Anritsu MP1800A Operation Manual

following remote commands if the MU181500B Jitter Module is not installed in Slot 5 and 6. Remote Commands Explanation of Commands :UENT:ID 1;:MOD:ID 3 :SYST:INP:CSEL INT Wait 1000 ms. *2 Sets the remote command destination to PPG. Links the PPG and Synthesizer. Link setting requires about one second. ...

Previous function omitted =,,[,],,, x indicates a USB number. The USB number is 1 to 127. = XXXXXXXXX (FIX9) Refer to Table 7.2.1-2 “Option Character Correspondence Table”. Note: NONE is output if no module is installed. = XXXXXXXXXX (FIX10) 0000000000 to 9999999999 Serial number Note: “-------------” is output i ...

E-2 E.1 System Configuration The system configuration for the sequence examples consists of the MP1800A with the following devices installed. The values of "X" in "MOD:ID X" and ":USB:ID X" should be altered if the device installation locations are changed. Table E.1-1 System configuration for sequence examples Unit Module Module Name Remarks UENT (MP1800A) MOD1 MU181000A Synthesizer MOD2 MOD3 MU183020A PPG MOD4 MU183040B ED MOD5 MU181500B Jitter Module The setting procedure, such as for initialization, will differ if the MU181500B is not installed. MOD6 USB7 - M ...

1-4 1.2.2 Options Table 1.2.2-1 shows the options for the MP1861A. All options are sold separately. Table 1.2.2-1 Options for MP1861A Model name Product name Remarks MP1861A-x01 64 Gbit/s Extension MP1861A-x11 Variable Data Output (0.5 to 2.5 Vp-p) Mandatory option Cannot be installed together with MP1861A-x13. MP1861A-x13 Variable Data Output (0.5 to 3.5 Vp-p) Mandatory options Cannot be installed together with MP1861A-x11. MP1861A-x30 Variable Data Delay Option name format is as follows: Indicates function. This value is recognized by the mainframe. Anritsu management nu ...

This chapter describes the maintenance of the MP1861A. 8.1 Daily Maintenance ........................................................ 8-2 8.2 Cautions on Storage ..................................................... 8-2 8.3 Transportation ............................................................... 8-3 8.4 Calibration ..................................................................... 8-3 8.5 Disposal ........................................................................ 8-4 ...

2-11 2 Before Use (3) For Windows XP, when the screen shown in Figure 2.2.1-2 is displayed, click Continue Anyway to continue. Figure 2.2.1-2 Confirmation Dialog of USB Driver Installation (2) Note: The screen as shown in Figure 2.2.1-1 may not be displayed on the front page. If software installations take a long time, check that the screen as shown in Figure 2.2.1-1 is hidden at the back of the other screen. (4) The following window is displayed when the installation completes normally. Click Finish to end the installation procedure. Figure 2.2.1-3 Complet ...

7-12 Function Queries the mainframe information including model and serial number. Example To query the mainframe information including model and serial number for USB1: > :SYSTem:UNIT? 1,7 < "MP1861A,6201234568,1.00.00,1.00.00,OPT301,1.00.00,1.00.00" UNT? [,] Parameter = 1 to 4 Mainframe number "1" for the MP1800A, "1 to 4" for the MT1810A when querying USB. = 1 to 127 Mainframe number Response , =,,,,,, , < ...