped. Please see the Uconnect Voice Command section for direction on how to use the button. The Uconnect Phone is fully integrated with the vehi- cle’s audio system. The volume of the Uconnect Phone can be adjusted either from the radio volume control knob or from the steering wheel radio control (right switch), if so equipped. Operation Voice commands can be used to operate the Uconnect Phone and to navigate through the Uconnect Phone menu structure. Voice commands are required after most Uconnect Phone prompts. There are two general meth- ods for how Voice Command works: 1. Say compound commands like “Call John Smith mobile”. 2. Say the individual commands and allow the system to guide you to complete the task. 80 Uconnect 8.4A

guided through the available options. • Prior to giving a voice command, one must wait for the beep, which follows the “Listen” prompt or another prompt. • For certain operations, compound commands can be used. For example, instead of saying “Call” and then “John Smith” and then “mobile”, the following com- pound command can be said: “Call John Smith mobile”. • For each feature explanation in this section, only the compound command form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the compound command form voice command “Search for John Smith”, or you can break the compound command form into two voice commands: “Search Contact” and when asked “John Smith”. Please remember, the Uconnect Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/ meters away from you. Natural Speech Your Uconnect Phone Voice system uses a Natural Language Voice Recognition (VR) engine. Natural speech allows the user to speak commands in phrases or complete sentences. The system filters out certain non-word utterances and sounds such as “ah” and “eh”. The system handles fill-in words such as “I would like to”. The system handles multiple inputs in the same phrase or sentence such as “make a phone call” and “to Kelly Smith”. For multiple inputs in the same phrase or sen- tence, the system identifies the topic or context and provides the associated follow-up prompt such as “Who 6 Uconnect 8.4A 81

requested but the specific name was not recognized. The system utilizes continuous dialog; when the system requires more information from the user it will ask a question to which the user can respond without pressing the Voice Command button. Voice Command Tree Refer to “Voice Tree” in this section. Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say “Help” following the beep. To activate the Uconnect Phone from idle, simply press the button and say a command or say “help”. All Uconnect Phone sessions begin with a press of the button on the radio control head. Cancel Command At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu. You can also press the or buttons when the system is listening for a command and be returned to the main or previous menu. NOTE: Pressing the or buttons while the system is playing is known as “Barging In”, refer to “Barge In — Overriding Prompts” for further information. Pair (Link) Uconnect Phone To A Mobile Phone To begin using your Uconnect Phone, you must pair your compatible Bluetooth enabled mobile phone. To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The Uconnect web- site may also provide detailed instructions for pairing. 82 Uconnect 8.4A

complete this procedure. • The vehicle must be in PARK. 1. Press the “Phone” soft-key on the screen to begin. 2. If there is no phone currently connected with the system, a pop-up will appear. 3. Select Yes to begin the pairing process. Then, search for available devices on your Bluetooth enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect screen. • If No is selected, touch the “Settings” soft-key from the Uconnect Phone main screen, • Touch the “Add Device” soft-key, • Search for available devices on your Bluetooth enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect screen, • See Step 4 to complete the process. 4. Uconnect Phone will display an in progress screen while the system is connecting. 5. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting Yes will make this phone the highest priority. This phone will take precedence over other paired phones within range. 6 Uconnect 8.4A 83

• Touch the “Settings” soft-key from the Phone main screen, • Next, touch the “Phone/Bluetooth” soft-key, • Touch the “Add Device” soft-key, • Search for available devices on your Bluetooth enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect screen, • Uconnect Phone will display an in process screen while the system is connecting, • When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting Yes will make this phone the highest priority. This phone will take pre- cedence over other paired phones within range. NOTE: For phones which are not made a favorite, the phone priority is determined by the order in which it was paired. The latest phone paired will have the higher priority. 84 Uconnect 8.4A

the Paired Phone screen from any screen on the radio: • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth Streaming Audio Device • Touch the “Player” or “Media” soft-key to begin, • Change the Source to Bluetooth, • Touch the “Bluetooth” soft-key to display the Paired Audio Devices screen, • Touch the “Add Device” soft-key, NOTE: If there is no device currently connected with the system, a pop-up will appear. • Search for available devices on your Bluetooth enabled audio device. When prompted on the device, enter the name and PIN shown on the Uconnect screen, • Uconnect Phone will display an in process screen while the system is connecting, • When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite device. Selecting Yes will make this device the highest priority. This device will take precedence over other paired devices within range. NOTE: For devices which are not made a favorite, the device priority is determined by the order in which it was paired. The latest device paired will have the higher priority. You can also use the following VR command to bring up a list of paired audio devices. • “Show Paired Audio Devices” 6 Uconnect 8.4A 85

Audio Device Uconnect Phone will automatically connect to the high- est priority paired phone and/or Audio Device within range. If you would need to choose a particular phone or Audio Device follow these steps: • Touch the “Settings” soft-key, • Touch the “Phone/Bluetooth” soft-key, • Touch to select the particular Phone or the “Paired Audio Sources” soft-key and then an Audio Device, • Touch the X to exit out of the Settings screen. Disconnecting A Phone or Audio Device • Touch the “Settings” soft-key, • Touch the “Phone/Bluetooth” soft-key, • Touch the + soft-key located to the right of the device name, • The options pop-up will be displayed, • Touch the “Disconnect Device” soft-key, • Touch the X to exit out of the Settings screen. Deleting A Phone Or Audio Device • Touch the “Settings” soft-key, • Touch the Phone/Bluetooth soft-key, • Touch the + soft-key located to the right of the device name for a different Phone or Audio Device than the currently connected device, • The options pop-up will be displayed, • Touch the “Delete Device” soft-key, • Touch the X to exit out of the Settings screen. 86 Uconnect 8.4A

• Touch the “Settings” soft-key, • Touch the “Phone/Bluetooth” soft-key, • Touch the + soft-key located to the right of the device name, • The options pop-up will be displayed, • Touch the “Make Favorite” soft-key; you will see the chosen device move to the top of the list, • Touch the X to exit out of the Settings screen. Phonebook Download — Automatic Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect Phone automatically downloads names (text names) and number entries from the mobile phone’s phonebook. Specific Bluetooth Phones with Phone Book Access Profile may support this feature. See Uconnect website for supported phones. • To call a name from a downloaded mobile phonebook, follow the procedure in “Call by Saying a Name” section. • Automatic download and update, if supported, begins as soon as the Bluetooth wireless phone connection is made to the Uconnect Phone, for example, after you start the vehicle. • A maximum of 1000 entries per phone will be down- loaded and updated every time a phone is connected to the Uconnect Phone. • Depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, the previously downloaded phonebook is avail- able for use. 6 Uconnect 8.4A 87

phone is accessible. • This downloaded phonebook cannot be edited or deleted on the Uconnect Phone. These can only be edited on the mobile phone. The changes are trans- ferred and updated to Uconnect Phone on the next phone connection. Managing Your Favorite Phonebook There are three ways you can add an entry to your Favorite Phonebook. 1. During an active call of a number to make a favorite, touch and hold a favorite button on the top of the phone main screen. 2. After loading the mobile phonebook, select phone- book from the Phone main screen, then select the appropriate number. Touch the + next to the selected number to display the options pop-up. In the pop-up select “Add to Favorites”. NOTE: If the Favorites list is full, you will be asked to remove an existing favorite. 3. From the Phone main screen, select phonebook. From the phonebook screen, select the “Favorites” soft-key and then select the + soft-key located to the right of the phonebook record. Select an empty entry and touch the + on that selected entry. When the Options pop-up appears, touch “Add from Mobile”. You will then be asked which contact and number to choose from your mobile phonebook. When complete the new favorite will be shown. 88 Uconnect 8.4A

• To remove a Favorite, select phonebook from the Phone main screen. • Next select Favorites on the left side of the screen and then touch the + Options soft-key. • Touch the + next to the Favorite you would like to remove. • The Options pop-up will display, touch “Remove from Favs”. Phone Call Features The following features can be accessed through the Uconnect Phone if the feature(s) are available and sup- ported by Bluetooth on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Uconnect Phone. Check with your mobile service provider for the features that you have. Ways To Initiate A Phone Call Listed below are all the ways you can initiate a phone call with Uconnect Phone. • Redial • Dial by touching in the number • Voice Commands (Dial by Saying a Name, Call by Saying a Phonebook Name, Redial, or Call Back) • Favorite Phonebook • Mobile Phonebook • Recent Call Log • SMS Message Viewer NOTE: All of the above operations except Redial can be done with 1 call or less active. 6 Uconnect 8.4A 89

• Press the button to begin, • After the “Listening” prompt and the following beep, say “Dial 248-555-1212”, • The Uconnect Phone will dial the number 248-555-1212. Call By Saying A Phonebook Name • Press the button to begin, • After the “Listening” prompt and the following beep, say “Call John Doe Mobile”, • The Uconnect Phone will dial the number associated with John Doe, or if there are multiple numbers it will ask which number you want to call for John Doe. Call Controls The touch-screen allows you to control the following call features: • Answer • End • Ignore • Hold/unhold • Mute/unmute • Transfer the call to/from the phone • Swap 2 active calls • Join 2 active calls together 90 Uconnect 8.4A

• Touch the “Phone” soft-key, • Touch the “Dial” soft-key, • The Touch-Tone screen will be displayed, • Use the numbered soft-keys to enter the number and touch “Call”. To send a touch tone using Voice Recognition (VR), press the button while in a call and say “Send 1234#” or you can say “Send Voicemail Password” if Voicemail password is stored in your mobile phonebook. Recent Calls You may browse up to 34 of the most recent of each of the following call types: • Incoming Calls • Outgoing Calls • Missed Calls • All Calls These can be accessed by touching the “recent calls” soft-key on the Phone main screen. You can also press the button and say “Show my incoming calls” from any screen and the Incoming calls will be displayed. You can also press the button and say “Show my recent calls” from any screen and the All calls screen will be displayed. NOTE: Incoming can also be replaced with “Outgoing”, “Recent” or “Missed”. Answer Or Ignore An Incoming Call — No Call Currently In Progress When you receive a call on your mobile phone, the Uconnect Phone will interrupt the vehicle audio system, 6 Uconnect 8.4A 91

Press the button to accept the call. To ignore the call, touch the “Ignore” soft-key on the touch-screen. You can also touch the “answer” soft-key or touch the caller ID box. Answer Or Ignore An Incoming Call — Call Currently In Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your mobile phone. Press the phone button, answer soft- key or caller ID box to place the current call on hold and answer the incoming call. NOTE: The Uconnect Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore it. Making A Second Call While Current Call Is In Progress To make a second call while you are currently on a call, press the button and say “Dial” or “Call” followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progress. Or you can place a call on hold by touching the Hold soft-key on the Phone main screen, then dial a number from the dialpad, recent calls, SMS Inbox or from the phonebooks. To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer to “Join Calls” in this section. Place/Retrieve A Call From Hold During an active call, touch the “Hold” soft-key on the Phone main screen. 92 Uconnect 8.4A

If two calls are in progress (one active and one on hold), touch the “Swap” soft-key on the Phone main screen. Only one call can be placed on hold at a time. You can also press the button to toggle between the active and held phone call. Join Calls When two calls are in progress (one active and one on hold), touch the “Join Calls” soft-key on the Phone main screen to combine all calls into a Conference Call. Call Termination To end a call in progress, momentarily press the but- ton or the end soft-key. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on hold may not become active automati- cally. This is cell phone-dependent. Redial • Press the “Redial” soft-key, • or press the and after the “Listening” prompt and the following beep, say “Redial”, • After the “Listening” prompt and the following beep, say “Redial”, • The Uconnect Phone will call the last number that was dialed from your mobile phone. Call Continuation Call continuation is the progression of a phone call on the Uconnect Phone after the vehicle ignition key has been switched to OFF. NOTE: The call will remain within the vehicle audio system until the phone becomes out of range for the Bluetooth connection. It is recommended to press the “transfer” soft-key when leaving the vehicle. 6 Uconnect 8.4A 93

Roadside Assistance If you need roadside assistance: • Press the button to begin. • After the “Listening” prompt and the following beep, say “Roadside Assistance”. NOTE: • The roadside assistance call may also be initiated by touch. • The roadside assistance number dialed is based on the country where the vehicle is purchased (1-800-528-2069 for the U.S., 1-877-213-4525 for Canada, 55-14-3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). Please refer to the Chrysler Group LLC 24-Hour “Roadside Assistance” coverage details in the Warranty Information Booklet and on the 24–Hour Roadside Assistance Card. Voice Mail Calling To learn how to access your voice mail, refer to “Working with Automated Systems”. Working With Automated Systems This method is used in instances where one generally has to press numbers on the mobile phone keypad while navigating through an automated telephone system. You can use your Uconnect Phone to access a voice mail system or an automated service, such as a paging service or automated customer service line. Some services re- quire immediate response selection. In some instances, that may be too quick for use of the Uconnect Phone. When calling a number with your Uconnect Phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can utilize the touch-screen or press the button and say the word “Send” then the sequence you wish to enter. For example, 94 Uconnect 8.4A

4 6 #), you can press the button and say, “Send 3 7 4 6 #”. Saying “Send” followed by a number, or sequence of numbers, is also to be used for navigating through an automated customer service center menu structure, and to leave a number on a pager. You can also send stored mobile phonebook entries as tones for fast and easy access to voice mail and pager entries. For example, if you previously created a Phone- book entry with First and/or Last Name as “Voicemail Password”, then if you press the button and say “Send Voicemail Password” the Uconnect Phone will then send the corresponding phone number associated with the phonebook entry, as tones over the phone. NOTE: • The first number encountered for that contact will be sent. All other numbers entered for that contact will be ignored. • You may not hear all of the tones due to mobile phone network configurations. This is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature. • Pauses, wait or other characters that are supported by some phones are not supported over Bluetooth. These additional symbols will be ignored in the dialing a numbered sequence. Barge In — Overriding Prompts The button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “There are 2 numbers with the name John. Say the full name” you could press the button and say, “John Smith” to select that option without having to listen to the rest of the voice prompt. 6 Uconnect 8.4A 95

It is possible for you to choose between Brief and Detailed Voice Response Length. • Touch the “More” soft-key (where available), then touch the “Settings” soft-key, • Touch the “Display” soft-key, then scroll down to Voice Response Length, • Select either “Brief” or “Detailed” by touching the box next to the selection. A check-mark will appear to show your selection. Phone And Network Status Indicators Uconnect Phone will provide notification to inform you of your phone and network status when you are attempt- ing to make a phone call using Uconnect Phone. The status is given for network signal strength and phone battery strength. Dialing Using The Mobile Phone Keypad WARNING! Your new vehicle has many features for the comfort and convenience of you and your passengers. Some of these should not be used when driving because they take your eyes from the road or your attention from driving. Never dial using the mobile phone keypad while driving. You can dial a phone number with your mobile phone keypad and still use the Uconnect Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth mobile phone, the audio will be played through your vehicle’s audio system. The Uconnect Phone will work the same as if you dial the number using voice a command. 96 Uconnect 8.4A

dial ring to the Uconnect Phone to play it on the vehicle audio system, so you will not hear it. Under this situa- tion, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio. Mute/Un-Mute (Mute ON/OFF) When you mute the Uconnect Phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the Uconnect Phone simply touch the Mute button on the Phone main screen. Advanced Phone Connectivity Transfer Call To And From Mobile Phone The Uconnect Phone allows ongoing calls to be trans- ferred from your mobile phone to the Uconnect Phone without terminating the call. To transfer an ongoing call from your paired mobile phone to the Uconnect Phone or vice versa, press the Transfer button on the Phone main screen. Connect Or Disconnect Link Between The Uconnect Phone And Mobile Phone If you would like to connect or disconnect the Bluetooth connection between a Uconnect Phone paired mobile phone and the Uconnect Phone, follow the instructions described in your mobile phone User’s Manual. 6 Uconnect 8.4A 97

Phone Voice Command • For best performance, adjust the rearview mirror to provide at least ½ in (1 cm) gap between the overhead console (if equipped) and the mirror. • Always wait for the beep before speaking. • Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that no one other than you is speaking during a voice command period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some. • When navigating through an automated system such as voice mail, or when sending a page, before speaking the digit string, make sure to say “Send”. • It is recommended that you do not store names in your favorites phonebook while the vehicle is in motion. • Phonebook (Mobile and Favorites) name recognition rate is optimized when the entries are not similar. • You can say “O” (letter “O”) for “0” (zero). 98 Uconnect 8.4A