La Crosse Equity 20860 Manual 

Equity provides a 2-year limited warranty on this product from the date of consumer purchase against defects for material and workmanship. During this period such defects will be repaired, or the product will be replaced at Equity’s option, without charge. This warranty does not cover damage caused by misuse or negligence. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD ENDING TWO YEARS FROM DATE OF PURCHASE. Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. If your product is not working properly, please send: Your product A letter explaining the problem and $5.00 for postage and handling to: Equity by La Crosse Warranty Department 2830 26th St S. La Crosse, WI 54601 www.lacrossetechnology.com/support WARRANTY & SUPPORT Page | 4 Made in China - Printed in China 7-INCH COOL MIST WALL/TABLE CLOCK WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov

most suitable for intended use. • Clean the battery contacts and also those of your clock prior to battery installation. • Ensure the battery is installed with correct polarity (+ and -). • Remove battery from equipment when it is not used for an extended period of time. • Promptly remove an expired battery. CARE & MAINTENANCE Battery Requirements: 1 AA (IEC LR6) required in movement (Alkaline recommended) Battery life: 12 months SPECIFICATIONS POWER UP 1. Insert 1 fresh AA battery into your clock according to the polarity markings. 2. Rotate the Time Set Wheel to set your time. 3. Enjoy! Battery Compartment Time Set Wheel Note: The quartz movement will keep the clock running accurately. If the clock does not operate, or steadily loses time, replace the battery. POSITION AA Page | 2 Page | 3 • Mount your clock on a wall using the hanging hole on the back of the clock. • Place you clock on desk or table.