Itec CONFERENCE-SET Manual
Text of the manual
Designed and Manufactured by
ITEC Tontechnik und
Industrieelektronik GesmbH
8200 Laßnitzthal 300
Austria / Europe
CONFERENCE-SET
MANUAL
Conferences and podium discussions usually require operating multiple microphones. With every
additional active microphone, the risk of acoustic feedback increases. Additionally, doubling the
number of microphones translates to a reduction of the maximum volume level of 3 dB. Furthermo-
re, you ex
STEP-BY-STEP INSTRUCTION - ITEC “MICRO-MIX-4”
1.)
Connect the microphones to the 3-pin mic plugs on the MICRO-MIX 4 (IN 1 to IN 4). Use
microphones of the same type and construction ONLY!
2.)
Connect the Y-cable to the 5-pin plug on the MICRO-MIX 4 (DC IN / AUDIO OUT)
3.)
The other end of the Y-cable has 2 jacks:
ITEC- Tontechnik und Industrieelektronik GesmbH, A-8200 Lassnitzthal 300 / Austria / Europe
Tel.: +43 (0)3133 / 3780-0, [email protected], www.itec-audio.com
ITEC MICROMIX 4 Automatic Microphone Pre-amplifier
Input Impedance
6 k Ohm
Input Amplification
max 50 dB
Output Levels
Mic or Line (configurable)
