Axema A04 Manual 

Codelock A04 A04 is a stand alone codelock designed for in- and outdoor usage Manual Updated 11/20/2020

4 Example- access code 4455 in code slot 1 and five seconds open time. 4 Blocking after invalid code 4 Factory reset 5 Factory settings 5 Technical data and performance 5 2 (5) ManualA04

3-4 Relay output 5-6 Not used 7-8 Timer input Closing of connector 7 and 8 disables CODE 3. 9-10 Exit button Depending on type of lock connected to the A04, the supply voltage may need to be increased. Check voltage at lock if the lock is stoll locked after entering a valid code. Programming 1. Enter programming mode Programming mode l At power up, the unit enters programming mode automatically when the frame is closed. l After a valid access, either by code or exit button, the programming mode can be entered by unlocking, opening and closing of the frame within 45 seconds. l With programming code from rev. 4. In programming mode CODE 1 , CODE 2 , CODE 3 and OPEN TIME flashes under the corresponding function buttons. 2. Enter A090 for normally closed (NC) relay function. Enter A091 for normally open (NO) relay function. 3. Press the corresponding function button of the code to be changed, added or removed. 4. To erase the code, continue at step 6. 3 (5) ManualA04

6. Press the function button for OPEN TIME. 7. Set desired unlocking time 8. Exit programming mode by pressing B or wait for 30 seconds. Enter programming code 1. Enter programming mode 2. Press A20 . 3. Enter a six digit programming code twice. A valid entry is confirmed by a beep. 4. Press B to leave programming mode. The programming code should not contain an access code. Example- access code 4455 in code slot 1 and five seconds open time. 1. Enter programming mode 2. Press the function button for CODE 1. 3. Enter 4455 4. Press the function button for OPEN TIME. 5. Enter 05 6. Press B to leave programming mode. Blocking after invalid code Three invalid codes in a row will block the code lock Unblocking happens automatically after one minute or after two valid code entries in a row. 4 (5) ManualA04

2. Enter A 00199200. Factory settings l 7 seconds unlocking time l No codes l N/O lock relay function Technical data and performance Attribute A04 Power supply 10-40 VDC/8-35 VAC Maximum relay load 1A 30VDC IP-rating IP55 IP rating IK08 Temperature range -30° to +55C° 5 (5) ManualA04