ALDI Workzone PGG72H Operation & User’s Manual

Read all safety warnings and all instructions thoroughly before operating this product. Ensure you keep your manual in a safe place for future reference. 10282 15W GLUE GUN Product Info https://help.tools/

quicky and easily Whether you require product information, spare parts or accessories, details on warranties or aftersales service, or if you want to watch a product demonstration video, our QR codes will take you there in no time at all. What is a QR code? A QR-code (QR=Quick Response) is a type of matrix that can be read with a smartphone camera and that contains a link to a website or contact details, for example. Advantage: You are not required to manually enter a website address or contact details. How it works To scan the QR code, all you need is a smartphone with QR codes reader software and an Internet connection*. This type of software can be downloaded for free from your smartphone’s app store. Try it out now Just scan the QR code with your smartphone and find out more about the Aldi product you have purchased*. * Depending on your tariff you may be charged for the connection. Product Info

Description of symbols…………………………………………............. 05 General safety warnings…………………………………………........... 06 Component list……………………..………………………………............08 Assembly……………………………..………………………………............09 Operation…………………………….……………………………………......09 Maintenance……………………….………………………………….......... 11 Warranty……………………….……………………………………….......... 12 Environmental protection……….…….…….…………………............ 13 FAQ/Troubleshooting……………….…….…….…………………........... 13 Technical Specifications................................................................. 14

Application First time users or inexperienced operators pay particular attention to the operation of the 15W Glue Gun, including details of starting and stopping and correct use of the 15W Glue Gun on pages 9-11, as well as the maintenance instructions on pages 11. Intended use of 15W Glue Gun NOTE: This product is for private domestic DIY use only. It is not suitable for commercial or trade use. This 15W Glue Gun is used for the quick gluing of clean, dry and grease-free materials with glue heated to its melting point. The glue gun is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. Contents of carton 1 x 15W Glue Gun 12 x 100mm glue stick 1 x Stand / rest 1 x Instruction manual 1 x Warranty Card • Remove all packing materials • Ensure all parts on the contents list are present • Check the appliance, and all accessories for transportation damages

Wear ear protection Wear eye protection Wear breathing protection Conforms to relevant standards for electrical safety and electromagnetic compatibility. Double insulation 36 Month Warranty Period. The rating plate on your Glue Gun may show symbols. These represent important information about the product or instructions on its use. 36 Description of symbols

General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Additional safety warnings for your glue gun 1. Before connecting the unit to the mains - ensure the unit is switched OFF because it will achieve maximum heat in a little time. 2. Always wear protective gloves and eyewear because it can reach 83°C(+/-2%) Centigrade 3. Always place the appliance on its stand after use and allow it to cool down before storage and never touch the heat deflector. 4. Never attempt to use the appliance to dry animals, clothing or hair. 5. Never use this appliance as a hair dryer. 6. Be aware that heat may be conducted to combustible materials that are out of sight.

7. Be careful When using this appliance in places where there are combustible materials or gases, extreme caution must be taken to prevent fire or explosion. 8. Do not apply to the same place for a long time. 9. Do not use in presence of an explosive atmosphere. Always use it in ventilated areas. 10. Do not leave the heat gun unattended when it is switched on. 11. The appliance is not to be stored or left outdoors 12. This product is designed for light domestic use only, it is not designed for commercial, industrial or trade purposes.

(toll free) MODEL No.: PGG72H • 07/2019 10282 e-mail: [email protected] AUS 8 1300 889 028 AUS 1. Nozzle with heat guard 2. Glue stick 3. Handle 4. Power cord 5. Flow control trigger 6. Support Stand / rest 7. 12 x Glue sticks 8. Glue stick entry Component list 8 7

(toll free) MODEL No.: PGG72H • 07/2019 10282 e-mail: [email protected] AUS 9 1300 889 028 AUS WARNING! Please read and understand this instruction manual before use and keep it for your future reference. Your glue gun should only be passed on together with this instruction manual. Assembly Installing a glue stick (see fig. A) WARNING. Disconnect the glue gun from the mains power supply before making any adjustments or undertaking maintenance procedures. 1. Insert the provided glue stick (2) into the glue stick entry (8). 2. Squeeze the flow control trigger (5) multiple times to allow the glue stick (2) to be pushed down. A Operation 1. Switching on/off (see fig. B) To put into operation 1) Insert the power plug into the mains power supply, and turn the power switch on. 2) Place the gun on the support stand / rest (6). Allow the gun to heat up for approximately 3 min before beginning work.

(toll free) MODEL No.: PGG72H • 07/2019 10282 e-mail: [email protected] AUS 10 1300 889 028 AUS To switch off, turn off the mains power switch and pull the mains plug out. WARNING: Allow the unit to cool completely before storing. The hot nozzle can cause damage. NOTE: As the result of heat storage, the glue gun can also be used after it has heated up without being connected to the mains. If the glue that emerges becomes thick, insert the plug into the mains power supply again. Warning: Disconnect the glue gun from the mains power supply when not in use. 2. Gluing Preparations for Gluing The surfaces to be glued must be clean, dry and free of grease. A smoother surface is also more ideal for gluing. WARNING: Do not use inflammable solvents for cleaning! The ambient temperature and the work piece to be glued must not be cooler than +5 °C or warmer than +50 °C. Warm rapidly cooling materials (e.g. steel) for better adhesion. Gluing 1) Press the flow control trigger (5). 2) Apply the glue in dots around the edges of the workpiece surface. For gluing flexible materials (e.g. textiles), apply the glue in a zig-zag line. B

(toll free) MODEL No.: PGG72H • 07/2019 10282 e-mail: [email protected] AUS 11 1300 889 028 AUS Danger of burning! The glue and the nozzle tip are heated to 200 °C. Do not allow the hot glue to come into contact with persons or animals. If hot glue touches the skin, immediately hold the spot for several minutes under a stream of cold water. Do not try to remove the glue from the skin. 3) After applying the glue, press the surfaces to be glued together immediately for a stronger bond. 4) Press the glued surfaces together for approximately 30 seconds. To assist with adhesion, apply a weighted load or clamp to the glued junction for approximately 5 minutes. 5) Between individual gluing actions, place the gun on the support stand / rest (6) . 6) Remove glue residue after cooling with a sharp knife. The glued junction can be separated again by heating. The glued junction can be painted. WARNING: Do not place the heated glue gun on the support stand or have the nozzle pointed downwards for a long period of time when using! The glue will continue to slowly flow from the nozzle! WARNING: The glue gun should be switched off and allowed to cool down after 12 hours continuous use. Maintenance WARNING: Disconnect the glue gun from the mains power supply before making any adjustments or undertaking maintenance procedures. Keep the glue stick clean to prevent impurities from clogging the nozzle. After the glue stick is inserted, do not pull it out from the gun. After heated, if the glue gun is not used for more than 15 minutes, turn off the power switch and disconnect from the mains power supply. Avoid using the glue gun in a humid environment, which may result in electric shock.

(toll free) MODEL No.: PGG72H • 07/2019 10282 e-mail: [email protected] AUS 12 1300 889 028 AUS Do not disassemble the glue gun by yourself. Never use water or chemical cleaners to clean your glue gun. Wipe it with a dry clean cloth. Always store your glue gun in a dry place. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Storage Store in a secure, dry place out of the reach of children. Do not place other objects on the product. Warranty Your new WORKZONE® Glue Gun will more than satisfy your expectations. It has been manufactured under stringent WORKZONE® Quality Standards to meet superior performance criteria. You will find your new Glue Gun easy and safe to operate, and, with proper care, it will give you many years of dependable service. CAUTION. Carefully read through this entire instruction manual before using your new WORKZONE® Glue Gun. Take special care to heed the Cautions and Warnings. Your WORKZONE® Glue Gun has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this Glue Gun, making it easy to maintain and operate. Use only WORKZONE® replacement parts for your product. Non- conforming parts or modifications made to parts will void your warranty. What your 3 year warranty means Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of as quickly as possible once it has been brought to our attention. In the

(toll free) MODEL No.: PGG72H • 07/2019 10282 e-mail: [email protected] AUS 13 1300 889 028 AUS unlikely event of such an occurrence, or if you require any information about the product please contact us via our after sales support services, details of which can be found in this manual and on the product itself. After Sales Support TEL: 1300 889 028 Service Support If you have any issues with the operation of your product, please call our Customer Service on 1300 889 028 for advice, or email us at [email protected] Environmental protection Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way. FAQ/Troubleshooting Fault Cause Remedy 1. After power on for 5 min, the glue gun stays cool. 1.1 Damaged power switch / socket. 1.2 The heater is broken. 1.1 Change to another switch / socket. 1.2 Contact customer service. 2. The glue gun is not dispensing glue normally during use. 2.1 Check to see if the glue gun is cool. 2.2 The nozzle is blocked. 2.1 Follow the Remedy 1.1 and 1.2. 2.2 Contact customer service. For further inquiries or issues associated with your glue gun, call our Customer Service on 1300 889 028 or email us at [email protected]

(toll free) MODEL No.: PGG72H • 07/2019 10282 e-mail: [email protected] AUS 14 1300 889 028 AUS Technical Specifications Rated Voltage 220-240V ~ 50Hz Rated power input 15 W Melting point 83°C(+/-2%) Glue stick size 10.8- 11.8 mm Glue Stick length 100mm Weight 0.20 kg Product Dimensions 160*30*150 mm This 15W Glue gun complies with the following Standards : Safety: IEC 60335-1 IEC 60335-2-45 AS/NZS 60335.1 AS/NZS 60335.2.45 EMC: EN 55014-1 EN 55014-2 EN 61000-3-2 EN 61000-3-3

our stringent quality specications. If you are not entirely satised with this product, please return it to your nearest ALDI store, within 60 days from the date of purchase, for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline. Made in China Workzone® is a registered trademark of ALDI Stores DISTRIBUTED BY: ALDI STORES 1 SARGENTS ROAD MINCHINBURY NSW 2770 www.aldi.com.au AUS 1300 889 028 (toll free) MODEL No.: PGG72H • 07/2019 10282 e-mail: [email protected]