Audio Technica BAL-M40x Quick Start Manual

Thank you and congratulations on your purchase of the BAL-M40x Bluetooth Adapter and Amplifier for Audio-Technica® ATH-M40x headphones. Welcome to a new world of mobility and sonic clarity! • Using the included USB cable, charge fully. Power LED will turn orange when charging, and go dark when fully charged. • Slowly and firmly press the unit into the headphones (you will feel a “click” when it's in place). • Turn the power switch to the ON position. • Unit will default to Pairing Mode. Search for pairing name BAL-M40X on your device and pair. • Press the + button several times until you hear two beeps indicating maximum volume. • Turn volume down on your Bluetooth device. Press play and set approximate volume. Use Vol OVER

• Enjoy! Playback Play/pause: btn Next Track: Hold + for 1 sec Vol up: + btn Prev Track: Hold - for 1 sec Vol down: - btn Note: Volume buttons control ONLY the internal amplifier. Phone Answer call/hang up: Center button Sleep mode If the unit is idle for 5 minutes, it will enter sleep mode, with reduced power consumption. Press any button to wake. Specifications Frequency response 20Hz-20KHz THD <0.1% SNR 85 dB Bluetooth version 4.1 Charging Port Type USB Micro B Battery type Lithium-ion rechargeable Battery capacity 130 mAh Weight 21 g (<1 oz) Microphone type Noise-cancelling