Argos 603/0263 Assembly Instructions Manual

Depth - 63.5cm Height - 103cm Issue 1 - 30/10/10 Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800 Assembly Instructions - Please keep for future reference 603/0263 603/0270

Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Make sure you have enough space to layout the parts before starting. • Do not stand or put weight on the product, this could cause damage. • Assemble the item as close room) as possible. • Assemble on a soft level surface to avoid damaging the • Parts of the assembly will be easier with 2 people. • We do not recommend the use of power drill/drivers for inserting screws , as this could damage the unit. Only use hand screwdrivers. • Dispose of all packaging carefully and responsibly. • Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners. • From time to time check that there are no loose screws on this unit. • This product should not be discarded with household waste. Take to your local authority waste disposal centre. Care and maintenance

Please check you have all the panels listed below 2 1 2 3 Seat (45 x 44cm) Back Frame (103 x 40cm) Leg x 2 (44 x 2.5cm) If you have damaged or missing components, call the Customer Helpline: 0845 640 0800

Tools required D Hex key x 1 Note: The quantities below are the correct amount to complete the assembly. In some cases more 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170 105 Components - Fittings A Bolt x 4 ( M8 x 90mm ) Bolt x 5 ( M8 x 50mm ) B Flat washer x 9 C E Spring washer x 9

front of seat 1 . Fasten legs 2 to seat 1 with bolts B , washers C and spring washers D . Please make sure C and D are assembled as shown. Replace the dust cover. Carefully turn the chair over and place it on the floor. Attaching the front legs 1 3 If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800 Argos Ltd MK9 2NW Assembly is complete B C D E D E A C 1 Attaching the seat to the back Place the back 3 on a covered table top. Remove the dust cover from seat 1 . Place the seat on back 3 and fasten it to the back with bolts A, and B washers C and spring washers D . Please make sure C and D are assembled as shown. 1 3 2 2 1 3 D E B C

Dimensions Width - 45cm Depth - 63.5cm Height - 103cm Issue 2 - 28/03/14 Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800 Assembly Instructions - Please keep for future reference 603/0270 603/0263

Important - Please read these instructions fully before starting assembly � Check you have all the components and tools listed on pages 2 and 3. • Keep children and animals away from the work area, small parts could choke if swallowed. • Make sure you have enough space to layout the parts before starting. • Do not stand or put weight on the product during assembly, this could cause damage. • Assemble the item as close room) as possible. • Assemble on a soft level surface to avoid damaging the • Parts of the assembly will be easier with 2 people. • We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers. • Dispose of all packaging carefully and responsibly. • Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners. • From time to time check that there are no loose screws on this unit. • This product should not be discarded with household waste. Take to your local authority waste disposal centre. Care and maintenance Remove all ttings from the plastic bags and separate them into their groups.

2 Back Frame (103 x 40cm) If you have damaged or missing components, call the Customer Helpline: 0845 640 0800 1 Seat (45 x 44cm) Leg x 2 (44 x 4.5cm) 2 3

Tools required 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170 105 Components - Fittings Note: The quantities below are the correct amount to complete the assembly. In some cases more D Hex key x 1 A Bolt x 4 ( M8 x 60mm ) Bolt x 5 ( M8 x 55mm ) B Flat washer x 9 C E Spring washer x 9

front of seat 1 . Fasten legs 2 to seat 1 with bolts A , washers C and spring washers D Please make sure C and D are assembled as shown. Replace the dust cover . Carefully turn the chair over and place it on the floor. Attaching the front legs 3 If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800 Argos Ltd MK9 2NW Assembly is complete A C D E 1 Attaching the seat to the back Place the back 3 on a covered table top. Remove the dust cover from seat 1 . Place the seat on back 3 and fasten it to the back with bolts B C spring washers using hex key . washers and D Please make sure C and D are assembled as shown. 1 3 2 2 1 3 D E B C 1 4 1 E E using hex key .