JB Systems USB PARTYSET Operation Manual

safety, please read these operating instructions very carefully before you start using this unit. FEATURES • The USB PARTYSET is our most versatile light set for all your home parties. • This standard set includes 2 RGBW Pars with a very narrow beam angle, 2 RGBW Derby’s, a light stand and 2 transport bags. • Thanks to its unique concept, you can add or replace projectors or effects to compose any setup you like. • Up to 6 effects/projectors can be powered and controlled simultaneously by the bar. • Whatever composition you make, the effects will always work perfectly synchronized • Compatible JB Systems effects: • USB DERBY • USB MUSHROOM • USB LASER • USB PAR • Each projector can also be used without the bar. You can power it via a 5V/2A adapter and a USB-C cable • The fabulous preprogrammed shows with different effect combinations can be controlled in different ways: • DMX-control: via 4, 7, 10 or 34 channels. • Standalone: sound activated (internal microphone) or automatic. • IR-remote: infrared remote control. • Prepared for wireless DMX: just plug-in an optional WTR-DMX DONGLE ! (Briteq® order code: 4645) • Several bars can be connected in master/slave to create wonderful synchronized shows. • 3-digit LED display for easy menu navigation. BEFORE USE • Before you start using this unit, please check if there’s no transportation damage. Should there be any, do not use the device and consult your dealer first. • Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. • Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual. Check the contents: Check that the cardboard box contains the following items: • USB Bar with 4projectors (2x Par + 2x Derby) • Light Stand • 2 transport bags: one for the bar and one for the light stand • IR remote control • Mains cable • Operating instructions

No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. This symbol means: indoor use only. This symbol means: Read instructions. This symbol determines: the minimum distance from lighted objects. The minimum distance between light-output and the illuminated surface must be more than 1 meter. • To protect the environment, please try to recycle the packing material as much as possible. • A new light effect sometimes causes some unwanted smoke and/or smell. This is normal and disappears after some minutes. • To prevent fire or shock hazard, do not expose this appliance to rain or moisture. • To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. • This unit is for indoor use only. • Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object enters the unit, immediately disconnect the mains power. • Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture must be fixed at least 50cm from surrounding walls. • Don’t cover any ventilation openings as this may result in overheating. • Prevent use in dusty environments and clean the unit regularly. • Keep the unit away from children. • Inexperienced persons should not operate this device. • The save ambient temperature is between 15° & 40°C. Don’t use this unit at higher ambient temperatures. • Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. • Always unplug the unit when it is not used for a longer time or before replacing the bulb or start servicing. • The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. • Check that the available voltage is not higher than the one stated on the rear panel of the unit. • The power cord should always be in perfect condition. Switch the unit immediately off when the power cord is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • Never let the power-cord come into contact with other cables! • This fixture must be earthed to in order comply with safety regulations. • Don’t connect the unit to any dimmer pack. • Always use an appropriate and certified safety cable when installing the unit. • In order to prevent electric shock, do not open the cover. Apart from the lamp and mains fuse there are no user serviceable parts inside. • Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type and electrical specifications! • In the event of serious operating problems, stop using the fixture and contact your dealer immediately. • The housing and the lenses must be replaced if they are visibly damaged. • Please use the original packing when the device is to be transported. • Due to safety reasons it is prohibited to make unauthorized modifications to the unit. CAUTION: Do not stare at operating lamp. May be harmful to the eyes. CAUTION

from epilepsy. TRANSPORT: ALWAYS DISCONNECT THE USB CABLES BEFORE YOU PUT THE SET IN THE TRANSPORT BAG AND BEFORE TRANSPORT DESCRIPTION: 1. RGBW DERBY PROJECTOR 2. RGBW PROJECTOR 3. USB C CONNECTOR: connect the USB cables from the bar to each Derby and Par projector. These cables will provide power and data the bar to the projectors. Important: Always disconnect these cables for transport 4. MODE SWITCH: it is possible to use a projector without the bar. All you have to do is to power the unit via an (optional) USB C cable and a (optional) power adapter (5V-2A) or power bank. Once the unit is powered, you can select the working mode via this switch: • CLOSE = OFF • AUTO = Automatic mode • SOUND = Sound controlled mode 5. POLE STAND ADAPTER: used to fix the bar on the supplied light stand 6. SCREW: can be used to fix an additional USB projector to the bar. 7. EXTRA USB CONNECTOR: 2 extra projectors from our USB range can be powered and controlled via these extra USB connectors. (JB Systems USB LASER, USB MUSHROOM, USB DERBY, USB PAR…) 8. CONTROL PANEL: Used to select the different functions of the bar, see further to learn how to operate the unit. 9. DISPLAY: shows all the necessary information about settings and working modes. 10. INTERNAL MICROPHONE: The built-in microphone is used to synchronize the sound controlled shows to the beat of the music. 11. DMX OUTPUT: 3pin female XLR-connector used to connect the USB Bar with the next unit in the DMX chain. 12. DMX INPUT: 3pin male XLR-connector used to connect universal DMX-cables. This input receives instructions from a DMX-controller (in DMX mode) or from the previous bar (in Master/Slave mode). 13. M-DMX INPUT: Please note that this USB-connector is NOT used for updates or to connect the unit to a PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the (optional) WTR-DMX DONGLE from BRITEQ® and you will get wireless DMX! Moreover you will be able to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX function with all connected units! No extra settings to be made in the setup menu, just follow the

WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645) 14. MAINS INPUT: IEC socket with integrated fuse holder and switch, connect the supplied mains cable here. Always replace the fuse with a fuse that is 100% identical. (1.6A – 250V Slow) HOW TO SET UP AND CONTROL THE UNIT Once the effects are installed and connected to the bar via the USB connectors you can operate the unit in several ways: 1) FULL AUTOMATIC STANDALONE MODE: The effect automatically runs a preprogrammed sequence. Select this mode when only 1 USB Partyset is used (standalone) or when the USB Partyset is placed as the first (master) unit in a chain with several USB Partysets. • Press the [MENU] button until the display shows [Aut]. • Press the [ENTER] button to confirm your choice. • Now you can use the UP or DOWN buttons to select the desired effect group: o [AutM] Automatic mixed effects show. ▪ Press [ENTER] to select this mode. ▪ Use the [UP] and [DOWN] buttons to select one of the 3 shows [AM01 – AM03] ▪ Press [ENTER] to confirm your setting ▪ Use the [UP] and [DOWN] buttons to select the desired show speed from [S.01] slow to [S.99] fast ▪ Press [ENTER] to confirm your setting o [AutP] Automatic Program. (Selection of one particular program) ▪ Press [ENTER] to select this mode. ▪ Use the [UP] and [DOWN] buttons to select one of the 18 programs [AP01 – AP18] ▪ Press [ENTER] to confirm your setting ▪ Use the [UP] and [DOWN] buttons to select the desired program speed from [S.01] slow to [S.99] fast ▪ Press [ENTER] to confirm your setting ▪ Use the [UP] and [DOWN] buttons to select the desired motor speed from [M.00] = STOP to [M.99] = fastest (only needed if you use effects with a rotation motor) ▪ Press [ENTER] to confirm your setting You can connect several USB PARTYSETs together: just put the first unit of the chain in one of the automatic effect modes and all other units in “Slave mode” (display shows “SLA”) to make them all work in perfect synchronicity ! 2) SOUND CONTROLLED STANDALONE MODE: The Partyset runs a preprogrammed sequence to the rhythm of the music. Select this mode when only 1 Partyset is used (standalone) or when the Partyset is placed as the first (master) unit in a chain with several units. • Press the [MENU] button until the display shows [Sou]. • Press the [ENTER] button to confirm your choice. • Now you can use the UP or DOWN buttons to select the desired effect group: o [SouM] Sound controlled mixed effects show. ▪ Press [ENTER] to select this mode. ▪ Use the [UP] and [DOWN] buttons to select one of the 3 shows [SM01 – SM03] ▪ Press [ENTER] to confirm your setting ▪ Use the [UP] and [DOWN] buttons to set the desired sensitivity for the microphone from [u.00] microphone OFF to [u.99] high sensitivity ▪ Press [ENTER] to confirm your setting o [SouP] Sound controlled program. (Selection of one particular program) ▪ Press [ENTER] to select this mode. ▪ Use the [UP] and [DOWN] buttons to select one of the 18 shows [SP01 – SP18] ▪ Press [ENTER] to confirm your setting ▪ Use the [UP] and [DOWN] buttons to set the desired sensitivity for the microphone from [u.00] microphone OFF to [u.99] high sensitivity ▪ Press [ENTER] to confirm your setting

You can set a fixed color for all the units together • Press the [MENU] button until the display shows [COL]. • Press the [ENTER] button to confirm your choice. • [COLO] will appear on the screen • Press the [ENTER] button to enter the setup mode. • Use the [UP/DOWN] buttons to set the intensity of the red color. [r.000] = off, [r.255] = maximum intensity • Press the [ENTER] button to confirm your choice and to go to the next color setting. • Use the [UP/DOWN] buttons to set the intensity of the green color. [G.000] = off, [G.255] = maximum intensity • Press the [ENTER] button to confirm your choice and to go to the next color setting. • Use the [UP/DOWN] buttons to set the intensity of the blue color. [b.000] = off, [b.255] = maximum intensity • Press the [ENTER] button to confirm your choice and to go to the next color setting. • Use the [UP/DOWN] buttons to set the intensity of the whitee color. [W.000] = off, [W.255] = maximum intensity • Press the [ENTER] button to confirm your choice and to go to the strobe speed setting. • Use the [UP/DOWN] buttons to select the desired setting for the strobe effect. o [S. 00] = no output o [S. 01] to [S. 99] = slow strobe to fast strobe o [S. 99] = full on and NO strobe effect o [S.100] = Sound controlled strobe • Press the [ENTER] button to confirm your choice. IMPORTANT : if you have set a correct color and the strobe is set to a value between [S. 01] and [S.100], but you have no light output : go back to the (2) SOUND CONTROLLED STANDALONE MODE settings in the menu (see above) and check if the sensitivity of the microphone is not set too low or set to zero [u.00] (microphone OFF). If the microphone is switched off, the bar can of course not react to the sound 😊 4) MASTER/SLAVE STANDALONE MODE: When you have several USB PARTYSET and you want them to all work synchronously, you can work in the so called master/slave mode. To do this, just daisy-chain all the bars and make the settings of the desired automatic or sound controlled program in the first bar of the chain (see description above). This bar is called the Master unit. Now put all the other bars is slave mode. Once this is done, the “slave” bars will follow the orders of the Master unit, so they work in perfect synchronicity. To set a bar in slave mode: • Press the [MENU] button until the display shows [SLA]. • Press the [ENTER] button to enter this mode. • [SLAV] will appear on the display • Press the [ENTER] button to confirm the slave mode.

The USB PARTYSET can be controlled by the IR remote control that is supplied with your USB effect IMPORTANT: check if the remote control option is activated (ON) in the System settings of the bar. If this option is switched off, you can not use the IR remote control. (see last chapter) AUTO MIX press the button to select one of the different mixed automatic shows: AM01, AM02, …. SOUND MIX press the button to select one of the different mixed sound controlled shows: SM01, SM02, ON/OFF press the button to start up the effect bar or to put the bar in standby mode EFFECT PAUSE press the button to pause (freeze) the running effect AUTO P Each time you press this button you will activate another automatic program. AP01, AP02, … SOUND P Each time you press this button you will activate another sound program. SP01, SP02, … PROGRAM SPEED press number 0 to 9 to select the desired speed for the automatic programs (not sound controlled). 0= slowest, 9= fastest The other buttons are not used. 6) CONTROLLED VIA DMX: The USB PARTYSET can be controlled by any standard DMX-controller in 4 different DMX-modes: • 4 CHANNEL MODE: for easy control over the automatic and sound modes • 7 CHANNEL MODE: to control the Color, Strobe, Dimmer and motor rotation manually • 10 CHANNEL MODE: control over the automatic and sound modes + general manual control • 34 CHANNEL MODE: control over the automatic and sound modes + full manual control over each individual projector. • Connect the DMX input of the USB PARTYSET to the DMX output of the previous unit in the chain or directly to the DMX-output of your controller. • Press the [MENU] button until the display shows: “DMX”. • Press the [ENTER] button to enter this option • The actual DMX address is shown on the display. • Press the [ENTER] button again to set the DMX settings

• Use the [UP/DOWN] buttons to select the desired DMX-mode. (4CH, 7CH or 34CH) • Press the [ENTER] button to confirm your choice. • Now you can use the [UP/DOWN] buttons to set the DMX address. [dxxx] • Press the [ENTER] button to confirm your choice. Note: the display blinks when the unit is in DMX-mode and no DMX-signal is detected. Some more information on DMX512: The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to “daisy chain” your DMX controller and all the connected light effects with a good quality XLR M/F balanced cable. To prevent strange behavior of the light effects, due to interferences, you must use a 90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables, this simply won’t work! Each effect in the chain needs to have its proper starting address so it knows which commands from the controller it has to decode. 4 CHANNEL DMX-CONFIGURATION: DMX Channel DMX- value function remarks 1 000-009 Blackout 010-029 AM01 Mixed Automatic Shows 030-059 AM02 060-089 AM03 090-129 AP01 – AP18 Automatic Program 01 – 18 (use Channel 2) 128-159 SM01 Mixed Sound Shows 160-189 SM02 190-209 SM03 210-255 SP01 – SP18 Sound Program 01 - 18 (use Channel 2) 2 000-013 AP01 / SP01 Select select a specific program Channel 1 between 090 and 129 = Auto mode Ch 1 between 210 and 255 = Sound Mode 014-027 AP02 / SP02 028-041 AP03 / SP03 042-055 AP04 / SP04 056-069 AP05 / SP05 070-083 AP06 / SP06 084-097 AP07 / SP07 098-111 AP08 / SP08 112-125 AP09 / SP09 126-139 AP10 / SP10 140-153 AP11 / PS11 154-167 AP12 / SP12 168-181 AP13 / SP13 182-195 AP14 / SP14 196-209 AP15 / SP15 210-223 AP16 / SP16 224-237 AP17 / SP17 238-255 AP18 / SP18 3 000-255 Auto Program Speed Slow to Fast 4 000 Full ON General Dimmer 001-255 Dimmer

DMX Channel DMX- value function remarks 1 000-255 Red 0% → 100% 2 000-255 Green 3 000-255 Blue 4 000-255 White 5 000-255 Dimmer General Dimmer 6 000-015 No Strobe Slow to Fast 016-255 Strobe Speed 7 000 Stop Motor Rotation (slow to fast) 001-127 Clockwise rotation 128 Stop 129-255 Anticlockwise rotation 10 CHANNEL DMX-CONFIGURATION: DMX Channel DMX- value function remarks 1 000-009 Blackout 010-029 AM01 Mixed Automatic Shows 030-059 AM02 060-089 AM03 090-129 AP01 – AP18 Automatic Program 01 – 18 (use Channel 2) 128-159 SM01 Mixed Sound Shows 160-189 SM02 190-209 SM03 210-249 SP01 – SP18 Sound Program 01 - 18 (use Channel 2) 250-255 Manual Mode Channel 5 to 10 are available 2 000-013 AP01 / SP01 Select select a specific program Channel 1 between 090 and 129 = Auto mode Ch 1 between 210 and 255 = Sound Mode 014-027 AP02 / SP02 028-041 AP03 / SP03 042-055 AP04 / SP04 056-069 AP05 / SP05 070-083 AP06 / SP06 084-097 AP07 / SP07 098-111 AP08 / SP08 112-125 AP09 / SP09 126-139 AP10 / SP10 140-153 AP11 / PS11 154-167 AP12 / SP12 168-181 AP13 / SP13 182-195 AP14 / SP14 196-209 AP15 / SP15 210-223 AP16 / SP16 224-237 AP17 / SP17 238-255 AP18 / SP18

Slow to Fast 4 000-255 Dimmer 0% to 100% 5 000-255 Red Dimmer 0% to 100% 6 000-255 Green Dimmer 7 000-255 Blue Dimmer 8 000-255 White Dimmer 9 000-015 No Strobe Slow to Fast 016-255 Strobe Speed 10 000 Stop Motor Rotation (slow to fast) 001-127 Clockwise rotation 128 Stop 129-255 Anticlockwise rotation 34 CHANNEL DMX-CONFIGURATION: DMX Channel DMX- value function remarks 1 000-009 Blackout 010-029 AM01 Mixed Automatic Shows 030-059 AM02 060-089 AM03 090-129 AP01 – AP18 Automatic Program 01 – 18 (use Channel 2) 128-159 SM01 Mixed Sound Shows 160-189 SM02 190-209 SM03 210-255 SP01 – SP18 Sound Program 01 - 18 (use Channel 2) 2 000-013 AP01 / SP01 Select select a specific program Channel 1 between 090 and 129 = Auto mode Ch 1 between 210 and 255 = Sound Mode 014-027 AP02 / SP02 028-041 AP03 / SP03 042-055 AP04 / SP04 056-069 AP05 / SP05 070-083 AP06 / SP06 084-097 AP07 / SP07 098-111 AP08 / SP08 112-125 AP09 / SP09 126-139 AP10 / SP10 140-153 AP11 / PS11 154-167 AP12 / SP12 168-181 AP13 / SP13 182-195 AP14 / SP14 196-209 AP15 / SP15 210-223 AP16 / SP16 224-237 AP17 / SP17 238-255 AP18 / SP18 3 000-255 Auto Program Speed Slow to Fast 4 000-255 Dimmer General Dimmer

5 000-255 Red 0% → 100% 6 000-255 Green 7 000-255 Blue 8 000-255 White 9 000-015 No Strobe Slow to Fast 016-255 Strobe Speed 10 000 Stop Motor Rotation (slow to fast) 001-127 Clockwise rotation 128 Stop 129-255 Anticlockwise rotation Channel for projector / effect 2 11 000-255 Red 0% → 100% 12 000-255 Green 13 000-255 Blue 14 000-255 White 15 000-015 No Strobe Slow to Fast 016-255 Strobe Speed 16 000 Stop Motor Rotation (slow to fast) 001-127 Clockwise rotation 128 Stop 129-255 Anticlockwise rotation Channel for projector / effect 3 17 000-255 Red 0% → 100% 18 000-255 Green 19 000-255 Blue 20 000-255 White 21 000-015 No Strobe Slow to Fast 016-255 Strobe Speed 22 000 Stop Motor Rotation (slow to fast) 001-127 Clockwise rotation 128 Stop 129-255 Anticlockwise rotation Channel for projector / effect 4 23 000-255 Red 0% → 100% 24 000-255 Green 25 000-255 Blue 26 000-255 White 27 000-015 No Strobe Slow to Fast 016-255 Strobe Speed 28 000 Stop Motor Rotation (slow to fast) 001-127 Clockwise rotation 128 Stop 129-255 Anticlockwise rotation Channel for projector / effect 5 (Top)

30 000-255 Green 31 000-255 Blue 32 000-255 White 33 000-015 No Strobe Slow to Fast 016-255 Strobe Speed 34 000 Stop Motor Rotation (slow to fast) 001-127 Clockwise rotation 128 Stop 129-255 Anticlockwise rotation Extra functions in the menu • Press the [MENU] button until the display shows [SYS]. • Press the [ENTER] button if you want to enter this part of the menu with extra options. • Use the [UP/DOWN] buttons to browse the extra functions in this System menu o [LEdS] with this option you can decide if the display should be always on or if it can go off after a while when no new information needs to be shown (only a small dot will stay on) ▪ Press the [ENTER] button to enter the option settings ▪ Use the [UP / DOWN] button to select the desired mode: • [on] = function activated. When no new information needs to be shown on the display, the display will turn off. As soon as new information is available (for example: when you use the remote control to select another mode) the display will turn on automatically to show you this new information. After a while, it will turn off again. • OFF = function deactivated. The LED display will be always lit. ▪ Press the [ENTER] button to confirm your setting o [ ir] gives you the opportunity to activate or deactivate the remote control receiver. ▪ Press the [ENTER] button to enter the option settings ▪ Use the [UP / DOWN] button to select the desired mode: • ON = function activated. The wireless IR remote controller can be used. • OFF = function deactivated. The wireless IR remote controller can NOT be used. ▪ Press the [ENTER] button to confirm your setting o [SouN] When the bar is used in a sound controlled mode, you can decide here how the bar should react when no sound or music is detected. ▪ Press the [ENTER] button to enter the option settings ▪ Use the [UP / DOWN] button to select the desired mode: • [LASt] = when no sound is detected, the effects will continue to execute the last active show • [oFF] = when no sound is detected, the bar will go in Blackout mode. (the light output will be shut down) ▪ Press the [ENTER] button to confirm your setting o [FAiL] gives you the opportunity to decide how the bar should react when DMX is lost or interrupted. ▪ Press the [ENTER] button to enter the option settings ▪ Use the [UP / DOWN] button to select the desired mode: • [hoLd] = The last active setting will be kept till a new signal comes in. • [bLAC] = The bar and effects will go in Blackout mode.(light shut off) ▪ Press the [ENTER] button to confirm your setting o [rESt] can be used to reset all the settings of the bar to the original factory settings ▪ Press the [ENTER] button to enter the option settings ▪ Use the [UP / DOWN] button to select the desired mode: • [YES] = do the factory reset. (firmware version will appear after pressing enter) • [ no] = don’t do the factory reset and return to the menu. ▪ Press the [ENTER] button to confirm your choice

• Switch off the unit, unplug the mains cable and wait until the unit has been cooled down. During inspection the following points should be checked: • All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded. • Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation. • When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced. • The mains cables must be in impeccable condition and should be replaced immediately when even a small problem is detected. • In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be cleaned monthly. • The interior of the device should be cleaned annually using a vacuum cleaner or air-jet. • The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics. • Clean with a soft cloth using normal glass cleaning products. • Always dry the parts carefully. • Clean the external optics at least once every 30 days. • Clean the internal optics at least every 90 days. Attention: We strongly recommend internal cleaning to be carried out by qualified personnel! SPECIFICATIONS This unit is radio-interference suppressed. This product meets the requirements of the current European and national guidelines. Conformity has been established and the relevant statements and documents have been deposited by the manufacturer. This device was designed to produce decorative effect lighting and is used in light show systems. Mains Input: AC 100~240V, 50/60Hz Fuse: 250V 1.6A slow blow (20mm glass) Total Power consumption: 50W Sound Control: Internal microphone DMX connections: 3pin XLR male / female DMX channels: 4, 7, 10 or 34 channels PAR LED power: 2 projectors of 12W each (3W Red, 3W Green, 3W Blue, 3W White) Derby LED power: 2 projectors of 8W each (2W Red, 2W Green, 2W Blue, 2W White) Environment temperature: 10°C to 40°C Size (bar + effects): 720x250x110mm Size stand: max. height = 2.05m, folded = 79 cm Weight: 6 kg (full set with stand) Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www.jb-systems.eu