EK EKS213-BT Instruction Manual

TABLET CRADLE AND KARAOKE DEMO DISC BLUETOOTH CD+G KARAOKE SYSTEM FOR THOUSANDS OF THE BEST FREE KARAOKE SONGS GO TO easykaraoke.com/youtube

We strongly suggest that you carefully study these instructions before attempting to operate the system, and that you note all the listed precautions. Contents P2 Precautions P3 Mains Power Information P3 Safety information P4-5 Control Locations P5 Media Dock Cradle Connection P6 Connections P6 Connecting the power P6 DC Operation PRECAUTIONS • Avoid exposure of the system to rain or moisture. . • Handle the microphone carefully, dropping or other shocks may cause failure. • Avoid using the system where it may be subjected to heat, such as in direct sunlight, near radiators or other heat sources. • Should any liquid be spilt on the system, stop using it immediately. It may be possible to dry the system, but you • Take care with the mains power supply. If damaged in any way, do not use the system, and technician for repair. • Only use the system with the supplied components, do not attempt to use with any other mains power supply adapter or microphone. • Please dispose of old batteries in an environmentally friendly manner in accordance with the relevant legislation. • Do not use any solvents to clean any part of the EKS213-BT system. shall be placed on the apparatus. • Where the mains plug is used as the disconnect device, the disconnect device shall remain readily accessible. P7 Connecting to your TV P7 Selecting Your Karaoke Machine P7 Audio Connections P8-9 Disc Operations P11-12 Troubleshooting P10 Bluetooth Operations P13 P14 Contact Details EKS213-BT Instruction Manual • Under the environment with electrostatic discharge the sample may malfunction and need user reset to recover sometimes.

hazardous radiation exposure. LASER SAFETY DANGER: Invisible laser radiation when open and interlock failed or defeated avoid direct exposure to beam. CAUTION: hazardous laser radiation when open and interlock defeated. This symbol means that this unit is double insulated. An earth connection is not required. SAFETY INFORMATION MAINS POWER INFORMATION CAUTION RISK OF ELECTRIC SHOCK! DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting the risk of electric shock is present in this unit. CAUTION RISK OF ELECTRIC SHOCK! DO NOT OPEN! CAUTION RISK OF ELECTRIC SHOCK! DO NOT OPEN! Mains power using the supplied AC adaptor 1. Connect the mains adaptor to a UK mains outlet. 2. Connect the adaptor plug into the rear mains socket (22) NOTE: Please ensure you only use the supplied mains adaptor with this unit. 3. Switch the mains power on.

STANDBY indicator 2. FUNCTION button 3. PROGRAM/ REPEAT button 4. STOP/ PAIR button 5. CDG INDICATOR 6. PLAY/PAUSE INDICATOR 7. LED DISPLAY 8. PROGRAM INDICATOR 9. REPEAT INDICATOR 10. PLAY/PAUSE button 11. SKIP button 12. SKIP button 13. Light ON/OFF button 14. BALANCE Control 15. Auto Voice Control 16. ECHO Control 17. Loudspeaker 18. Disco Light 19. MIC Volume Control 20. Master Volume Control 21. Handle BACK PANEL 22. VIDEO OUT Socket 23. AUDIO OUT Socket (R) 24. AUDIO OUT Socket (L) 25. DC IN Jack 26. Battery Door 27. LINE IN Jack 28. MIC 1 Jack 29. MIC 2 Jack 30. CD Door

BATTERY PRECAUTIONS The battery precautions below should be followed when using batteries in this device. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. Do not mix different type of batteries together (e.g. Alkaline and Carbon Zinc) or old batteries with fresh ones. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. Do not try to recharge batteries not intended to be recharged, they can overheat and rupture (Follow battery manufacturer’s directions). Rechargeable batteries are to be removed from the product before being charged. Rechargeable batteries are only to be charged under adult supervision. Exhausted batteries are to be removed from the product. The supply terminals are not to be short-circuited. Batteries shall not be exposed to excessive heat such 1 . Gently snap in the dock cradle via the 2 mounting holes at the back of the karaoke machine until the cradle is locked in place on both ends securely. Cradle 2. Insert your mp3 player / tablet / smart phone into the cradle and connect via Bluetooth or the supplied 3.5mm cable to your device at the headphone or aux out to the line in input at the back of the unit. 3. The line input and Bluetooth selction will override the CD audio playback features of the machine.

Plug the supplied AC power adaptor to DC IN jack located on the rear panel of the product and the main power. STANDBY indicator will light up to half brightness. CAUTION: The unit is designed to operate from a mains supply of AC 100-240V~50/60Hz. The supplied AC power adaptor has a polarized plug that fits into the wall outlet only one way. NOTES: When the unit is not operated by the AC power or unused for long periods of time, please remove the AC mains plug from the wall outlet and unplug from the main unit. label located on the rear or base of the unit. If the socket outlets in your home are not suitable for the plug supplied The mains plug is used as the disconnect device, the disconnect device shall remain readily operable. DC OPERATION 1. Lift battery door to reveal battery compartment. Insert six (6) “C” size alkaline batteries (not provided) as indicated. 2. Replace cover tightly before operating. 3. When not using batteries for a long period of time, remove batteries to prevent leakage in compartment. Replace all batteries at the same time. Do not mix old batteries with new ones. IMPORTANT: The AC power adaptor MUST be disconnected from the unit or it will not operate on battery power. CONNECTING TO YOUR TV OR VCR / DVD PLAYER Your karaoke machine is designed to connect to your TV the same way you would connect most video cameras, VCR / DVD players or video games consoles. We have provided RCA cables to connect your unit to a TV, VCR / DVD player, video device or an external audio / sound system. The RCA cables have three connections at each end (white and red are for left and right audio connections and the yellow is for video connections). Please follow the steps below to display CD+G lyrics on the TV screen: 1. Locate the multi-coloured RCA cables 2. Connect video cable (yellow) to the video out of the back of the Karaoke Machine 3. Connect the other end of the video cable (yellow) to the video input on your TV or VCR / DVD player VIDEO INPUT REAR VIEW OF TV VIDEO INPUT (Yellow Jack) REAR VIEW OF KARAOKE SYSTEM VIDEO OUTPUT (Yellow Jack)

Selecting your Karaoke Machine as a source / input on your TV is very similar to connecting a VCR/DVD or Satellite system. We’ve listed below the most common ways of selecting the source from your TV or VCR / DVD player: 1. In the set up menu of the TV or VCR / DVD player there may be an option for “Input Select” where you can choose between “Cable/Ant., Video 1, Video 2, etc” as the input source. 2. Look for a TV channel between the highest and lowest on your TV or VCR / DVD player (i.e AUX, EXT, LINE 1 or LINE IN) 3. Your remote control for either your TV or VCR / DVD player may have source input selections as well as detailed as the following: “Video, Video 1, Game, AUX, EXT or LINE-IN.” Choosing one of those sources in most cases should display the lyrics from your Karaoke Machine as well. AUDIO CONNECTION As an alternative to listening to the audio through your TV, you can listen through your home stereo system. Connect the unit to your home stereo system using the White and Red connections on the supplied AV cable. You may require an additional red/white lead (not included) to reach your home stereo system. Plug the white end of the cable into the white AUDIO OUT socket on the unit. Plug the red end of the cable into the red AUDIO OUT socket on the unit. Now connect the other end of the cable’s white (left channel) and red (right channel) plugs to your home stereo system’s ‘AUX IN’ sockets. AUX INPUT AUX INPUT REAR VIEW OF TV AUDIO INPUT L (White Jack) TV SCART INPUT 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AUDIO INPUT R (Red Jack) VIDEO OUTPUT (Yellow Jack) REAR VIEW OF KARAOKE SYSTEM AUDIO OUTPUT SCART ADAPTER CONNECTION (FOR TV WITH SCART INPUT) AUDIO OUTPUT L (White Jack) R (Red Jack) VIDEO INPUT (Yellow Jack)

Resist the urge to swing the microphone around by the cord! PREPARATION This unit is designed to play CD’s bearing the not play properly. ● Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion from the centre of the disc to the outside edge. ● Never use chemicals, such as record cleaning sprays, antistatic clean compact discs. These chemicals will permanently damage the plastic surface of the disc. ● Always place the compact disc on the disc tray with the label facing upward. Compact discs can be played on only one side. ● To remove a disc from its storage case, press down on the centre of the case and lift the disc out, holding it carefully by the edges. ● Discs should be returned to their cases after use to protect them from dust and scratches. ● To prevent warping the disc, do not expose it to direct sunlight, high humidity or high temperatures for extended periods of time. ● Do not apply paper or write anything on either side of the disc. The inks used in some felt-tip pens may damage the surfaces of the disc. TURNING ON/OFF ● To turn on the unit, press the STANDBY button, the Standby Indicator will light to full brightness. ● To turn it off, press the STANDBY button again, the Standby Indicator will light to half brightness. LOADING A DISC ● Lift up CD door to open CD/CDG compartment door. Place a disc in the compartment with the printed side facing toward you. ● Gently close the CD door to the CD/CDG compartment. The karaoke system begins to read the disc. After that, press PLAY/ PAUSE to play the disc. (If no disc is loaded, it will display “no”). (Refer to the Trouble Shooting Guide on page 10 if a disc is loaded but the total tracks do not appear). PLAY/PAUSE MODE ● To start playing, press the PLAY/PAUSE 1 ] will be displayed on the LED display. ● To temporarily stop playing, press the PLAY/PAUSE button. ● To resume play, press this button again. PLEASE NOTE: Pressing pause when a CDG is playing may cause distorted lyrics on the monitor. Any distortion will remain until the whole screen is refreshed during an instrumental break or you stop the song and start it from the beginning. PLAYING CD OR CD+G DISC ● Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level. ● Adjust MIC VOLUME/A.V.C./ECHO/BALANCE controls as needed to achieve the desired mix of music and vocals through your sound system. ● Do not press the disc cover of the CD compartment while it’s playing. ● Never place anything except a compact disc on the disc tray. Foreign objects can damage the unit. ● Do not apply excessive force to disc cover. ● Only place one disc on the disc tray at a time.

LED display). SKIP (FOR BOTH CD & CDG DISCS) ● During STOP mode, you can skip up or down to your desired track by pressing or holding a SKIP button ( SKIP ). ● To resume playing the selected song, press PLAY/PAUSE button. SEARCH (FOR AUDIO CD DISC ONLY) When playing any audio CD, press and hold the SKIP button ( SKIP ). The CD will search at high speed in the forward or backward direction. Normal play will continue when you release the SKIP button. REPEAT ● To repeat the track currently playing, press the REPEAT button once. The REPEAT LED will blink. ● To repeat all tracks, press the REPEAT button twice. The REPEAT LED will stay lit. ● To clear the REPEAT function, press the REPEAT button again. The REPEAT LED will turn off. PROGRAM ● Use this button to program and play back songs in a preselected order. Step 1: Programming should be done in the stop mode only. Press the PROGRAM button. The PROGRAM LED will turn on and the LED will read “0“ Step 2: Press the double arrow keys ( SKIP ) to select a desired track. Step 3: Press PROGRAM Step 2: Press PLAY button when you have completed programming and you are ready to start singing. ● Press the STOP button to clear all the programmed entries. DISCO LIGHT FUNCTION ● To illuminate the Disco Light, press the Disco Light ON/OFF button to switch it ON ● Press it again to switch if OFF KARAOKE FUNCTIONS Sing along with the music by plugging in the provided microphone into either one of the microphone sockets on the unit. ECHO Adjust the ECHO control to enhance your voice for a concert hall effect. BALANCE Adjust the Energy Saving (Auto Power System-APS) The unit will automatically turn to ‘Standby’ mode in 15 minutes in the following situations: 1) There is no CD in the compartment or the playback of CD has been stopped. 2) No line-in cable plugged into the AUX IN jack. The unit can be resumed to turn on by pressing the STANDBY button once. APS is for energy saving purpose. BALANCE control between the pre-recorded singer’s voice and the music when using a multiplex karaoke disc. AUTO VOICE CONTROL AUTO VOICE CONTROL can be activated by the AVC control. The vocals on the multiplex recording will be muted when the singer starts to sing through the microphone. When the singer stops singing, the vocals will resume to normal. LINE IN OPERATION USING LINE IN Connect an audio cable (not included) from the LINE IN Socket on this unit to the external unit’s LINE OUT Socket. This will allow you to broadcast the external unit’s sound through this unit’s speaker DISC OPERATIONS

2. The LED display shows “BT” and flashes quickly. 3. Using the native controls on your Bluetooth Device, select the "EKS213BT" in your Bluetooth setting to pair. 4. When successfully paired, “BT” on LED display will stop flashing. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the devices. If your device become unpaired, follow the above steps to pair again. If any pairing issues occur, un-pair the unit on your Bluetooth device and follow the above steps and try again. 1. Follow the instructions for Pairing a Bluetooth Device. 2. Use the native controls on the connected Bluetooth Device to select a track. 3. To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device. 4. Audio playback from the connected Bluetooth device can now be heard through the speaker. PLAYING MUSIC VIA BLUETOOTH 1 Press FUNCTION button to toggle to Bluetooth mode. 5. Now go to easykaraoke.com/youtube for thousands of the best karaoke songs available.

• No power plug connection at the AC outlet. • Improper connection between the unit and the AC power adaptor. • Insert the power plug into the AC outlet • Check the connection between the unit and the AC power adaptor. • The AC outlet may not have power. • Check the outlet with a working lamp or other electrical appliance. No sound from TV or PA. • TV or PA system is set to minimum • TV or PA system is powered Off • Patch cords are not connected securely. • Turn up the volume on the TV or PA system • Power the TV or PA system on. • Ensure white and red patch cords are securely inserted into both the karaoke system and the TV/ PA system. CD Player does not work normally or the LED displays “ ”, “ ”, or “ ”. • Disc is inserted upside down • Disc is dirty • Disc is scratched • Disc is warped • A non standard disc is inserted • Moisture has formed inside the CD deck • Karaoke system needs resetting • Insert the disc correctly • Wipe clean with a soft cloth • Use a new disc • Use a new disc • Only use discs bearing the standard logo as described on page 8 • Wait about 20 - 30 mins to let it dry out. • Disconnect the machine from the power source for 30 seconds then reconnect No sound - If audio is going through TV or VCR. • Source Selection on TV or VCR is not correct. • Patch cords are not connected securely • Follow directions on page 7. • Ensure white and red patch cords are securely inserted into both the karaoke system and the home stereo system. TROUBLESHOOTING • Turn off the unit, disconnect the mains plug, and reconnect after a few seconds. The unit does reset to operation of any button. • Under the influence of electrostatic phenomenon, the product may malfunction and require user to disconnect.

is connected to a home stereo. • Source Selection on your stereo is not set properly • Improper Connection to stereo system or PA • Patch cords are not connected securely. • Select AUX IN as the source for your home stereo • Follow direction on page 7 for connecting to a home stereo system • Ensure white and red patch cords are securely inserted into both the karaoke system and the home stereo system No song lyrics appear on the TV screen • Video cable is not connected properly to the TV • Source selector on TV is not set to VIDEO • TV does not have video line input • A CDG is loaded but the CD+G icon is not lit • Connect the video cable to the karaoke system’s VIDEO OUT and to the TV VIDEO IN. Refer to page 8 under Connecting to your TV or VRC / DVD player • Using your TV remote to select VIDEO input or select the proper VIDEO input on the TV itself. (Refer to page 6 under Connect- ing to your TV or VRC / DVD player. • Connect from VIDEO OUT of the system to the VIDEO IN on your VCR or connect to an RF Modulator and then to the TV cable input. Refer to “Connec- tions” on page 7. • Check the disc to be sure it is a CDG. No sound from mic • Mic volume control is set to minimum • Mic is off • Adjust mic volume to max, and then re-adjust to a comfortable level • Turn on mic with the ON/OFF switch located on the microphone TROUBLESHOOTING No sound when playing audio via Bluetooth. • Your Bluetooth device does not paired properly. • Pair your Bluetooth device according to the "Bluetooth setup" section. • The volume control of your Bluetooth device is set at too low. • Increase the volume of your Bluetooth device. • The volume control of the unit is set at too low. • Increase the volume of the unit by VOLUME control.

Number of programs Sampling system 100 Hz - 20 kHz 50 dB 20 STEPS RANDOM ACCESS PROGRAMMING 8 TIMES OVER SAMPLING Microphone -73 dB 600 OHMS IMPEDANCE WITH Ø 6.3mm DYNAMIC MICROPHONE Mains Input Power AC 100-240V ~ 50/60Hz Dimensions 314W x 192D x 210H mm Weight 2 kg Accessories AV CABLE PRE-RECORDED KARAOKE CD+G DISC DYNAMIC MICROPHONE incurring any obligation. TABLET CRADLE AC POWER ADAPTOR 5 watt + 5 watt RMS

Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please make yourself aware of the local collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. This appliance complies with the following EEC directives: 2006/95/EEC/ Low voltage directive / EMC directive In the event of any problems installing or using this Easy Karaoke machine, please contact your local retailer or email [email protected] We will endeavour to reply to all correspondence within 24 hours of receipt Easy Karaoke Ltd Graham Lloyd Building Midland Structures Industrial Estate Ampthill Road Bedford MK42 9JJ www.easykaraoke.com

Warning! This logo set on the product means that the recycling of this apparatus comes within the framework of the Directive 2002/96/CE of January 27, 2003 concerning the Waste of Electrical and Electronic Equipment (WEEE). This symbol means that used electrical and electronic products should not be mixed with general household wste. There is a separate collection system for these products. If you want to dispose of this equipment, please do not use the ordinary dust bin! - The presence of dangerous substances in the electrical and electronic equipments can have potential consequences on the environment and human health in the cycle of reprocessing this product. - Therefore, at the end of its lifetime, this product shall not be disposed with other non-recycled waste. Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. - Local authorities and resellers have set special procedures for the purpose of collecting and recycling this product (please contact your local authority for further details). You have the obligation to use the selective waste collection systems put in place by your local authority. - If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. - By disposing.of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. This appliance complies with the RED Directive 2014/53/EU & the EMC Directive 2014/30/EU of the European Parliament and the Council and the mutual recognition of their conformity. https://cdn.shopify.com/s/files/1/0364/6701/5819/files/EKS213_RED_certificate.pdf?v=1620223608