DSE DM-WFC2 Installation Manual

Page:1 DSE SRL - ITALY - WWW.DSE.EU WiFi remote controls DM-WFC2 DM-WFC3 DM-WFL1 Installation manual How to install the DM Series wifi remote control

Page:2 DSE SRL - ITALY - WWW.DSE.EU What did you buy These wifi remote controls are devices that can add the remote control via the Internet via WiFi to any electrical device. You can connect these remotes to your WiFi network and then operate them at your leisure with the included app, both in local wifi connection and through the Internet, when you are not at home. This manual explains how to install and configure the devices.

Page:3 DSE SRL - ITALY - WWW.DSE.EU Electrical connection DM-WFC2 DM-WFC2 is a switch with stable ON / OFF switching, remote controlled via wifi. You can use it to supply power to any 220V up to 10A electrical appliance, such as lighting, acoustic indicators, irrigation, etc. It also has a switch input to be able to operate parallel to a traditional local control. In this way you can operate the device indifferently via the app with wifi or with the local switch. CONNECTION WITHOUT LOCAL SWITCH LN = Connect the 110-250V AC power supply Loutput-Noutput = Connect the AC power supply of the device to be controlled CONNECTION WITH LOCAL SWITCH LN = Connect the 110-250V AC power supply Loutput-Noutput = Connect the AC power supply of the device to be controlled. This output supplies the output voltage. S1-S2 = Connect the local switch You can install the module in a junction box or directly in the switch box 503 as in this example. If you use a very small box you can remove the side flaps with the fixing holes using pliers.

Page:4 DSE SRL - ITALY - WWW.DSE.EU USE OF LOCAL CONTROL You will learn to use the wifi command shortly in the app explanations. As for the local switch, remember that each time the switch is activated, both during opening and closing, the state of the ON / OFF relay will change. So the switch on-off position will not always be the same. This is normal, because you have to consider that the user can turn on the device with the wifi app and then turn it off with the local switch, and vice versa.

Page:5 DSE SRL - ITALY - WWW.DSE.EU Electrical connection DM-WFC3 DM-WFC3 is a remote control for electric locks, gate openers or garage doors. It provides an impulsive contact that activates the device and also a status contact that you can optionally connect to signal to the remote control if the door is open or closed. You can use this remote control for all devices that require an impulsive command instead of an ON / OFF switch. LN = Connect the 110-250V AC power supply S1-S2 = Connects the electric lock or gate opener command (NO contact closes for 2 seconds with each command) S3-S4 = Connect a contact that closes when the door is closed Terminals S1-S2 provide a 3 second pulse each time a remote command is performed. If you have other local buttons to control the door or gate, you can connect them in parallel on the same control terminals. If your drive (electric lock, garage door etc.) has a contact that closes when the door is closed you can connect this contact to the S3-S4 inputs, so our app will be able to tell you for sure if the door is open or closed. The two terminals separated from the main terminal block are not used.

Page:6 DSE SRL - ITALY - WWW.DSE.EU Electrical connection DM-WFL1 DM-WFL1 is an E27 lamp holder that can be controlled via WiFi. You can simply screw it between the original lamp holder and the bulb. It is ideal for outdoor lighting on poles.

Page:7 DSE SRL - ITALY - WWW.DSE.EU Placement When choosing the installation location of the product, pay attention to these precautions CHECK THE WIFI COVERAGE Before placing the remote control in its final position, remember that this device must connect to your wifi network in order to function. You should therefore check with your mobile phone that at the point where you want to put it there is a good coverage of your wifi network. If you see that the signal is very poor you should intervene on your wifi network, perhaps enhancing it with a repeater. Do not install the product in an area with poor wifi signal because then it would be unreliable in its operation. NO METAL CONTAINERS Be careful not to close the remote control card in a metal container because this would shield the wifi signal. On the other hand, you can close the plastic cover of the junction box without any problems because it does not provide an important shield.

Page:8 DSE SRL - ITALY - WWW.DSE.EU Download the Smart Life app In order to use the product with your mobile phone, you must first connect the device to your wifi network. To do this you need the Smart Life APP which you can download for free from Google Play or Apple Store. It is a very popular app in home automation. WiFi connection The first time you start, you must create an account by entering a valid email address. Press CREATE A NEW ACCOUNT and then wait for the code via email to confirm the registration. If you do not have an email address, you can also use your phone number by pressing Use Phone Number and get the verification code via sms Once the account is created, you have your own space in the cloud where you can also upload many WiFi remote controls to control different devices.

Page:9 DSE SRL - ITALY - WWW.DSE.EU Configure the remote control In order to use the remote control with your mobile phone, you must first connect the device to your wifi network. It is an easy operation to perform, thanks to the APP you just downloaded. Note that on the electronic board there are: 1 button called PAIRING 1 red LED that can be seen transparently through the plastic Locate them because you will need them in these operations 1 - Press ADD DEVICE 2 - Choose the type of device according to the following table DM-WFC2 = SWITCH (WIFI) - Do not use the Zigbee version DM-WFC3 = DOOR OPENER or SMART GARAGE DOOR OPENER DM-WFL1 = SWITCH (WIFI) - Do not use the Zigbee version

Page:10 DSE SRL - ITALY - WWW.DSE.EU 3 - Now power your device and check the red LED that is seen transparently through the external plastic, on a new piece it should be flashing. If it does not flash, press the PAIRING button on the device for 5 seconds, until the red LED starts to flash. When the LED flashes, press the blue app button to confirm

Page:11 DSE SRL - ITALY - WWW.DSE.EU 4 - Now you have to choose your wifi network to connect to and enter the access password. If you have networks at different frequencies remember that the device only supports 2.6 GHz WiFi networks. Press CONFIRM to start connecting the device to your wifi network. The connection takes about 30 seconds during which the app connects the remote control to your wifi network and registers it in your account on the cloud in order to access via the Internet.

Page:13 DSE SRL - ITALY - WWW.DSE.EU Use the remote control Now that you have configured your device you can control it with the app. Thanks to the P2P cloud server you can also control it through the Internet. The icons and options you see in this section may vary slightly depending on the type of remote you purchased. ON / OFF- The remote control is simply controlled with a button. The button icon varies according to the status of the remote control so you can understand if the command is on or off. LEFT TIME or COUNTDOWN- Here you can set a timer so that the remote control changes state (for example if it is active, it switches off) after a certain time. You can set the timer for a few seconds, but also up to 24 hours. SCHEDULE- Here you can program automatic switching (ON or OFF) at a certain time on the different days of the week. You can enter several automatic programs that repeat only once, or every day of the week, for example every Monday. With this programmer you can make real programmed automations. You can also set up a notification to notify you of the scheduled operation.

Page:14 DSE SRL - ITALY - WWW.DSE.EU RECORD - Here you can see the history of your activations ALARM - Some remote controls that have a status detection allow you to receive notifications on the phone whether the status is open or closed.

Page:15 DSE SRL - ITALY - WWW.DSE.EU Advanced options From the device command page you can access some advanced options by pressing the edit icon (pencil) at the top right VOICE COMMAND You can connect your remote control with other voice command devices. The remote control is compatible with the most common voice control devices such as Amazon Echo (ALEXA) and Google Assistant. So you can also control the relay by giving voice commands. OFFLINE NOTIFICATION You can enable this function to receive a notification when the device is unreachable for 30 minutes due, for example, to a problem with your Internet line or due to a power failure.