Jabra GO 6470 - DATASHEET 3 How Do

330, IP 331, IP 335, IP 430, IP 450, IP 550, IP 560, IP 650, IP 670 or VVX series so I can answer and end calls electronically? Jabra GO 6470 Requirements: Jabra Pro 9460, Jabra Pro 9465, Jabra Pro 9470, Jabra Go 6470, or Jabra Motion Office with the latest firmware installed Jabra Link 14201-17 Jabra 8800-00-75 (for Polycom IP 320, IP 321, IP 330, or IP 331) Used in combination with one of the following Polycom desk phones: SoundPoint IP phones running: SIP software v 3.0 or later, and BootROM 4.1.0 or later Polycom IP 321, IP 331 running: SIP software v 3.1.2 rev. C or later Polycom IP335 running: SIP software v 3.1.2 rev. B or later VVX series running: SIP software v 3.1.2 rev. B or later, and BootROM 4.1.2 or later To connect your headset with your desk phone, use the following steps: 1. Plug one end of the EHS adapter into the serial port on the back of your phone. 2. Plug the other end into the Jabra base socket marked AUX. 3. Connect the RJ-9 connector of the headset to the Jabra base marked with a phone icon, and connect the other end to the back of the phone marked with a headset icon (use cord Jabra 8800-00-75 for SoundPoint IP phone models 320, 321, 330 or 331). 06/04/2021 03:48 https://www.jabra.no/supportpages/jabra-go-6470/6470-15-207-501/faq/b02403c2-78e3- 4285-87b9-0787e57ad3f3 Side 1 av 9

time: 1. Follow the setup guide displayed on your Jabra base, until you reach the Desk Phone setup. 2. Tap Guided. 3. Tap Yes. 06/04/2021 03:48 https://www.jabra.no/supportpages/jabra-go-6470/6470-15-207-501/faq/b02403c2-78e3- 4285-87b9-0787e57ad3f3 Side 2 av 9

5. Follow the onscreen guide to complete the installation. As part of the installation, you can dial into your local Jabra Setup Server which will configure the audio path. Follow the instructions on the display. 06/04/2021 03:48 https://www.jabra.no/supportpages/jabra-go-6470/6470-15-207-501/faq/b02403c2-78e3- 4285-87b9-0787e57ad3f3 Side 3 av 9

Team. To configure your headset when reconfiguring a desk phone or setting up a desk phone a second time: 1. Tap the tool icon in the top right corner. 2. Tap Phone settings. 06/04/2021 03:48 https://www.jabra.no/supportpages/jabra-go-6470/6470-15-207-501/faq/b02403c2-78e3- 4285-87b9-0787e57ad3f3 Side 4 av 9

4. Tap Setup desk phone. 06/04/2021 03:48 https://www.jabra.no/supportpages/jabra-go-6470/6470-15-207-501/faq/b02403c2-78e3- 4285-87b9-0787e57ad3f3 Side 5 av 9

6. Tap Guided. 06/04/2021 03:48 https://www.jabra.no/supportpages/jabra-go-6470/6470-15-207-501/faq/b02403c2-78e3- 4285-87b9-0787e57ad3f3 Side 6 av 9

8. Tap DHSG. 06/04/2021 03:48 https://www.jabra.no/supportpages/jabra-go-6470/6470-15-207-501/faq/b02403c2-78e3- 4285-87b9-0787e57ad3f3 Side 7 av 9

As part of the installation, you can dial into your local Jabra Setup Server which will configure the audio path. Follow the instructions on the display. If your Jabra Setup Server is unavailable, contact your local Jabra Support Team. Note: All Polycom desk phones that support EHS functionality using the Jabra Link 14201-17 require a change in the setup of the phone. Ensure you make the change when the phone is not being used for an active call. Use the following steps: 1. In the setup menu, navigate to Settings > Basic > Preferences > Headset > Analog Headset (or Hook switch Mode). 2. Change the default setting Regular Mode to the correct Jabra mode by selecting Jabra DHSG or Jabra EHS, depending on the firmware version of the desk phone. 3. Press the Select soft key. 06/04/2021 03:48 https://www.jabra.no/supportpages/jabra-go-6470/6470-15-207-501/faq/b02403c2-78e3- 4285-87b9-0787e57ad3f3 Side 8 av 9

complete and ready for use. However, the Polycom VVX series desk phones will restart, which takes approximately 2 minutes. 06/04/2021 03:48 https://www.jabra.no/supportpages/jabra-go-6470/6470-15-207-501/faq/b02403c2-78e3- 4285-87b9-0787e57ad3f3 Side 9 av 9