Burndy PATRIOT IN-LINE MD-LW Series Safety Operating & Maintenance Instructions

Hazard has a medium level of risk. Hazard has a low level of risk. SYMBOL MEANING SAFETY INFORMATION The above symbols are used to call your attention to instructions concerning your personal safety. Look for these symbols; read and follow the instructions that accompany them. Failure to follow the safety information provided can lead to serious personal injury or death. TABLE OF CONTENTS (English) Safety Information .......................................................3 Description...................................................................5 Speci ...

The U.S. DOT enacted new regulations in 2008 that apply to shipments containing Lithium ion batteries. Whenever possible, Lithium ion batteries should be sorted from other rechargeable batteries. Shipment of a non-Call2Recycle container of Lithium ion batteries for recycling must adhere to the following requirements, in addition to the safety requirements listed on the opposite side: · Each individual rechargeable battery, or cell phone with battery, must be placed into a separate bag (or terminals taped) to ensure safe storage and shipping; · Pa ...

in bodily injury and/or property damage. The service life of a tool can be greatly improved with proper care and maintenance. To extend the life of your battery tool, follow the recommended maintenance tasks outlined below. • Always engage the activation trigger lock button and then remove the battery prior to working on the tool. • Keep the tool exterior clean at all times. Remove dirt, debris, and other foreign substances from external surfaces daily to help prevent corrosion and damage to ...

1. Read and follow the PRE-OPERATION instructions and Battery Charger Instruction Manual. 2. Ensure that jaws are fully open by depressing the black retraction trigger. 3. Select and install the appropriate die set, if applicable, for the connector and cable combination being crimped. Insert a battery into the tool and disengage the activation trigger lock only after all body parts are clear of the jaw pinch point. 4. Position the tool properly on the connector making certain that the die is aligned over the crimp area indicators. 5. Insert the ...

provided for your tool and for the battery charger (see Battery Charger Instruction Manual) and accessories. Failure to follow the proper operating instructions and safety information provided can lead to serious personal injury or death. Before operating your PATRIOT® IN-LINE® Crimper/ Cutter, carefully read and follow these PRE-OPERATION instructions to ensure your tool is in proper working condition. Read and follow the Battery Charger Instruction Manual included for operating your battery charger unit ...