Charder HM80M Operation & User’s Manual

If head stopper is loose, please assemble as seen below: 1. 2. 3. B. Assembly with Infant Scale (removable measurement tray) 1. Attach bracket to tray using bracket screws*2 2. Slide HM80M onto bracket, and press buckle to secure SS-5611 bracket ...

Caution, consult accompanying documents before use Authorized representative in the European Community Manufacturer of medical device Indicates that device conforms to Regulation (EU) 2017/745. Four digit number refers to Notified Body. Manufacturing year of medical device Indicates that device is a medical device Device catalogue number Serial number Manufacturer's batch or lot number Unique Device Identifier Carefully read user manual before installation and usage, and follow instructions for use. ...

Locate buckle at bottom of height rod. Press down on buckle and slid out height rod. ...

1. Attach bracket to device, and fasten screws using screwdriver. Version with rubber head pad Version without rubber head pad 2. Connect height measure attachment (HM80D or HM80M) to bracket. A clicking noise will be heard. Attach bracket here rubber head pad rubber head pad Attach bracket here ...

1. Attach bracket to device, and fasten screws using screwdriver. Version with rubber head pad Version without rubber head pad 2. Connect height measure attachment (HM80D or HM80M) to bracket. A clicking noise will be heard. Attach bracket here rubber head pad rubber head pad Attach bracket here ...

1. Attach bracket to device, and fasten screws using screwdriver. Version with rubber head pad Version without rubber head pad 2. Connect height measure attachment (HM80D or HM80M) to bracket. A clicking noise will be heard. Attach bracket here rubber head pad rubber head pad Attach bracket here ...

No.103, Guozhong Rd., Dali Dist., Taichung City 41262 Taiwan Tel: +886-4-2406 3766 Fax: +886-4-2406 5612 Website: www.chardermedical.com E-mail: [email protected] Copyright© Charder Electronic Co., Ltd. All rights reserved. This user manual is protected by international copyright law. All content is licensed, and usage is subject to written authorization from Charder Electronic Co., Ltd. (hereinafter Charder) Charder is not liable for any damage caused by a failure to adhere to requirements stated in this manual. Charder reserves the right ...

A. General Information ............................................................. 5 II. Installation ........................................................................... 7 A. Attaching head stopper ......................................................... 7 B. Assembly with Infant Scale (removable measurement tray) ...... 7 C. Assembly with MS5900 Infant Scale ....................................... 8 D. Assembly with MS2400 Infant Scale ..................................... 11 III ...