FOREDOM MALC30 Assembly

4 1 Elbow, 2 1/4" 5 1 Back Panel 6 1 Right Panel 7 1 Tray 8 1 Bottom Panel 9 1 LED Light 10 1 Front Panel with Shield 11 1 Left Panel 12 1 Cordset, Detachable 13 FFFFOOOORRRREEEEDDDDOOOOM M M M Foredom Electric Company 16 Stony Hill Rd., Bethel, CT 06801 • 203−792−8622 Fax: 203−796−7861 • www.foredom.net } JW 10/2016 Assembly List MALC30 Jumbo Work Chamber with Magnetic LED Light 3 3 1 2 4 5 6 7 9 8 10 11 12 13 Rear Panel Mounting Bracket Rear Panel Mounting Bracket (Not shown)

16 Stony Hill Rd., Bethel, CT 06801 • 203−792−8622 Fax: 203−796−7861 • www.foredom.net } 1. Place the Bottom Panel (Item 9) on a flat surface and attach the bottom section of the Right Panel (Item 7) by threading four M5x6mm Screws (Item 3) through the aligned holes using the No. 2 Phillips Screwdriver. Do not fully tighten the screws until step 5. 2. Repeat Step 1 with the Left Panel (Item 12). 3. Attach the Top Panel (Item 1) to the side panels by threading eight M5x6mm Screws (Item 3) through the aligned holes. The Top Panel is attached to the Left and Right Panels by four screws each. 4. Attach the Back Panel to the four large panels by threading eight total M5x6mm Screws (Item 3) through the aligned holes. The Back Panel is attached to each of the four panels by two screws each. 5. Flush up the five panels and tighten the 24 screws connecting them. 6. Attach the Shield Assembly (Item 11) to the top panel through the Shield Hinge (Item 2). Thread four M5x6mm Screws (Item 3) through the Shield Hinges, two screws for each of the two hinges. 7. Lift up the Shield Assembly (Item 11) to allow for the Tray (Item 8) to be placed on top of the Bottom Panel (Item 9). Also place the magnetic LED Light (Item 10) inside the Shield Assembly where desired. 8. Place the magnetic LED Light Box (Item 4) on the outside of the chamber. Feed the wire from the LED Light (Item 10) through the hole in the top panel and insert the cord into the LED Light Box. Insert the Cordset into the LED Light Box (Item 4). Jumbo Work Chamber Assembly Instructions Tools required: No. 2 Phillips Screwdriver Assembly List MALC30 Jumbo Work Chamber with Magnetic LED Light 9. Insert the Elbow Tube (Item 5) into the Back Panel (Item 6).

−−− 1 1 Top Panel 1.1 1 Bushing 1.2 2 Shield Hinge −−− 2 32 M5x6mm Screw −−− 3 1 Handle −−− 4 2 M5x12mm Screw −−− 5 2 M5 Nut −−− 6 1 Switch Box, LED CP10594 7 1 Cordset, Detachable CP10595 8 1 Elbow, 2 1/4" MA825 9 1 Back Panel −−− 10 1 Right Panel −−− 11 1 Tray −−− 12 1 Bottom Panel −−− 13 1 Arm Rest MA303 14 7 Bottom Pad MA304 15 1 LED Light −−− 16 1 Knob −−− 17.1 1 Centering Pin −−− 17.2 1 Shield MA301 18 11 M4x6mm Screw −−− 19 1 Shield Frame −−− 20 1 Left Panel −−− 21 1 Frame Gasket MA302 22 20 19 18 17.2 17.1 16 15 14 13 3 12 11 9 10 8 7 5 4 3 2 1.1 6 22 21 Parts List MALC30 Jumbo Work Chamber with Magnetic LED Light FFFFOOOORRRREEEEDDDDOOOOM M M M Foredom Electric Company 16 Stony Hill Rd., Bethel, CT 06801 • 203−792−8622 Fax: 203−796−7861 • www.foredom.net } JW 9/2016 See Parts List for MAML10 1.2