Aritech ATS1203 Manual
Text of the manual
© 2003 GE Interlogix B.V.
1051411
All Rights Reserved
10/2004
ATS1203/ATS1204
8-32 Zone DGP with 3A power supply
�
�
�
*=-, #=+, 0-Exit
...
2-Input status
0-Exit, Menu:
View Input State
Input No:
17, Normal, 113
*=-, #=+, 0-Exit
.....
32, Open, 226
*=-, #=+, 0-Exit
3-DGP settings
0-Exit, Menu:
1 DGP Address
*=Change, 0-Exit
Battery Load OFF
*=Change, 0-Exit
Mains Check ON
*=Change, 0-Exit
Static Outputs
*=Change, 0-Exit
4-Factory Reset
8-32 ZONE DGP WITH 3A POWER SUPPLY
General Installation
Information
1.
What Does it Do?
The ATS1203/ATS1204 provides zone expansion with 8 to
32 zones to ATS Control Panels with a built-in Power
Supply of max. 3A (total). Both the Mains Power Supply
and the Battery are monitored. The DGP also provides for
8 to 32 outputs occupying 2 DGP addresses when s
Only use units in a clean environment and not in humid air.
5.
Installation of ATS1203/ATS1204
(Ref. to figure �)
(1)
Earth connection. Use also for cable screen and lid
of box.
(2)
Processor
(3)
Mains power connection
(4)
Back-up battery
(5)
Pry-off tamper mounting location
To conform with CEI 79-2 regulations at level 2, the
use of the pry-off tamper i
