Arctiko LRE 700 Installation And Operational Manual

If any deviations to the criteria of acceptance are found, the below table shall be filled out to document that a corrective action has been initiated and/or finalized. In case of deviations, which cannot be corrected on site, please contact the distributor of the appliance for support in correction of the deviation(s). DEVIATION REPORT Deviation report no. Type of deviation Describe the deviation Describe the correction of the deviation CHECKED/TESTED BY DATE SIGNATURE VERIFIED BY DATE SIGNATURE ...

Prepare the appliance for the Operational Qualification by mounting test probes. Place the test probes inside the appliance as described in below table and as shown in below illustration (see the red arrows). Each test probe must be loaded with a 25 gr. brass block (or equivalent) to ensure precise temperature measurement. LRE/LFE 700 PROBE LOCATION Probe no. 1 45 cm distance from the top of the interior cabinet Probe no. 2 Center of the chamber (72 cm distance from the top of the interior cabinet) Probe no. 3 45 cm distance from the bottom of the i ...

Each person, who participates in the present IQ/OQ qualification, shall fill out the signature list below in order to establish traceability to the test signatures. All devices used for the execution of the current IQ/OQ shall be noted in below device list. SIGNATURE LIST NAME (CAPITAL LETTERS) JOB TITLE DATE AND SIGNATURE DEVICE LIST DESCRIPTION BRAND MODEL DATE OF CALIBRATION ...

Prepare the appliance for the Operational Qualification by mounting test probes. Place the test probes inside the appliance as described in below table and as shown in below illustration (see the red arrows). Each test probe must be loaded with a 25 gr. brass block (or equivalent) to ensure precise temperature measurement. LRE/LFE 700 PROBE LOCATION Probe no. 1 45 cm distance from the top of the interior cabinet Probe no. 2 Center of the chamber (72 cm distance from the top of the interior cabinet) Probe no. 3 45 cm distance from the bottom of the i ...

CHECK (√) COMMENTS Packaging & protection mate- rial Ensure all packing material has been re- moved Ensure all protection foil has been removed from the cabinet and display Cabinet Ensure no scratches on exterior cabinet Ensure no scratches on interior cabinet Ensure no cracks on plastic frames Door Ensure the door can open and close Ensure the door can be locked using the key Ensure no gap between gasket and frame Ensure no scratches Castors Ensure that the castors are locked (if equipped with castors) Feet Ensure that the feet are levelled (if equippe ...