International Concepts T-3030T Assembly Instructions

T-330T, T-336T, T-342T OR T-30S, T-36S, T-42S REVISED SEP 24, 2014 Printed in Vietnam - 1 – THIS ITEM IS PACKED IN 2 CARTONS ASSEMBLY INSTRUCTIONS T-3030T, T-3042T, T-3048T, T-3636T, T-4242T/T-330T, T-336T, T-342T T-3030T, T-3042T, T-3048T, T-3636T, T-4242T/T-30S, T-36S, T-42S Description: FIXED TOP TABLE Item no : T-3030T, T-3042T, T-3048T, T-3636T, T-4242T AND T-330T, T-336T, T-342T OR T-30S, T-36S, T-42S “PACKED IN SEPARATE BOX”

T-330T, T-336T, T-342T OR T-30S, T-36S, T-42S REVISED SEP 24, 2014 Printed in Vietnam - 2 – THIS ITEM IS PACKED IN 2 CARTONS BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396. IMPORTANT NOTE: - Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. - Remove all wrapping material, including staples & packing straps before you start to assemble. - DO NOT tighten all screws and bolts until completely assembled. - Keep all hardware parts out of reach of children. WARNING: Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your table. Protect the surface of the table with cloth if you are using any product with rubber feet or base. PART LIST T-3030T, T-3042T, T-3048T, T-3636T, T-4242T When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Qty Sketch A Table top 1 PART LIST T-30S, T-36S, T-42S When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Qty Sketch B Shaker legs 4 OR PART LIST T-330T, T-336T, T-342T When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO DeDescriptionscriti Qty Qty Sketch Sketch B B Sha Turned legs er legs 4 44

T-330T, T-336T, T-342T OR T-30S, T-36S, T-42S REVISED SEP 24, 2014 Printed in Vietnam - 3 – THIS ITEM IS PACKED IN 2 CARTONS RT LIST T-3336T, T-3 HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Description Qty Sketch 1 Hexagon nut (M8x13mm) 8 3 Lock washer (8.5x13mm) 8 2 Flat washer (8.5x19mm) 8 4 Wrench (13mm) 1 NOTE: HARDWARE IS PACKED IN CARTON OF LEGS T-330T, T-336T, T-342T OR T-30S, T-36S, T-42T STEP 1 Attach legs (B) to the top (A) with washers (2), and (3) and nuts (1) as shown below. Tighten with the wrench (4).