Berkeley Varitronics Systems WallHound-Pro Operation & User’s Manual

Introduction……………………………………………………………………… 2 Unboxing………………….……………………………………………………... 2 Main Measurement Screen………………………………………………….... 3 Main Menu Options ….……………………………………………………….... 5 Demodulated Device Measurement Screen……………………………….... 7 Whitelist Measurement Screen………….……………….………………….... 8 WallHound-Pro Screen Flow Diagram……………………….…………….... 9 WallHound-Pro Hardware…………………………………………………….... 10 Mounting Your WallHound-Pro……………………………………...……….... 12 WallHound-Pro Mechanical Drawings. ……………...………………….….... DF Antenna Specifications…………………………….………………….….... Dry Contact Wiring Diagram……………………….……………………….....

continuous wave 2.4 GHz and 5 GHz continuously for PEDs (Personal Electronic Devices) including cell phones, smart watches, tablets, computers, wireless headphones or earbuds, digital cameras and any wireless recording devices or bugs. The unit is designed to function with minimum interaction from any security personnel while scanning for wireless device usage that has been discouraged or prohibited from certain spaces. Spaces requiring wireless threat detection include government SCIFs (Sensitive Compartmented Information Facility), court rooms, visiting centers, military bases, law enforcement facilities, correctional centers, conference rooms, etc. WallHound-Pro is completely self-contained and requires no connection to any PC to fully function. The unit can be affixed to any wall or optional stanchion mount making it portable. WallHound-Pro alerts are loud and visible to all staff, visitors and security personnel making it a wireless threat detector and also a deterrent that reminds everyone to refrain from using any wireless devices in secured areas where they are prohibited or illegal. Once WallHound-Pro detects wireless activity, the device (and possibly its user) must be located (using products such as Yorkie-Pro handheld wireless intrusion detector) and then determined to be a threat or not. If the device (and user) are deemed harmless, the device can be whitelisted using WallHound-Pro’s built in software so that it will not trigger any future alerts. All parameters and adjustments are made only from WallHound-Pro’s built-in touchscreen by designated security personnel including auto and manual thresholds, alert settings, international cellular bands and more. WallHound- Pro supports optional direction finding antennas allowing users to pinpoint specific corridors and areas of interest without triggering alerts in other areas where wireless devices are allowed. Unboxing WallHound-Pro unit ships with omni-directional antennas and power supply. The optional DF antenna kit will arrive in this same box (18” x 23” x 11” (30 lbs)) but optional stanchion kit will arrive in one separate box. WallHound-Pro optional stanchion mount ships in one box (33” x 17” x 7”) that includes base weight, pole and L bracket with handle. Total weight of optional stanchion mount is 30 lbs.

WallHound-Pro Main Measurement screen allows control and monitoring over all CW wireless signals detected as well as alerts for demodulated devices. The buttons at the top flash when demodulated devices trigger alerts as well as navigate to those lists of detected devices. Navigates to cellular phone screen Navigates to list of 2.4 GHz Wi-Fi detected access points. Navigates to list of 5 GHz Wi-Fi access points. Navigates to list of Bluetooth detected devices. Navigates to list of Bluetooth Low Energy (BLE) detected devices. Toggles between audible voice alerts, audible siren alert or muted alerts with no audio at all. Resets all watermarks (thin green line above the current signal strength detected). Displays current country code of cellular bands being scanned. Touch this country code to see all cellular and Wi-Fi band designations that are currently being scanned.

Displays current charge to internal battery system. Internal battery lasts 2-5 hours depending upon amount of nearby wireless activity. Cellular band being actively scanned (red indicates active). Cellular band not being actively scanned (grey indicates no scanning). Thin green watermark indicates strongest signal strength detected since last watermark reset. Red bar indicates signal has surpassed the currently set threshold. Manual threshold setting indicated by red color. Touch this indicator and once it blinks, it can be adjusted using the up/down threshold arrows only while the ‘manual thresh’ button blinks. Auto threshold setting indicated by white color. Auto threshold can be toggled on and off by tapping the white ‘auto thresh’ button. If you have already manually adjusted any thresholds, you will probably see those white indicators automatically move into their auto threshold spots. 2.4 GHz continuous wave (CW) energy measurement. This measurement does not reflect any demodulated signals used in Bluetooth or Wi-Fi devices. 2.4 GHz CW can originate from cellular phones and also a variety of devices including wireless cameras, baby monitors and microwave ovens. 5 GHz continuous wave (CW) energy measurement. This measurement does not reflect any demodulated signals used in Bluetooth or Wi-Fi devices. 5 GHz CW can originate from cellular phones and also a variety of devices including wireless cameras, drones and baby monitors. Navigates to main menu where users can fine tune a variety of alert and scan settings. Inhibits scanning of all cellular, Wi-Fi, bluetooth, BLE, 2.4 GHz CW and 5 GHz CW signals. Simply touch this button and then choose one or more buttons on the top to inhibit. Raises the threshold manually for any blinking red indicators. This should decrease the amount of alerts triggered for those particular signals. Toggles thresholds to be adjusted manually. This button will continue to blink while in manual mode allowing each signal’s threshold to be manually adjusted. Toggles thresholds into automatic mode allowing WallHound-Pro to determine the noise floor and most reliable threshold settings by itself. Lowers the threshold manually for any blinking red indicators. This should increase the amount of alerts triggered for those particular signals.

WallHound-Pro Main Menu screen can be reached from nearly any other screen by touching the rectangular icon with three lines. This screen provides many adjustments as well as the unit’s serial number and firmware. Touch this button at any time in any screen to return to the previous screen. Press the left yellow arrow to decrease brightness of the main alert display on a scale of 1 to 10. Press the right yellow arrow to increase brightness. Press the left or right yellow arrow to toggle between 3 different visual alert modes: burst, strobe or none. Burst is a gradual fade up and down. Strobe flashes on and off. None turns off the large visual alerts. Press the left or right yellow arrow to toggle between 2 different visual alert modes on the LCD touchscreen: flash or none. The device detected will flash on and off when flash is shown. There will be no device icon shown at all if none is shown Press the left or right yellow arrow to adjust siren or voice alert volume on a scale from 1 to 10. Press the left or right yellow arrow to toggle the battery audible alert ON or OFF. WallHound-Pro normally operates on AC power, so this monitor only refers to the power remaining in the internal sealed backup battery. The internal battery provides 2-5 hours of power depending upon amount of nearby wireless activity. Choose between watermark reset choices: MANUAL, 5 SECS or 30 SECS. Selecting MANUAL allows users to view a profile of signals built up over time such as overnight when security personnel might not be present. The other two selections will simply erase the watermarks automatically after 5

Toggles between 3 different screensaver modes displayed on the touchscreen when the unit is not being actively used: OFF, STEALTH and CLOCK. OFF shows all RF activity measurements and no screensaver at all. STEALTH simply shows nothing, as if the unit is turned off entirely. CLOCK shows time, date and current temperature. The actual temperature is accurate and displayed in either Celsius or Fahrenheit degrees. The temperature sensor is mounted in the back of the unit shown here. Touch the BACK button to begin the screensaver of your choice and touch anywhere on the screen again to exit screensaver mode. Set the time and date for both the screensaver clock mode and the timestamps of every measurement. Change the rate at which Wi-Fi, BT, BLE measurements are displayed on their respective screens by choosing between 4 rates: always on, always off, 10 seconds and 10 minutes. These settings only affect the demodulated measurements. For example, only the last Wi-Fi scan result will be shown when it is set to always off. You might need to experiment with these settings depending upon environment. BVS recommends 10 seconds for busy RF environments and 10 minutes for less busy RF environments. Change the country you are operating WallHound-Pro within, thereby changing the cellular channels being scanned and displayed as well as international Wi-Fi bands. Choose between UNITED STATES, EUROPE, CANADA, AUSTRALIA, NEW ZEALAND, ISRAEL, INDIA, BRAZIL, SWEDEN, JAPAN, CHILE, PHILIPPINES, SOUTH KOREA, GUATEMALA, COSTA RICA and TRINIDAD. The country selected is also displayed on the MAIN MEASUREMENT screen according to its 2 letter country code in the upper right corner of the Main Measurement Screen.

WallHound-Pro lists all Wi-Fi 2.4 GHz, Wi-Fi 5 GHz, Bluetooth and Bluetooth low energy demodulated devices detected in their respective lists. The screen shown above is only for Bluetooth devices, but the same descriptions and features apply to all types of demodulated devices. Sort through all devices detected based upon their RSSI (Received Signal Strength Indicator) in dBm. Touch button to toggle between highest and lowest signal strength. Sort through all devices detected based upon their timestamp of the last time that device was Each device detected includes MAC address, device name, RSSI in dBm and time stamp of last detection. Device names that appear in red have broken the threshold set by the user. Scroll between multiple pages of devices detected. Press this button to add devices into the whitelist of known, friendly devices. So long as this button blinks you may add devices one by one. Press this button again when you are finished adding to the whitelist. Navigate to whitelist of known devices where you may delete devices from that list. Set threshold for all demodulated devices in this list. Raising this threshold should decrease the amount of alerts triggered in this particular list. Lowering this threshold should increase the amount of alerts triggered in this particular list.

This screen only displays devices that are currently whitelisted. From this list, whitelisted devices can be viewed, sorted and removed similar to the previous screen. The whitelist screen shown above only displays Bluetooth devices, but the same whitelisting features apply to all types of demodulated devices. Sort through all devices detected based upon their RSSI (Received Signal Strength Indicator) in dBm. Touch button to toggle between highest and lowest signal strength. Sort through all devices detected based upon their latest timestamp Each device detected includes MAC address, device name, RSSI in dBm and time stamp of last detection. Device names that appear in red have broken the threshold set by the user. Scroll between multiple pages of devices detected. Remove whitelisted devices one by one from this whitelist and place them back into the Demodulated Device measurement list. Remove all whitelisted devices at once from this whitelist and place them back into the Demodulated Device measurement list.

everything you need to start securing your facility from wireless threats including a power supply, (3) omni-directional antennas, wall mounting hardware and (2) keys. Optional hardware supported includes a portable stanchion mounting kit and directional antenna mounting kit. Use the included power transformer to both power and charge WallHound-Pro’s internal backup battery. After securely connecting and tightening the connector, press the power button to turn on your unit. Be sure to provide AC power to your unit for several hours to fully charge the internal backup battery. Once charged, the backup battery allows WallHound-Pro to be disconnected from AC power and moved around without interruption of wireless detection.

key to prevent tampering. Settings such as thresholds, alerts and even power may not be changed while the WallHound-Pro is locked. In addition, WallHound-Pro’s touch screen requires a six digit PIN code in order to make any changes using the touchscreen even while the unit is physically unlocked. The PIN code is preset at the factory. If you lose your PIN code, contact BVS at 732-548-3737 or [email protected]. WallHound-Pro includes dry contacts allowing users to connect external alarms and recording devices upon wireless detection by WallHound-Pro. Consult this manual further down for a wiring diagram or contact your BVS sales or support representative for answers to questions. WallHound-Pro includes a USB port for firmware updates. Contact your BVS support representative for firmware updating procedures to your unit. WallHound-Pro supports an optional direction finding antenna kit including (2) dual band directional antennas to cover both 2.4 GHz and 5 GHz, (1) wideband directional antenna covering 700 MHz to 2.7 GHz, mounting brackets and cables. Simply unscrew the SMA mounted omni-directional antennas that are included with your unit and replace them with the directional antennas. Be sure to connect the larger wide band antenna to the center SMA connector and smaller directional antennas on either side of the larger one. All of these antennas cover the frequency range of any common wireless threat, but the directional antennas allow much more flexibility in your unit’s placement and coverage. For example, you may have to experiment a little if you wish to only detect wireless activity in a narrow corridor and secure rooms but exclude a nearby area in the opposite direction where wireless devices are more commonly used and not prohibited.

allowing the unit to be easily moved and placed into temporary security setups without access to AC power for instance. Simply slide the back of the unit onto the mounting plate included with your optional stanchion pole. Use a long (at least 8 inches) Philips head #1 screwdriver to fully secure the unit to the stanchion mount. Mounting Your WallHound-Pro The VideoSecu ultra slim flat mounts are incredibly easy to install, and feature a low-profile, sliding plate design that places the WallHound or WallHound-Pro very close to the wall for a clean look, while also providing a unique combination of simplicity and security. Its maximum load weight is 66 lbs. And it is VESA 75/100 comlplaint. .

Remote Power Light bulb as a Warning/Alarm Remote Ground Three examples of remote alarm triggered from a dry contact in your BVS product (Similar outputs are provided in all wall-mounted BVS products) Siren as a warning/alarm Remote Ground Visual and/or audio alarm in one BVS wall-mounted products: WallHound WallHound-Pro WatchHound-Pro Vcc2 Remote Power

www.ixysic.com DS-CPC1017N-R10 1 CPC1017N 60V Normally-Open Single-Pole 4-Pin SOP OptoMOS® Relay Part # Description CPC1017N 4-Pin SOP (100/tube) CPC1017NTR 4-Pin SOP (2000/reel) Parameter Rating Units Blocking Voltage 60 VP Load Current 100 mArms / mADC On-Resistance (max) 16  LED Current to operate 1 mA Applications Features Description Ordering Information Pin Configuration • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls • Designed for Use in Security Systems Complying with EN50130-4 • Only 1mA of LED Current Required to Operate • 1500Vrms Input/Output Isolation • High Reliability • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Immune to Radiated EM Fields • Halogen Free • Tape & Reel Version Available • Small 4-Pin SOP Package • Flammability Rating UL 94 V-0 The CPC1017N is a miniature single-pole, normally-open (1-Form-A) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The super-efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division’s patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient infrared LED. IXYS Integrated Circuits Division’s state of the art double-molded vertical construction packaging enables CPC1017N to be one of the world’s smallest relays. It offers board space savings of at least 20% over the competitor’s larger 4-pin SOP relay. Switching Characteristics of Normally-Open Devices Form-A IF ILOAD 10% 90% ton toff Approvals 1 2 3 4 + Control – Control Load Load • UL Recognized Component: File E76270 • CSA Certified Component: Certificate 1172007 • EN/IEC 60950-1 Certified Component: Certificate B 13 12 82667 003

www.ixysic.com 2 R10 CPC1017N Absolute Maximum Ratings @ 25ºC Parameter Ratings Units Blocking Voltage 60 VP Reverse Input Voltage 5 V Input Control Current Peak (10ms) 50 mA 1 A Input Power Dissipation 70 mW Total Power Dissipation 1 400 mW Isolation Voltage, Input to Output 1500 Vrms Operational Temperature -40 to +85 ºC Storage Temperature -40 to +125 ºC 1 Derate linearly 3.33 mW / ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current Continuous 1 IF=2mA IL - - 100 mArms / mADC Peak t=10ms ILPK - - ±350 mAP On-Resistance 2 IL=100mA RON - - 16  Off-State Leakage Current VL=60VP ILEAK - - 1 A Switching Speeds Turn-On IF=5mA, VL=10V ton - - 10 ms Turn-Off toff - - 10 ms Output Capacitance IF=0mA, VL=50V, f=1MHz COUT - 5 - pF Input Characteristics Input Control Current to Activate 3 IL=100mA IF - 0.4 1 mA Input Control Current to Deactivate - IF 0.3 - - mA Input Voltage Drop IF=5mA VF 0.9 1.2 1.5 V Reverse Input Current VR=5V IR - - 10 A Common Characteristics Capacitance, Input to Output VIO=0V, f=1MHz CIO - 1 - pF 1 Load current derates linearly from 100mA @ 25ºC to 80mA @ 80ºC. 2 Measurement taken within 1 second of on-time. 3 For applications requiring high temperature operation (greater than 60ºC) a minimum LED drive current of 3mA is recommended. Electrical Characteristics @ 25ºC Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements.

Customer Support Berkeley Varitronics Systems, Inc. Liberty Corporate Park 255 Liberty Street Metuchen, NJ 08840 8:00 AM to 6:00 PM EST Toll Free: 888-737-4287 Phone: 732-548-3737 Fax: 732-548-3404 24/7 (expect a reply within one day) email: [email protected] www.bvsystems.com