Compel Pivit Installation Manual
Text of the manual
Pivit Installation Guide
This guide is based on an L Shape, Open Frame Leg desk.
What You Received:
-Worksurfaces
-30”/36”/24” Legs
-Hat Channels
-Wood Screws
-Mending Plates
Tools You’ll Need:
-Drill with Phillips head bit
-Tape measure
Pivit Installation Guide
1. Lay your worksurfaces out and place the 30”/36” legs on both
ends. The outside corners of the surface should be flush with
the outside corner of the leg.
2. Attach work surface support bar 1/3rd of the way from the
front of the worksurface. Expand outside portion of each side
of the hat channel to fit in the gap between surface and leg.
Tighten down center bolts.
Pivit Installation Guide
3. Attached Mending plates to surface where you want the re-
turn to lay.
5. Flip return rightside up and rest free end of return against
mending plates. Align with outside corner and attached top to
open side of mending plates.
4. Attach Open frame leg to end of the return
