Akuvox R26B Manual 

Rubber Plug x 3(S,M,L) M3x5 screw x 4 Back cover x 1 Rope x 1 ST1.7x4 screw x 2 Silicon rubber sealing ring x 1 Status LED R26B Mainframe Accessories : ST4x20 screw x 4 Screw fixing seat x 4 Wall-mounting Accessories： M4x30 screw x 2 Wall-mounting screw x 6 R26B Cable Locking Plate x 1 R26B x 1 Name pad x 5 Ejection Pin x 1 M3x10.5 screw x 1 Wall-mounting bracket x 1 Speaker Pin hole Call button RF card reader Name pad Name pad cover Mic Photosensitive sensor Infrared LED Camera Infrared sensor Before you begin using the device, please check the version you got and ensure that the following items are included in the shipped box:

Without 86 embedded box in the wall Step 1: Bracket/Box Installa Wall Moun 2 R26B Fix the wall-mounting bracket on embedded box with two M4x30 screws. Mark the four holes of the wall-mounting bracket on the wall. Take down the M4x30 screws and remove the wall-mounting bracket. Fix the wall-mounting bracket with four ST4x20 screws and two M4x30 screws. Insert four screw fixing seats into the hole. Use a hand drill with 5mm diameter bit to make holes in the marked positions. Mark the four holes of the wall-mounting bracket on the wall for the screws and all cables will go through the green holes. Use a hand drill with 5mm diameter bit to make the hole in marked positions. *Please note the relative position in the left figure. Insert four screw fixing seats into the holes. Fix the wall-mounting bracket with four ST4x20 screws. 60.3mm 69mm 75mm 30mm 30mm

Step 3: Device Moun 3 R26B Fix six wall-mounting six screws in the back of R26B. For convenient wiring, hang R26B on the wall-mounting bracket with rope. Then insert the silicon rubber sealing ring into the groove. Make cables go through the back cover, connecting to the corresponding interfaces of the main board. Choose a suitable size rubber plug to compress cables , then fasten the locking cable plate with two ST1.7x4 screws. Fix the back cover with four M3x5 screws. 1.Place the device into the wall-mounting bracket, pull the device downward and ensure the groove of it hooks to the lock catches of the back box. 2.Use the Allen wrench to tighten the device with the screws. One M3x10.5 screw

Network Video Recorder (third party) SIP Video Phone LAN PoE PoE R26B R26B PoE PoE PC (third party) R26B R26B Change the Button Label Insert the ejection pin into the pin hole to eject the name pad cover. Take out the name pad and fill in the information you want. Put the name back into the slot and lay it flat. Press the name pad cover back in place to lock it.

light turns blue, voice system will enter IP announcement mode. 2. In announcement mode, the IP address will be announced periodically. 3. Press Call Button again to the announcement mode. 4. In announcement mode, phone announces "IP 0.0.0.0" if no IP address is gained. R26B IP Announcement 1. Access the Web UI: Input the IP address into browser to configure the phone. 2. Account Registration: On web UI, go to the path: Account -> Basic page Register Account and fill in the account information. ( Please refer to user manual for more information) 3. Configure the Push Button: On web UI, go to the path: Intercom -> Basic -> Push Button to configure the call number. 4. Configure the code to open the relay: On web UI, go to the path: Intercom -> Relay&Input -> Relay ID/DTMF and choose the DTMF code number in corresponding area. Make a call: 1. Press the call button to call indoor SIP Phone. 2. During the talk, called party can press pre-configured code number to unlock the door. Receive a call: Opera R26B supports Auto Answer by default. Incoming call from indoor device will be answered automatically.

ADD: 10/F, NO.56 GUANRI ROAD, SOFTWARE PARK II, XIAMEN 361009, CHINA www.akuvox.com R26B Notice Information Akuvox R26B firmware contains third-party open source software under the terms of the GNU General Public License(GPL). Akuvox is committed to meeting the requirements of the GNU General Public License (GPL) and will make all required source code available. The source code of software under the terms of GNU GPL can be downloaded online, http://www.akuvox.com/gpl Information contained in this document is believed to be accurate and reliable at the time of printing. This document is subject to change without notice, any update to this document can be viewed on Akuvox’ s website: http://www.akuvox.com © Copyright 2019 Akuvox Ltd. All rights reserved.