CDVI V1SR Installation Manual

File Specifications

Brand: CDVI
Category: Locks
Model: V1SR (Installation Manual), prU3r7f8wOD7A
File Info: Adobe Acrobat PDF (DjVu)
File Size: —
Pages: 20 pages

Download PDF

Download CDVI V1SR Manual (20 pages)

Read Online:

Read the CDVI V1SR Installation Manual online using the built-in PDF viewer.

Key Pages of Document

The installer’s choice

cdvi.se SVENSKA SE ENGLISH EN V1SR V3S V3SR V3SRB V4S V4SR V4SRB V5S V5SR V5SRB V3S - V3SR - V3SRB V1SR V4S - V4SR - V4SRB V5SRB V5S - V5SR - V5SRB Surface Mount Electromagnetic locks Utanpåliggande elektromagneter ...

V1SR - V3S - V3SR - V3SRB - V4S - V4S - V4SR - V4SRB - V5S - V5SR - V5SRB

Surface Mount Electromagnetic locks EN INSTALLATION MANUAL 1] PRODUCT PRESENTATION The V3S, V4S and V5S series with signalling are suitable for the new regulations covering assistance to persons with reduced mobility. Thank you for buying our products and for the confidence you placed ...

V1SR - V3S - V3SR - V3SRB - V4S - V4S - V4SR - V4SRB - V5S - V5SR - V5SRB

Surface Mount Electromagnetic locks EN INSTALLATION MANUAL 3 cdvi.se cdvigroup.com POWER SUPPLY An electromagnetic lock always operates in DC current, a very low safety voltage. The Diax® electromagnetic lock is recommended for use with power supplies manufactured by CDVI, however, o ...

3] PACKAGE CONTENTS

Surface mount magnetic lock Armature plate Fixing plate Roll pin 5x16 Steel washer 4x25 wood screw Key 3mm Key 5mm 1 1 1 2 2 7 1 1 M8x35 screw M8x25 screw 3x8 self-tapping screw Guide piece Cap nut Safety rope Rubber washer Installation manual 1 1 1 1 1 2 1 1 Surface mount magnetic lock Armature plate Fixing plate ...

5] ELECTRICAL CONNECTIONS

The NO/NC signal only switches when the door is closed with the power to it on. TERMINAL BLOCK CORRESPONDENCE V3S V4S - V5S V3SR - V3SRB - V4SR V4SRB - V5SR - V5SRB + 12 or 24V dc - - 0 V N.C NC (Normally closed) - COM COM - N.O NO (Normally open) - WITH BUILT-IN PCB BOARD 12V dc Factory Setup 12V dc 12V dc 12V dc 24V dc 24V dc 24V ...

6] INSTALLATION (EXAMPLE: V3S SERIES)

DIRECT CONNECTION 12V DC 24V DC CONTACT Red Red Yellow NC Blue COM Orange NO + + White White - - Green Green Black Black fixing plate Security rope Security rope Armature plate M8 screw Cap nut Guide piece Rubber washer Roll pin Steel washer Rubber washer Fixing plate Door frame Outwards opening d ...

Inward opening door (Pull door)

(installed with “Z” and “L” brackets) Z shaped bracket : Z3Z4Z5 L shaped bracket : - L3L4 (300 - 400 Kg), - L5 (500kg). L shaped bracket Z shaped bracket Installation on an inward opening door (Pull door) Fixing screw Rubber washer Roll pin Steel washer Armature plate M8 s ...

Armature housing for glass door

UBKU Rubber washer Roll pin Steel washer Armature screw Outward opening door (Push door) (installed with UBKU brackets) Installation with base for glass door OUTSIDE INSIDE DOOR FRAME Electromagnetic lock Armature plate Universal base for glass doo ...

8] FAULT FINDING

Installation with DPM300 - DPM400 - DPM500 (Door position monitoring)* Roll pin Armature plate Electromagnetic lock DPM300 Fixed on the armature DPM300 Fixed on the electromagnetic lock PROBLEM POSSIBLE CAUSE SOLUTION Door locking impossible The lock is not receiving DC current. - Check that the wires are connected to the right terminals. ...

V1SR - V3S - V3SR - V3SRB - V4S - V4S - V4SR - V4SRB - V5S - V5SR - V5SRB

Surface Mount Electromagnetic locks EN INSTALLATION MANUAL 9] NOTES 10 cdvi.se cdvigroup.com ...

CDVI V1SR user guide recommended for: V5SR, SOLARKPW, C5S12, V3E32, V3S.

⚠️ Download Safety

The Locks Installation manual (20 pages) is completely safe to download (last scan date: 06/03/2026).

Related PDF Instructions for CDVI V1SR: