Crux AVIGM-04S Manual 

ON 1 2 3 40-PIN (male plug) 40-PIN (female plug) TO FACTORY RADIO SAFETY WARNING: THIS INTERFACE IS DESIGNED TO ACTIVATE VIDEO IN-MOTION TO ALLOW THE PASSENGER ACCESS TO THE ADDRESS INPUT WHILE THE VEHICLE IS IN-MOTION. THIS INTERFACE MAY CAUSE AN ERROR WHEN SERVICED AT THE OEM DEALER. BE AWARE THAT MOST DEALERS WILL ATTEMPT TO VOID THE MANUFACTURERS WARRANTY WHEN INSTALLING ANY AFTERMAR- KET EQUIPMENT. IMPROPER USE OF THIS INTER- FACE BY THE DRIVER MAY RESULT IN CITATION. DRIVER MUST KEEP FULL ATTENTION ON THE ROAD AND RESPONSIBILITY ON THE SAFETY OF THEIR PASSENGERS. INTERFACING SOLUTIONS A/V INPUT INTEGRATION FOR SELECT CHEVROLET VEHICLES 2012-2014 CHEVROLET: 2012 - 2014 Sonic 2012 - 2014 Spark AVIGM-04S + VCIP5 We recommend reading this installation guide first before starting any work. Following these instructions from “Start” to” Finish” will ensure a smooth and hassle free installation. We offer telephone support M-F 9:00 AM – 5:00PM PDT at 1 (855) 822-1348. We are here to help. PARTS INCLUDED: (1) GM-04S Interface (1) GM-04S Harness (1) GM-04S A/V Adaptor (1) VCIP5 (HDMI to Composite Cable) (1) Instruction PRECAUTIONS: - Remove the negative side of the battery to avoid any short circuits during the installation. - Do not install the interface near any major components or near the HVAC system. This may cause damage or overheating to the vehicle. - Do not disconnect the airbag connection behind the radio panel. PRELIMINARY: Please read the entire manual before installing this interface. Vehicle must be equipped with factory DVD changer. This interface does not activate DVD reader. INSTALLATION OVERVIEW TROUBLE SHOOTING 1. No video display while driving. - Make sure the dip switches are in the proper location. Rev. 030614 INSTALLING THE INTERFACE: 1. Remove the factory radio to gain access to the factory connectors. 2. Remove the 40-Pin connector from behind the radio. 2. Make the T-Harness connections behind the factory radio. (if the connectors do not match please contact tech support) 4. Set the dip switch to permanently activate the VIM feature. 5. Test the display while the car is in-motion to verify the VIM is active. Dip 1: This dip switch is the permanent solution for keeping the VIM unlocked. ALL OTHER DIP SWITCHES MUST BE SET TO OFF! SETTING THE DIP SWITCHES 8-PIN (male plug) 4 5 6 ON 1 2 3 40-PIN (male plug) 40-PIN (female plug) TO FACTORY RADIO From the factory radio, once you plug in the A/V Input Adaptor, You will notice the radio activate the AUX (Movie) source. With your composite device connected, begin watching your media to the factory display. The included VCIP5 allows you to mirror your image form your iPhone 5 to your factory screen. SELECTING THE A/V INPUT

(1-PIECE RADIO) A/V INPUT INTEGRATION FOR SELECT CHEVROLET VEHICLES 2012-2014 CHEVROLET: 2012 - 2014 Sonic 2012 - 2014 Spark AVIGM-04S + VCIP5 Rev. 030614 ADDITIONAL ITEMS FOR AVIGM-04S Using our 3.5mm A/V adaptor you are able to connect any composite output device to your factory screen. Our new VCIP5 cable allows you to connect your iPhone 5 to the composite input, when using the Apple Lightning to HDMI adaptor (Sold separately) When using our VCIP5 you will be able to mirror (one way) the display of your iPhone to your video screen. And all applications that allow you to rotate will fill the screen on the radio display. Applle Lightning to HDMI Adaptor Sold separately. Apple Part number: MD826ZM/A VCIP5 allows you to mirror the image from your iPhone to the factory display. Items like: Google Maps Home Videos Netflix Pandora + more iPhone & iPad are a registered trademark of Apple Inc Connects to iPhone 5/5C/5S/ iPad Included You can also utilize the Apple Charge port on the HDMI Adaptor to charge your device. RCA OUPUTS HDMI CONNECTION VCIP5 3.5mm A/V ADAPTOR (Included)