Haws 5010.6427SS Installation, Operation & Maintenance Instructions

No.2075000 (0) 1455 Kleppe Lane �Sparks, NV 89431-6467 �(775) 359-4712 �Fax (775) 359-7424 E-mail: [email protected] � website: www.hawsco.com Model 5010.6427SS INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS LIMITED WARRANTY HAWS® warrants that all of its products are guaranteed against defective material or poor workmanship for a period of one year from date of shipment. HAWS liability under this warranty shall be discharged by furnishing without charge F.O.B. HAWS Factory any goods, or part thereof, which shall appear to the Company upon inspection to be of defective material or not of first class workmanship, provided that claim is made in writing to company within a reasonable period after receipt of the product. Where claims for defects are made, the defective part or parts shall be delivered to the Company, prepaid, for inspection. HAWS will not be liable for the cost of repairs, alterations or replacements, or for any expense connected therewith made by the owner or his agents, except upon written authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages caused by defective materials or poor workmanship, except for replacements, as provided above. Buyer agrees that Haws has made no other warranties either expressed or implied in addition to those above stated, except that of title with respect to any of the products or equipment sold hereunder and that HAWS shall not be liable for general, special, or consequential damages claimed to arise under the contract of sale. The drinking fountain manufactured by HAWS is warranted to function if installation and maintenance instructions provided are adhered to. The units also must be used for the purpose for which they were intended. NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED, PROVIDED OR GIVEN BY HAWS. NOTE TO INSTALLER: Please leave this information with the Maintenance Department. SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS MODEL, PLEASE CALL: 1-800-766-5612 FOR PARTS CALL: 1-800-758-9378 (U.S.A. AND CANADA ONLY) MONDAY-THURSDAY: 6:00 A.M. – 4:00 P.M. PST FRIDAY: 6:00 A.M – 1:00 P.M. PST

NOTE: To remove head when used with electric water cooler, keep the inlet nipple from turning by holding it with locking pliers inside the fountain, beneath the basin. Step 1: Gain access to flow adjustment screw by removing cover nut and button (see Installation Drawing). Step 2: Adjust flow with screwdriver: clockwise for more flow, counterclockwise for less. Step 3: If desired flow is not obtained, clean screen located at base of valve body and make sure screwdriver stop is fully opened. Step 4: Replace button and cover nut. Note: Replacement cartridge, screen, and gasket are available as P/N VRK5010. © 2009 Haws® Corporation – All Rights Reserved HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.