Kamoer X1 Quick Start Manual

Thank you for choosing the Kamoer X1 Bluetooth dosing pump, Kamoer's latest dosing system that can be controlled by most mobile Bluetooth devices.. For the latest information about this product and the support service information for the product, please visit www.kamoer.com. PACKING LIST 1 Dosing Pump X1, 1 Power Supply, 1 Graduated Cylinder, 1 Power Link Cable, transparent PVC Tubing SPECIFICATIONS Dosing Channel: 1 Dosing Times: 12 times / day -once / 31 days Fluid Volume: .1ml - 6000ml Accuracy: <+/-2% Pump Life: >2000 hour INSTALLATION 1. Attach the dosing pump head to the main unit by lining up the center of the exposed side of the dosing head on to the front of X1 unit and push the head in until it snaps into place. You can install the head with the tubing down, up to the left or right. Just choose the option that better suits your setup. 2. The location of your X1 should be easy to access; it should be close to an electrical power source, close to sump or location where the dosing tubing will be installed and also have easy access to dosing containers that will hold the solutions. The unit should also be installed higher than the sump but not directly above water. 3. Connect the tubing by attaching the included PVC clear tubing to the unions already attached to the doser head and we are ready to configure the X1. The intake is the right most tube and the output to the left when installed facing downwards. OPERATION 1. Play or Apple App Store and make sure that the Bluetooth on our mobile device is set to on. 2. Start the app and click on the upper left- symbol to let the app scan the surrounding area and find your X1 pump. All done! Your X1 device is now connected. 3. Set Nickname Confirm

them to different groups to make things a little more organized. To create or assign an X1 pump to a group, just tap on the three dots to the right of the X1 pump and created group name. This feature is great if you have multiple systems with multiple X1 Pumps. CALIBRATION 1. After connecting to the X1 Pump, the next step in the process is to calibrate it. Tap on the pump Settings -hand Flow Calibration 2. Prime the line and purge out any excess air. If not, the calibration will be off. Once you see all air has been purged from the line and water starts to pour out, tap on Stop. 3. Using the included 10ml beaker, insert Start Adding The pump will run for 10 seconds and then automatically stop. 4. Enter the volume of liquid in the testing beaker and tap on Complete. For increased accuracy, we recommend that you calibrate the X1 pump every 4-6 weeks. DOSING METHODS The X1 has two methods of operation, Manual for single one-time dosing and Planned for a custom 12 stage, 24 hour dosing schedule. MANUAL ADD Manual Add Main center of the circle to enter your volume amount in milliliters. Confirm Start adding you a real-time countdown as the solution is being added. PLANNED ADD Planned Add allows you to create a more intricate schedule of up to 12 different time points in a 24 hour period or to automate a single dosing on a daily basis at the same time each day. To create a new plan, just tap on the pump name you wish to configure Plan A At the top of the screen you will see the container section. This is a really handy section that allows you to approximate how much solution there is left in the container based on your current dosing schedule. In order for this to work correctly, you must enter the volume of your container to the best of your ability. The next section is the cycle. Here you are able to determine if you want to dose on a daily basis or as infrequent as once every 31 days. You can also set the pump to dose on a weekly basis which allows you to then select which days of the week you want to dose.

to the right side. The final and bottom section is your actual schedule. Here you can tell the doser to administer a daily total volume and spread it evenly 12 times in a day. Plus Symbol For an automated single dose regimen that repeats itself da Add Plan Quick Plan ANTICHEMICAL INTERFERENCE The Antichemical interference setting allows you have another plan or pump dosing at the same time, one pump will delay administering the chemical by 5 minutes to ensure that the two chemicals do not mix. Save right hand corner. The main screen will now show your entire dosing regimen and is now set to begin dosing. WARRANTY We warrant your product against any defect in material and workmanship, under normal use. In the event a product is found to be defective within the warranty period of one year, we will, at our option, repair or replace the defective product. The warranty period starts at the day of purchase. For warranty validation, a proof of purchase must be furnished. This limited warranty applies only to the original purchaser and is not transferable from the original consumer purchaser. The followings are excluded from the warranty: 1. Improper use of the device causing malfunction; 2. The device is repaired or modified by an unauthorized person; 3. Uses of non-produced material by our company i.e. pump or tube; 4. Damage by disaster; 5. Improper maintenance causing damage; 6. Use of reagent or sample causing corrosion; 7. Damage by accident or over load; 8. Consumables, such as silicone tube and fuse etc. To obtain warranty support, you may contact our local technical support. Our technical support will attempt to diagnose and correct the problem. If the problem cannot be rectified, our technical support will ask you to return the product. You will be asked to furnish proof of purchase to confirm that the product is still under warranty. Kamoer Fluid Tech (Shanghai) Co., Ltd, reserves the right to improve or alter appearance and technical specifications without notice.