HETRONIC MINI V1 Technical Data Sheet

M M MIIIN N NIII G Geenneerraall ddeessccrriippttiioonn CCoonnttrrooll ffuunnccttiioonnss aanndd aacccceessssoorriieess • Small and handy transmitter for standard applications and customized solutions • Easily operated with one hand • 6 functions maximum, start and stop • Range of application: industrial applications, vehicle technology, agriculture, forestry etc. • Stop button, LED status display, push buttons, easy to wear with its belt clip, carrying bag • Available with internal antenna • Special battery compartment for the use of commercial batteries • Immediately ready for operation � Start button � Stop button � Push button � LED status display � Option: battery charger with HETRONIC battery (Original parts set of HETRONIC) TTTeeeccchhhnnniiicccaaalll D DDaaatttaaa SSShhheeeeeettt � V1 V2 / V3 V4 V5 / V6 � � � �

miitttteerr The transmitter may only be operated by introduced persons! Insert a fully charged battery into the battery compartment of the transmitter. Start the transmitter by using the start button �. Now, the LED status display � is flashing green. After the system check you may start the system by activating the start button �. You can control the designated function by activating the push buttons �. The activated functions are now transmitted to the receiver. The individual functions of the buttons are described in the enclosed drawings! You can stop the system using the stop button � (only use in case of an emergency). LED status display: Flashing green = transmitter activated Flashing red/green = low voltage of the transmitter Flashing red = transmitter stopped Material Polyamid with glass fibre Weight 220 g Dimensions (H1)125 / (H2)225 / B 69 / T 50 mm Diagnostics Status LED RF technology Synthesizer RF output < 10 mW Temperature range -25° up to +70° C Antenna external or internal Frequency range 434/869 Mhz (for EU, further frequencies on request) Safety address 20 bit (1 Mio.) Protection type IP 65 Operating time more than 20 h possible Power supply 3,6 V DC TTTeeeccchhhnnniiicccaaalll D DDaaatttaaa SSShhheeeeeettt ©2011 Hetronic Germany GmbH Version 1.4 hetronic.de Attention: You have to read and understand the operating manual of the radio remote control and the machine before operation is started! Check the proper operation of the stop button before operating the machine. Please check the following items each time before using the system! � Check the transmitter for damages � Check the function of the stop button by means of the LED status display � (transmitter ON: LED is flashing green / stop button pushed: LED is flashing red, transmitter off)