Akytec MV210-212 Operation & User’s Manual

Parameter Value (unit) Register address Access Data format DEC HEX Reset pulse counter on input DI31 0 – reset 1 – do not reset 254 0хFE Read and write UINT 16 Reset pulse counter on input DI32 0 – reset 1 – do not reset 255 0хFF Read and write UINT 16 * Only for MV210-212. 5.5.2 Error codes for Modbus protocol When working on the Modbus protocol, errors may occur. These errors are described in Table 5.6. In case of an error, Module sends a response to the N ...

6 Configuration 6.1 Connection to akYtec Tool Pro The Module is configured in the akYtec Tool Pro program. The Device can be connected to a PC using the following interfaces: – USB (microUSB), – Ethernet. To select an interface: 1. Connect the module to the PC using a USB cable or Ethernet interface. NOTICE If the module is connected to the USB port, the main module power supply is not required. In case of connecting via Ethernet interface it is necessary to s ...

Parameter Value (unit) Register address Access Data format DEC HEX Debounce filter for input DI2* 0 – off; 1 – on 97 0х61 Read and write UINT 16 Debounce filter for input DI3* 0 – off; 1 – on 98 0х62 Read and write UINT 16 Debounce filter for input DI4* 0 – off; 1 – on 99 0х63 Read and write UINT 16 Debounce filter for input DI5* 0 – off; 1 – on 100 0х64 Read and write UINT 16 Debounce filter for input DI6* 0 – off; 1 – on 101 0х65 Read and wr ...

4.3 Power supply Fig. 4.2 Power supply contacts function CAUTION Using power supplies without potential isolation or with basic isolation of low voltage circuits from AC lines can lead to dangerous voltage in the circuits. ...