Autoadapt Carolift 40 Operation & User’s Manual

Specifications

Brand:	Autoadapt
Category:	Lifting Systems
Model:	Carolift 40 (Operation & User’s Manual)
File Type:	PDF
File Size:	—
Pages:	6

Download

Download Autoadapt Carolift 40 PDF Manual (6 pages)

Read Online

Read the Autoadapt Carolift 40 Operation & User’s Manual online using the built-in PDF viewer.

Text of the manual

Carolift 40 is a wheelchair hoist with a lift capacity of 40 kg, designed for installation in vehicles.

The hoist has an articulated arm that folds towards both sides. This feature enables the wheelchair to �� narrow rear door openings or behind wide bumpers. The rotating movement is made manually �� use, be easily removed from its base and placed elsewhere. �� EMC Direktive 95/54/EC (Electronic disturbances) Machine Direktiv 2006/42/EC (Risk for injuries, lift capacity, m.m.) ECE regulations R-17 (Crash test) �� procedure has ended and when not in use. 2. SAFETY REGULATIONS The contents of these instructions must be read and understood before the product is taken into use. Keep the instructions easily accessible for further reference. If Carolift is altered, rebuilt or used for other purposes than intended, Autoadapt AB denies any liability. Installation and repair of Carolift must, for safety reasons and for warranty conditions, be made by Autoadapt AB or by a workshop authorized by Autoadapt AB. Make sure the lift belt is not twisted when retracted on the reel.

3. HOW TO USE CAROLIFT 40

Erecting and folding the hoist 2. To fold the hoist press the catch at the base. Grab hold of the hoist arm to prevent it from falling �� It can also be placed leaning on the loaded wheelchair. 1. To erect the hoist just pull it up until it is locked in an upright position. Remove the hoist 1. If the hoist is not needed it can easily be removed by just lifting it out from its holder on the base. 2.�� please refer to ” Erecting and folding the hoist” above.

Loading the wheelchair

1. Erect the hoist and rotate it outwards. Place the wheelchair in a suitable position for hoisting it up. Carolift 40 can pick it up either from the pavement by the side of the vehicle or from behind. The illustration shows a view from above. This is how the hoist is moved to provide the best possible loading. 2. Drive down the lift belt by pressing the toggle switch on top of the lift arm. Hook the wheelchair to the lifting device. Wheelchair Luggage compart- ment 3. Press the toggle switch to lift the wheelchair until it has reached slightly above the vehicle theshold. 4. Rotate the hoist towards the luggage compartment and fold the hoist arm inwards to let the wheelchair pass through the rear door opening. 5. Lower the wheelchair in a suitable position in the vehicle. �� Fold down the hoist on top of the wheelchair according to the instructions ”Erecting and folding the hoist” Toggle switch: Drive down the lift belt Toggle switch: Drive up the lift belt Unloading the wheelchair 1. Erect the hoist and make sure that the lift belt is hooked to the wheelchair. Lift up the wheelchair, by pressing the toggle switch, until it can pass freely over the threshold. 2. Turn the hoist arm outwards and guide the wheel- chair past the rear door opening to a suitable position for lowering. Lower the wheelchair to the ground by pressing the toggle switch. Unhook it. �� to the instructions: ”Erecting and folding the hoist”.

If the lift belt is showing signs of tear and wear it

must be replaced by a new. 4.2 Fuse The hoist has a 10 A fuse that is placed either on the cable by the plug to the electricity socket or on the cable just before the connection to the vehicle battery. 4.3 Lift belt The lift band shall be replaced every four years. 4.4 Cleaning Use a vacuum cleaner with a thin nozzle to clean the hoist base and its cavities. Use a moist towel to clean from dirt etc. Symptom Cause Measure The hoist is not activeted when toggle switch is pressed. 5. TROUBLE SHOOTER 6. TECHNICAL DATA 7. SPARE PARTS a) The lift belt has been jammed and caused the fuse to blow. b) End position is reached. c) The electricity plug is not connected (applies for installations via the compartment socket). d) Vehicle battery is discharged e) A short circuit has caused the fuse to blow. Remove the motor and rewind the lift belt evenly. Replace the fuse. Activate in reversed direction. Plug the cable in the socket. Charge the vehicle battery. Contact the autorized workshop. The hoist is working unusually slow. Vehicle battery is discharged. Charge the vehicle battery. In case of an emergency: Try to start the motor and let the motor run while unloading the wheelchair. Lift cacapcity: Weight (not including the mounting base): Voltage: Power consumption at maximum load: 40 kg 11 kg 12 Volt 5 A The Carolift has a CE-poster where the serial number is stated. Please write down this number! The number is needed when ordering spare parts. Serial No: ____________________

Other Lifting Systems Manuals