Brother HL-L8250CDN Quick Setup Manual

Drum Unit (pre-installed) Toner Cartridges (Black, Cyan, Magenta and Yellow; pre-installed) Waste Toner Box (pre-installed) Power Cord USB Interface Cable Quick Setup Guide Product Safety Guide CD-ROM Belt Unit (pre-installed) Read the Product Safety Guide first, and then read this Quick Setup Guide for the correct installation procedure. NOTE: For a network connection you will need to purchase a network • interface cable. Please use the supplied USB cable for a USB connection. USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 meters long. Network cable Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network. 1. Press a or b to display General Setup, and then press OK. 2. Press OK to select Local Language. 3. Press a or b to select your language, and then press OK. 1 Remove the packing material from the machine 2 Load paper in the paper tray 3 Connect the power cord and turn on the machine 4 Select your language Adjust the paper guides. Quick Setup Guide HL-L8250CDN The latest manuals are available at Brother Solutions Center: http://solutions.brother.com/. Not all models are available in all countries. Version 0 CHN-ENG

Configuration without using the CD-ROM (Windows® without CD-ROM drive or Macintosh) 5 Follow the on-screen instructions until the Connection Type screen appears. Follow the on-screen instructions to continue the installation. NOTE: If connection is unsuccessful, repeat this step. Download the full driver and software package from the Brother Solutions Center. (For Windows®) solutions.brother.com/windows (For Macintosh) solutions.brother.com/mac For USB Connection For Wired Network Connection Connect a network cable first.