CMS Freedom FR001 Instruction Manual

concerning your personal safety. CAUTION This symbol indicates information on how to avoid damaging the unit. IMPORTANT This symbol indicats tips and information about seting up FR002 (Charging Base). CAUTION / WARNING - Read all instructions before using the product. - To reduce risk of injury, close supervision is necessary when the product is used near children. - Use of an attachment not recommended or sold by power bank manufacture may result in a risk of fire, electric shock, or injury to persons. - To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting power pack. - Do not operate the unit with a damaged cord or plug, or a damaged output cabled. - Do not use if the unit has been damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or rick of injury. - Do not disassemble the power bank, take it to a qualified service person when a service or repair is required. Incorrect assembly may result in a risk of fire or electric shock. - Do not exposed to water. - This unit may become hot when recharging, handle with care. - Do not leave in hot conditions 60C or above e.g., left sitting in hot car. - Do not operate unit outside of specified conditions. - This unit contains Li-ion 18650 or equivalent cells. - Do not expose to heat or throw in fire. - Do not attempt to modify. - Be careful when unpackaging the unit. Do not use sharp objects when removing the packaging as this may cause scratches to the unit. SAVE THESE INSTRUCTIONS

Setting up & Recharging …………….….….4 Using the power bank ………………....…...5 User Maintenance Instructions .……….…..5 Moving and Storage Instructions .….….…..5 Trouble Shooting………………………….…6 Specification FR001 Model: FR001 Battery cells: Li-ion 18650 Battery Capacity: 18900mAh Input (Power in contacts): DC 20V/1.5A (max) Type-C output: DC 5V/3A, 9V/3A, 15V/3A, 20V/3A (PD3.0 60W) Type-A output: DC 5V/3A, 9V/2A, 12V/1.5A (QC3.0 18W) Total output: 78W (Both ports combined) Dimensions: 136mm diameter x 33mm tall Weight: 0.46KG Operation Temperature: 5~35C Packaging Content: 1 x FR001 Specification FR002 Model: FR002 Power Input: 20V/7.5A Power output: 19.5V/7.5A Dimensions: 145mm diameter x 21.5mm tall Weight: 0.34KG Packaging content: 1 x FR002, 1 x AC Power Cord, 1 x Power Supply (20V/7.5A) Product Overview – FR001 Reset button location USB C Port USB A Port Power Button LED Charge level indicator Power Contact Rings

Power Out Contact Rings Power Indicator D.C. Jack – Power In Setting Up FR002 1. Plug the AC cord into the power supply. 2. Plug the AC plug into an outlet. 3. Plug the power out lead from the power supply into the DC jack on at the back of FR002. Power indicator will illuminate green. Setting Up & Recharging FR001 IMPORTANT Setting up To recharge the power bank, place it onto the dedicated charging base (FR002). The power bank will be recharged via the contact pins on the base of each unit. Multiple power banks can be stacked on top of one another when recharging. The dedicated charge base (FR002) can support 5 units with recharge times around 3 hours, or 5 plus units at extended recharge times. * A white LED will flash to indicate the power bank is recharging. As the unit charges the additional LED(s) will remain on until all four LEDs are on constantly. Power Supply Power Supply

FR001 can recharge any USB C or USB A compatible device(s). Simply plug in the device and press the power button on freedom to turn it on. Four white LED’s will illuminate. As FR001 discharges your device each LED will go out systematically until the unit is depleted. User Maintenance Instructions Important – Cleaning When cleaning FR001 do not spray cleaner directly onto unit. Spray onto cloth and wipe down the unit. Only spray enough cleaner that the cloth is just damp to the touch. When cleaning FR002 disconnect from mains power before wiping down. Do not spray cleaner directly onto unit. Spray onto cloth and wipe down the unit. Only spray enough cleaner that the cloth is just damp to the touch. Moving & Storage Instructions Important - Long Term Storage When storing FR001 for extended periods of time you MUST discharge and recharge the unit at least every 6 months to maintain the integrity of the batteries.

simultaneous The over-current protection is activated during discharging. Remove the over-loading device The over-temperature protection is activated during charging. The Unit stopped charging as the device operating temperature has been exceeded. The power bank can't be charged. The firmware is shutdown. press the reset button. Contact pins are not making good contact with the charging plates. Check that no debris is impeding recharging via the contact rings/pins and try again your plugged-in device(s) are not charging. There is no capacity left. Re-charge the power bank. The firmware is shutdown. Press the reset button. The power bank isn't turned on. Press the power button The connection cable is not good. Make sure the cable is in good condition and undamaged. You may need to try with another cable. Unit run time is low The capacity left is low Re-charge the power bank. The working current of devices is larger. Battery degradation over time/usage The battery life is close to end after use around 300 times. Battery degradation over time/usage