ATrack WTG1 Operation & User’s Manual

ATrack Technology Inc. 4F., No. 12, Wunhu St., Neihu Dist., Taipei City 11445 Taiwan (R.O.C.) Tel: +886-2-27975852 Fax: +886-2-27974030 http://www.atrack.com.tw

Contents 1. Notification .............................................................................................................................. 3 1.1. Disclaimer .................................................................................................................................... 3 1.2. Copyright ...................................................................................................................................... 3 1.3. Warning ........................................................................................................................................ 3 2. Package Content ..................................................................................................................... 4 3. Tag Activation ......................................................................................................................... 5 3.1. Application Installation ................................................................................................................. 5 3.2. Tag Activation ............................................................................................................................... 5 4. Tag Data Structure .................................................................................................................. 9 5. Output Power V.S. Working Range Table ............................................................................ 9

11.. NNoottiiffiiccaattiioonn 11..11.. DDiissccllaaiim meerr This document, and all other related products, such as device, firmware, and software, is developed by ATrack Technology Inc. thoroughly. At the time of release, it is most compatible with specified firmware version. Due to the functionalities of the devices are being developed and improved from time to time, the change in the protocol, specification, and firmware functions are subjects to change without notice. ATrack Technology Inc. is obligated to modify all the documentation without the limitation of time frame. A change notice shall be released to ATrack Technology Inc. customers upon the completion of document modification. ATrack Technology Inc. products are not intended to be used as life support or rescue equipments. ATrack Technology Inc. is not liable for any loss or injury caused by using or referencing to any products. Any possible means of using or integrating ATrack Technology Inc. products shall be avoided. 11..22.. CCooppyyrriigghhtt ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries. Any or all parts of this document shall not be exposed to non-authorized party without any form of approval from ATrack Technology Inc. Any forms, including but not limited to oral, copy, or internet sharing, of releasing or exposing information to an unauthorized party shall be prohibited. ATrack Technology Inc. reserves the rights of litigation in the violation of such copyright laws 11..33.. W Waarrnniinngg Connecting the wire inputs can be hazardous to both the installer and your vehicle’s electrical system if not done by an experienced installer. This document assumes you are aware of the inherent dangers of working in and around a vehicle and have a working understanding of electricity.

22.. PPaacckkaaggee CCoonntteenntt When you open the package, verify that you received the following: WTG1 * 1

33.. TTaagg AAccttiivvaattiioonn 33..11.. AApppplliiccaattiioonn IInnssttaallllaattiioonn 1. The application RFID Tag Prog_V.APK will only be provided by ATrack. Please to consult your FAE to get the APK file. 2. Please install RFID Tag Prog_V.APK into the Andriod based gadget, and NFC technology is required. 3. The icon below can be found on your screen once the installation is done. 33..22.. TTaagg AAccttiivvaattiioonn 1. Open the APP and the screen below can be seen

2. Scan the area remarked by red frame on the tag with the NFC sensor 3. The screen below can be seen if the tag is detected

4. The screen below can be seen after clicking the WRITE button 5. To adjust the Transmit Interval and Output Power accordingly, and to click to make it Green and click the WRITE button to activate the tag.

6. The tag is activated successfully only if the message of Write Successful is shown.

44.. TTaagg DDaattaa SSttrruuccttuurree RSSI_1 Tag_ID_1 Single Tag 1 Byte 4 Byte RSSI_1 Tag_ID_1 RSSI_2 Tag_ID_2 RSSI_3 Tag_ID_3 … RSSI_X Tag_ID_X Multiple Tags 1 Byte 4 Byte 1 Byte 4 Byte 1 Byte 4 Byte … 1 Byte 4 Byte Single Tag Appended @P,F5CE,126,91,193755259546548,1499111810,1702,1702,121560966,25085786,39,2,11,990,18, 0,0,0,,2000,2000, ,AA03C55860 Multiple Tag Appended @P,F5CE,126,91,193755259546548,1499111810,1702,1702,121560966,25085786,39,2,11,990,18, 0,0,0,,2000,2000, ,AA03C558609503C55429A503C55876 55.. O Ouuttppuutt PPoow weerr VV..SS.. W Woorrkkiinngg RRaannggee TTaabbllee WTG+ WAR Working Range Output Power (dBm) Internal Antenna 10 80m 7 57m 5 47m 0 37m -10 7.5m -15 3.2m -20 80CM -30 20CM