hygena Matrix Large Sideboard Assembly Instructions Manual

Depth - 40cm Height - 80cm Matrix Large Sideboard Assembly Instructions - Please keep for future reference 614/2151 Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline : 03456 400800 issue 1 08/06/16 hygena

recommend the use of power drill/ drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers. Warning: The unit weighs approximately 53.5kgs. Please lift with care. 1 Safety and Care Advice Important - Please read these instructions fully before starting assembly Check you have all the components and tools listed on pages 2 and 3. plastic bags and separate them into their groups. Remove all fittings from the Keep children and animals away from the work area, small parts could choke if swallowed. Make sure you have enough space to layout the parts before starting. Do not stand on the panels, this could cause damage. Assemble the unit as close to its final position (in the same room) as possible. Assemble on a soft level surface to avoid damaging the unit or your floor. Parts of the assembly will be easier with 2 people. Dispose of all packaging carefully and responsibly. ●Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners. ●From time to time check that there are no loose screws on this unit. ●This product should not be discarded with household waste. Take to your local authority waste disposal centre. Care and maintenance Glass safety • Keep these instruction for future reference. • If the glass is chipped or broken, stop using the product and consult the Manufacturer or Supplier. • Imported by: Argos Ltd. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. Mk9 2NW • Batch No: • Date of Manufature: • Type of glass used: 5mm and 8mm toughened glass. Warnings (a) Do not place very hot or very cold items on the glass surface(s) unless adequately thick mats are used to prevent such items from coming into contact with the glass. (b) Do not sit or stand upon the glass surface(s). (c) Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed items. (d) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if necessary, do not use washing powders or any other substance containning abrasives since these substances cscratch glass.

1 Components - Panels Please check you have all the panels listed below 2 If you have damaged or missing components, call the Customer Helpline : 03456 400800 (39.9 x 15.1 cm) (39.9 x 15.1cm) 2 Top left side panel 3 Top middle panel (36.7 x 15.1cm) 4 Glass Top (120 x 40cm) 5 Top panel (120 x 40cm) 6 Bottom panel (120 x 40cm) 7 Top back panel (106.5 x 15.1cm) 8 Lower right side panel (58 x 39.9cm) 9 Lower left side panel (58 x 39.9cm) 10 Lower middle panel (58 x 34cm) 11 Back panel (109.4 x 61cm) 13 Shelf x 2 12 Supporting panel x 2 (52.4 x 3.5cm) 14 Metal tube x 4 (58 x 3.8cm) 15 Metal tube x 4 (14 x 3.8cm) (52.5 x 33.9cm) 16 Metal tube x 4 (3.2 x 3.8cm)

Please check you have all the panels listed below If you have damaged or missing components, call the Customer Helpline : 03456 400800 17 Left drawer front panel (52.8 x 13cm) 18 Right drawer front panel (52.8 x 13cm) 19 Left drawer side panel x 2 (34 x 8cm) 20 Right drawer side panel x 2 (34 x 8cm) Drawer back panel x 2 (47.6 x 8cm) 21 Drawer bottom x 2 (48.6 x 33.8cm) 22 Glass door x 2 (57.2 x 52.8cm) 23 Foot (3.2 x 3cm) 24 3

15mm Locking nut x 10 12mm Locking nut x 8 Dowel 30mm x 24 38mm Screw x 13 15mm Screw x 20 Phillips screwdriver (medium & large) Flatblade screwdriver (medium) Small hammer Ruler/tape measure Components - Fittings Please check you have all the fittings listed below Tools required Ruler - Use this ruler to help correctly identify the screws A B C D E F G H 4 Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 Left drawer runner x 2 12mm Screw x 20 I Left side runner x 2 Right drawer runner x 2 J K Right side runner x 2 L 7mm Masonary drill bit (Drill holes for wall plug) Eye protection (when using a hammer or glue) Drill (for use with wall plug) Shelf support x 8 M O 45mm Screw x 16 N Wall strap x 2 Q 15mm Screw x 2 R P 25mm Screw x 2 S Wall plug x 2 S T U V Right hinge set x 2 Left hinge set x 2 Counterplate x 2 Door catch set screw x 8 SW Ease door assembly spring x 4 SX 60mm Screw x 12 Door catch set x 2 SY Pad x 2

Step 3 Attaching runner Fix runner onto Top right side panel by using 3 pcs of Screw to fix as shown. 1 D A E A A A D E 1 2 I K Attaching runner Top left side panel by using 3 pcs of Screw . I 2 G Step 2 Attaching Locking pin Fix 2 pcs of Locking pin . A Step 3 2 Top right side panel by using 3 pcs of . G K 1 Step 4 Attaching Locking pin Fix 2 pcs of Locking pin 1 D and Dowel into Top left side panel and Dowel into Top right side panel I E K E

Top middle panel K b y using 3 pcs G Attaching runner Fix runner onto Top middle panel by using 3 pcs of Screw E I G Step 5 Step 7 Stick Pad Fix Stick Pad onto Top middle panel . Y Step 5 Step 8 3 . Insert Dowel into Attaching panel Fix Top back panel with side panel 7 1 & . 2 of Screw . D Top middle panel . 3 Insert Dowel into Top D back panel . 3 3 K E I E

7 Step 9 M 3 2 1 7 Assembly Instructions Attaching panel Fix Top middle panel onto the unit by using 2 pcs of Screw . 3 M Step 3 Step 10 Attaching panel Insert 2 pcs of dowel onto the Supporting panel . Step 3 Step 11 Attaching panel 12 Fix top onto panels b y using 1 M 5 2 3 7 8 pcs of Screw . D Fix Supporting panel 12 onto the unit with Screw F . 5 12 12 F 12 D 5 1 2 3 7 7

8 c into Top . A 1 Step 12 44 X 44 4 15 Assembly Instructions Fix 4 pcs of Screw onto glass top . Attaching Screws 4 X Step 4 Step 13 Attaching Metal tube Fix 4 pcs of metal tube 15 onto the Screw . X Step 4 Step 14 Attaching Screw Fix 4 pcs of screw onto glass top . X 4 c: 44 4 15 X

o nto the 4 pcs of metal tube . 5 15 Step 16 Attaching locking pin Insert Locking pin into A 5 Step 17 Attaching door catch set Fix door catch set onto the Top panel with Screw as shown. 5 W Insert 2 pcs of Door assembly spring onto the Top panel . 5 panel . V U W W 45 U V U V

Fix attach 4 pcs of metal tube onto 4 pcs of Screw . 14 Step 20 Attaching side panel Fix side panel 8 9 10 4 14 4 14 X X X X Step 19 Attaching side panel and middle panel 8 9 10 X Attaching Dowel Insert Dowel into D D D panel . 48 4 10 49 48 49 4 10 B B using locking nut . B

o nto metal tubes . X 4 14 Step 22 Attaching Panel Fix Insert Door assembly s pring onto Bottom panel W W 4 24 X X 48 4 10 49 46 Attaching Foot onto . 4 24 Bottom panel with Screw 46 F . Step 23 Attaching Panel Fix Bottom panel 46 the unit with Screw M . onto

Screwing metal tube 4 16 4 6 . 4 16 4 6 . Step 25 Attaching back panel Fix back panel this unit by using Screw . G onto panel 11 onto 20 pcs

Attaching mounting strap O Top back panel by using the Screw . Step 27 Insert 8 pcs of shelf Attaching shelf support at the proper position of panel L 8 9 10 Place the shelf onto 13 the unit. 9 10 8 7 7 P

Make sure the p arts as shown is S the correct one for assembly at this stage. R CAUTION: Before tighten the glass with the parts , Please ensure the parts, S R align to the edge of the glass door . 23 23 Attaching door Two people are required h ere. a:Attach glass door onto the unit. 23 23 b:Fix by tools as shown. R R S S

glass with parts S align to the glass door . Two people are required h ere. 23 23 Attach parts as shown Attach parts as shown. S T T 23 23 T T

Left drawer runner onto the Drawer left . E a: c: Use Screws to fix Drawer left Drawer right onto Drawer back . H J H E 19 b: Use Screws to fix Right drawer runner onto the Drawer right . E J 20 c: F 19 20 21 d: d: Screwing Locking pins c into Drawer front . A 17 e: e: Drawer bottom should be ,drawer front is . Use Locking nuts to fix Drawer front onto the unit. C 22 17 A C C 16 19 E H 20 H J E E b: 17 19 21 F F A A 18 A A 18 18 20 22 C C 17 22 C C 22

into the unit as shown. 17 18

Step 34 Fixing to wall Assembly is complete. It is strongly recommended that the unit is attached to the wall using Wall strap C . Q a: With help, place the unit in the intend position. b: Drill a hole in the wall at an appropriate position and insert Wall plug . To secure the unit, fix Wall strap to the wall using Screw . O N Q Note: It would be useful to ask someone to help you at this stage. Important: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs supplied are suitable for supporting the unit. Consult a qualified tradesperson if you are not sure. a: b: O N Q 18