ARH M402 Install Manual

Document version: 2016.09.28 Table of Contents HARDWARE OVERVIEW .......................................................................................................................................................................... 3 INSTALL THE HARDWARE ..................................................................................................................................................................... 4 1. MOUNTING ...................................................................................................................................................................................... 4 CONNECT THE CABLES ........................................................................................................................................................................... 5 1. CABLE LAYOUTS ............................................................................................................................................................................. 5 SOFTWARE REQUIREMENTS ................................................................................................................................................................ 6 ACCESSING THE CAMERA ..................................................................................................................................................................... 7 RECOMMENDED CAMERA POSITION.............................................................................................................................................. 9 MAINTENANCE / STORAGE ................................................................................................................................................................ 11 APPENDIX .................................................................................................................................................................................................... 12 CONTACT INFORMATION ................................................................................................................................................................... 14

1 2 HARDWARE OVERVIEW Camera with bracket Camera side Camera front Camera back 1 Sunshield 2 Bracket Adjustable. Can be rotated horizontally right or left (+/-5o) using the adjustment screws, to keep the camera horizontally. 3 Tilt adjustment screws Used when tilting the camera to set the field of view (+5/-15o). 4 Lens With fixed zoom and focus. 5 Infrared LEDs 8 SMD IR LEDs behind the protecting plates. 6 Red status LED Software configurable. Green Status LED Software configurable. Light / Color Sensor Senses the level of ambient light to determine when to switch day/night mode. Do not cover the light sensor otherwise the automatic brightness control will not operate properly. 7 Combined connector POE Network connection (more details at the Cable Layouts section). 3 7 4 5 6

INSTALL THE HARDWARE ADJUST THE BRACKET: 1. Place the camera on the roof of the vehicle and slightly tighten the bracket plate at the curve slots of the plate designed for this purpose. 2. Adjust the bracket into the desired position. Beware, fingers may be trapped and an injury may occur. 3. Tighten the screw back. 1. MOUNTING The bracket can be mounted onto different surfaces. Use appropriate screws for installation according to the mountable surface. Remove protective film from the protecting plate (on the camera front) before using the camera. It is recommended to secure the camera by a cable (carabiner) to the roof of the vehicle or to the vehicle roof rack. Do not overtighten the screws. Failures due to inappropriate installation void the warranty.

CONNECT THE CABLES If the cable is plugged correctly to the connector of the camera, the fastening ring of the plug should be turned clockwise to keep it tight and waterproof. 1. CABLE LAYOUTS POWER SPECIFICATIONS: Please use the proper input according to the specification and consider voltage drop if you use cables. Power requirement POE+ Power consumption 14 – 25 W Route the cable according to the image to avoid collecting rainwater at the socket. Technical specifications are subject to change without prior notice.