Flair Matrix 2226 Assembly Instruction

AVOID CONTACT WITH WATER AND DIRECT SUNLIGHT. TO BE ASSEMBLED ON A SOFT, DRY, CLEAN SMOOTH SURFACE. USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE. ASSEMBLY INSTRUCTION HARDWARE LIST QTY CAUT ION A2 Read instruction carefully. See furniture Parts List and Hardware List for guidance. Be sure you have all the parts before you start assembling. Place and assemble furniture on a clean flat soft surface, such as carpet, rug or carton to prevent being scratched. Matrix Storage Bed with 3 Drawers & Shelves PAGE : 1/5 Before you begin, please read and follow carefully the assembly instruction steps. Please ensure that all surface and edges with colours / laminations are facing forward / outward. Reminder : Screw m3.5 x 14mm 84 A7 Screw m4 x 30mm 23 A10 Screw m4 x 38mm 12 A17 Crosshead Screw m6.3 x 40mm 36 D3 D4 D6 Wood Dowel 5 x 20mm Wood Dowel 6 x 25mm Wood Dowel 8 x 25mm 10 18 20 F2 Mini Fix 15mm 12 Sets H6 Handle 128mm (Silver) 3 L1 Leg Pin 8 L2 Plastic Leg L Shape 4 M6 Drawer Metal Slide 400mm N1 Allen Key R2 Single Plastic Cap 28 Y Crosshead Cover Mini Fix Cover 32 3 Sets 1 N2 Nail 8 R1 L Bracket 1 13 13 13 13 13 8 9 15 10 2 6 4 17 16 18 3 3 7 5 19 20 21 26 24

STEP 1 Assemble all hardware below at panel no. 16, 17, 18,19, 20 & 24. STEP 2 Assemble the 3 set of drawers as shown below. Assemble the 3 set of drawers as shown below . STEP 3 STEP 4 Slide the bottom panel no. 26 along the groove until end. Assemble the 3 set of drawers head panel using Mini Fix 15mm (F2). MODEL : 2226 3 pcs 3 pcs 3 pcs Roller 16 17 18 20 19 24 F2 F2 F2 H6 A7 A7 H6 D4 D4 D4 D4 20 19 21 24 A10 A10 16 17 18 26 F2 F2 26 A2 A2 A2 A2 A2 A2 R2 R2 R2 R2 R2 R2 M6 A2 R2 A2 M6 M6 F2 1st 3rd Lock 2nd Insert Right position F2

STEP 5 STEP 6 STEP 7 STEP 8 Slide the panel no.25 until end groove then attach the top panel no.4 and secure by Mini Fix 15mm (F2) at panel no.1 & 2. Button the Mini Fix 15mm (F2) with Mini Fix Cover (Y). Use Screw m3.5 x 14mm (A2) to assemble the Single Plastic Cap (R2) to secure the panel no.25. Nail the Leg Pin (L1) at bottom panel no.1 & 2. Use Screw m3.5 x 12mm (A2) to secure the L Bracket (R1) between panel no. 5 & 6. Attach the back panel no.25 to panel no.3 using Nail (N2). Use Allen Key (N1) to tighten the Crosshead Screw m6.3 x 40mm (A17). MODEL : 2226 Insert the Wood Dowel 8 x 25mm (D6) at panel no.3. Use Allen Key to tighten the Crosshead Screw m6.3 x 40mm (A17) & button the screw head with Crosshead Cover (Y). N1 A17 A17 A17 A17 A17 N1 A17 A17 A17 A17 Y Y Y Y D6 D6 3 3 5 1 2 6 2nd Insert Right Position 3rd Lock 1st F2 F2 F2 25 Y Y Y 1 2 6 4 Stand up A2 R2 R2 R2 R2 R2 R2 R2 L1 L1 L1 1 2 Lift down A2 A2 R1 6 5 25 3 3 R1 N2 N2 N1 A17 A17 Y F2 Y F2 F2 N2 Hit Softly Hit Softly

STEP 9 STEP 10 STEP 11 STEP 12 Use Allen Key (N1) to tighten the Crosshead Screw m6.3 x 40mm (A17) & button the screw head with Crosshead Cover (Y) except for the Crosshead Screw (A17) at panel no.10. Insert the Wood Dowel 8 x 25mm (D6) at both side of panel no.9 & 11. Use Screw m4 x 30mm (A7) and Wood Dowel 5 x 20mm (D3) to assemble the 2 pcs of panel no.22 to panel no.9 & 3pcs of panel no.23 to panel no.11. Use Screw m3.5 x 14mm (A2) to assemble the Drawer Metal Slide 400mm (M6) at the marked holes on panel no. 7 , 8 & the both side on panel no.14. MODEL : 2226 Use Allen Key (N1) to tighten the Crosshead Screw m6.3 x 40mm (A17) & button the screw head with Crosshead Cover (Y). A7 D3 D6 D6 D6 D6 D6 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 D3 D3 D3 D3 D3 D3 D3 22 22 9 23 23 23 11 D6 D6 D6 D6 D6 D6 D6 D6 M6 M6 M6 A2 M6 A2 A2 M6 Attach (M6) at both side of panel no.14 14 14 8 7 A17 Y A17 A17 A17 A17 Y A17 Y A17 Y 9 10 11 12 14 14 15 A17 N1 Y A17 N1 A17 N1 A17 N1 A17 Y A17 Y A17 Y 8 7 N1 A17 Y A17 Y A17 Y

STEP 13 STEP 14 STEP 15 Insert the 3 sets of drawers (left, middle & right drawer). Finally, attach COMPLETE the headboard behind the bed. The drawers position is optional. It's either facing the left or right side. Put the 5 pcs of bed base no.13 on top of the bed. Screw the Plastic Leg L Shape (L2) at panel no.9, 12 & between the 2 side panels. Nail the Leg Pin (L1) at bottom panel no.9 & 12. MODEL : 2226 13 13 13 13 13 8 A2 A2 L2 L2 L2 L2 L2 L1 L1 L1 L1 Lift up Rotate Optional - Left / Right side. Lift down Insert the drawers. 16 17 18 6 2 4 4 2 6 3 3 13 13 13 13 13 8 8 8 16 17 18 11 12 7 11 12 9 1 5 9