Casio AT-3 Manuallines
Text of the manual
High Grade Keyboard
Operations
AT-3
WK-7600
WK-6600
CTK-7200
CTK-6200
P a g e | 1
This section explains how to record to the system track and how to record to tracks 01 through 16.
1. Press the C-5 (SONG SEQUENCER) button to enter the song sequencer mode.
2. Press the C-6 (RECORD) button.
3. Press Tone (R1-R12) and choice your favorite tone. Example “StereoGrand Piano “ Press R-14 (-,+)
button or use the dial to change your favorite tone or voices.
4. Steps to configure the beat:
While holding down the R-13 (FUNCTION) button, press the C-17 ( MENU) button.
This will display a menu like the one shown below, with the ● next to “Beat”.
Use the dial or R-14 (-,+) button to configure the beat setting of 2/4, 8/4, 2/8 etc.
Use the R-17 (˅) button to move the ● to “Metronome” and then use the R-14
(-,+) buttons to turn the metronome “off”.
Use the R-17 (˅) button to move the ● to “Precount” and then use the R-14 ( -,+)
buttons to turn the precount “on”.
Press the R-15 (EXIT) button to exit the menu.
P a g e | 2
5. Press the L-17 (START/STOP) button to start recording and start playing on the keyboard
after the precount.
6. To stop the recording, press the L-17 (START/STOP) button.
7. For recording the next track 2, press C-6 (RECORD) button.
8. Then press R-17 ( ˃ ) button to select to track 2 or next track for another track recording.
9. Press Tone (R1-R12) and choice your favorite tone for Track 2 . Example “ Bass “.
10. Press the L-17 (START/STOP) button to the start the previous recording.
11. Then play the current track while overlapping the previous track.
12. To stop the recording, press the L-17 (START/STOP) button. Two tracks has been recorded.
13. To proceed to Track 3, 4, 5 etc with different instruments recording follow steps 7 – 12 .
14. After all the recording Press the L-17 (START/STOP) button to hear the song sequence.
15. END
P a g e | 3
1. Press the C-5 (SONG SEQUENCER) button to enter the song sequencer mode.
2. Use the dial or R-14 (-,+) buttons to select a song area number. For Example ( as shown
above previous recording “ User Song 1” *1 = which means data recording is done.)
3. Hold the R-13 (FUNCTION) button as you press the C-17 (MENU) button.
4. Use the R-17 (˅) button to select “ Clear Track “ or “Clear Song”.
5. For “Clear Track” after selection, then press R-17 ( ˃ ) button to select which track to be deleted.
Then Press R-16 (ENTER) button then press R-14 (YES) button to execute.
6. For “Clear Song” after selection, then use the dial or R-14 (-,+) buttons to select
“[SONG] *1”. Then Press R-16 (ENTER) button then press R-14 (YES) button to execute.
7. END
P a g e | 4
1. Press the L-9 (USER RHYTHMS) button. Press R-14(-,+)button or use the dial to select “No
Data”.
2. Press the C-4 (PATTERN SEQUENCER) button to enter the pattern sequencer mode.
3. Press the C-6 (RECORD) button.
4. Steps to configure the beat:
While holding down the R-13 (FUNCTION) button, press the C-17 ( MENU) button.
This will display a menu like the one shown below, with the ● next to “Quant”.
Use the dial or R-14 (-,+) button to configure the beat setting of 4,8,8T,16,16T.
Ex. Use “16”
Use the R-17 (˅) button to move the ● to “Precount” and then use the R-14 (-,+)
buttons to select “1”.
Use the R-17 (˅) button to move the ● to “Playcord” and then use the R-14 ( -,+)
buttons to select the playcord “C, C7, Cm”. Ex. Use “C”.
Use the R-17 (˅) button to move the ● to “Metronome” and then use the R-14
( -,+) buttons to turn the metronome “ on ”.
Press the R-15 (EXIT) button to exit the menu.
5. Press GM/Drum (R1-R12) and choice your favorite drums. Example “StandardSet1“ Press R-14
(-,+) button or use the dial to change your favorite drums.
6. Press the L-17 (START/STOP) button to start recording and start playing on the keyboard
after the precount. It will count 16 measure loop.
7. Press the L-17 (START/STOP) button to stop the recoding.
P a g e | 5
