iColor 600 Quick Start Manual

and check the components. 2. Open the front door and top lid of the printer. 4. Install the Uninet IColor Printer Driver. • Insert the provided USB Flash drive, and select “Uninet IColor Software” NOTE: Only connect the Printer to the PC when prompted to by the software. 6. Install the Uninet IColor TransferRIP software A. Insert the dongle into an available USB port. – The TranferRIP software is located on still the inserted Uninet IColor Software USB Drive. B. When prompted, enter the Update Code. – Your code is in a text file on the UniNet iColor Software USB Drive. – Please copy and paste the entire string of code. C. The date below will automatically populate. D. Then select “Close”. 5. Connect the power cord and USB cable to the printer. Power on the printer. www.icolorprint.com 3. Remove orange security tape, protective sheet and packing material from around the printer. A. Remove the toner and drum cartridges and remove the protective orange tape and protective sheeting from each. B. Lock the blue lever forward. C. Reinstall the cartridges. * Please note the blue handle on the white cartridge is already in the locked position * • Do Not Remove After Installation Quick Start Guide For detailed instructions please refer to the Uninet IColor 600 Printer User Manual and the Uninet IColor TransferRIP User Manual Digital Color + White Transfer Printer Digital Color + White Transfer Printer

Note: Recommend using of the MPT Tray Underprinting White • Typically used for right side reading applications such as printing color on clear or dark medias Overprinting White/Clear • Typically used for garment decoration 9. Load Files Step 4 A. Select your paper size B. Select load file C. Select preview graphic 10. Color Adjustments Step 4 A. Make any desired color adjustments to the artwork. B. Select “Next”. 11. Modify the White Coverage Step 5 A. Depending on media and artwork, make adjustments to the artwork. B. Select “Next”. Note: 150% to 250% is suggested for most applications. Use of the “Underfilling” feature is highly recommended. 12. Printing Step 6 • Adjust settings to print the artwork based on the media being used. • Select “Print”. • When prompted, select the “online” button on the front panel of the printer to print the job. 7. Install the Uninet IColor TransferRIP software Step 2 • Import the two profiles for white under print or white/clear over printing – CMYK Black Toner – CMYW White Toner – The profiles are located on the Uninet IColor Software USB Drive 8. Color Mapping Step 3 A. Choose the desired profile based on the Black or White cartridge being installed. B. Select on “Color Mapping”. C. Choose the desired color mapping option. – The location of the cartridges in the printer must match the mapping in the software. D. Select “Save” and select the desired profile. Black/White/Clear Yellow Magenta Cyan REAR FRONT Black/White/Clear Yellow Magenta Cyan REAR FRONT