Akai MPD218 Manual 

Introduction................................................................................................................................. 3 System Requirements & Product Support.............................................................................. 3 Installation & Setup .................................................................................................................... 4 Operation .................................................................................................................................... 5 MPD218 .................................................................................................................................. 6 MPD226 .................................................................................................................................. 7 MPD232 ................................................................................................................................ 10 MPK225 ................................................................................................................................ 13 MPK249 & MPK261 .............................................................................................................. 15 Trademarks & Licenses ........................................................................................................... 19

controllers in Bitwig Studio. These control mappings enable you to use each supported controller for basic track-mixing, clip- and scene-launching, and more when you are using its Bitwig Studio program. To get started, see the Installation & Setup chapter install the files you just downloaded. System Requirements & Product Support For complete system requirements, compatibility information, and product registration, visit the Akai Professional website: akaipro.com. For additional support, visit akaipro.com/support.

In order for Bitwig Studio to recognize your controller, you need to install the “script” file you just downloaded and select your controller in the Preferences. To do this: 1. Move the script file you just downloaded to the location for your operating system: • Windows: [your user directory]\My Documents\Bitwig Studio\Controller Scripts\ • Mac OS X: [your user directory]/Documents/Bitwig Studio/Control Scripts/ 2. Connect your controller’s USB port to your computer, and make sure your controller is powered on. 3. Open Bitwig Studio. 4. In Bitwig Studio, click the Options menu, and select Preferences. 5. Click the Controllers tab, and then click Detect available controllers. Bitwig Studio will automatically detect and recognize your controller. 6. Click OK to close the Preferences window. 7. Select and load the Bitwig program on your controller, and get started! Important: Each time you use your controller with Bitwig Studio, select the Bitwig Studio program by doing the following: 1. Press Preset. The display will show the current program name (flashing). 2. Turn the Data Dial to browse through the list of available programs. Select the Bitwig program, and then press the Data Dial.

MPD218 MPK225 MPD226 MPK249 MPD232 MPK261 Important: Each time you use your controller with Bitwig Studio, select the Bitwig Studio program by doing the following: 1. Press Preset. The display will show the current program name (flashing). 2. Turn the Data Dial to browse through the list of available programs. Select the Bitwig program, and then press the Data Dial.

MPD218 with Bitwig Studio. Pads: Press the pads to play the active instrument track. Press Pad Bank to change the current pad bank. Knobs: Turn the knobs to control macros or parameters of the active track, depending on your MPD218’s current control bank: • Control Bank A: Turn the knobs to control Macros 1–6 of the current device. • Control Bank B: Turn the knobs to control Parameters 1–6 of the current device. • Control Bank C: Turn the knobs to control Parameters 7–12 of the current device. Press Ctrl Bank to change the current control bank.

MPD226 with Bitwig Studio. Transport Buttons (Stop, Play, Record): Press these buttons to stop playback or recording (Stop), start playback or recording (Play), or record-arm the active track(s) (Record). Pads: Press the pads to play MIDI notes or to launch clips or scenes, depending on the current mode: • Instrument Mode: Press the pads to play MIDI notes on the active track. If the track’s instrument is Drum Machine, pads that have a corresponding instrument for that note will be lit. • Clip Mode: Press the pads to trigger clips; the pads act as a 4x4 Clip Launcher. A pad’s color indicates its current state: o Green: The clip in that slot is playing. o Amber: There is a clip in that slot, but it is not playing. o Red: The clip in that slot is recording. o Off: There is no clip in that slot. Press Pad Bank to change the scene of clips that the pads will trigger. Pad Bank A corresponds to Scenes 1–4, Pad Bank B corresponds to Scenes 5–8, and Pad Bank C corresponds to Scenes 9–12. • Scene Mode: Press the pads to trigger scenes (columns of clips). Each pad corresponds to the scene with the same number (e.g., Pad 1 triggers Scene 1, Pad 2 triggers Scene 2, etc.). Use the switches in Control Bank A to select the current mode (described below).

bank: • Control Bank A: Turn the knobs to control Macros 1–4 of the primary device. • Control Bank B: Turn the knobs to control the Pan knobs of the tracks. Each knob corresponds to the track with the same number (e.g., Knob 1 controls the panning of Track 1, Knob 2 controls the panning of Track 2, etc.). • Control Bank C: Turn the knobs to control the Send for Effect Track 1 of the tracks. Each knob corresponds to the track with the same number (e.g., Knob 1 controls the send level of Track 1, Knob 2 controls the send level of Track 2, etc.). Press Ctrl Bank to cycle through the control banks. Faders: Move the faders to control certain parameters, depending on MPD226’s current control bank: • Control Bank A: Move the faders to control the first 4 macros of the current device. • Control Bank B: Move the faders to control the Volume faders of the tracks. Each fader corresponds to the track with the same number (e.g., Fader 1 controls the volume of Track 1, Fader 2 controls the volume of Track 2, etc.). • Control Bank C: Move the faders to control the Send for Effect Track 2 of the tracks. Each fader corresponds to the track with the same number (e.g., Fader 1 controls the send level of Track 1, Fader 2 controls the send level of Track 2, etc.). Press Ctrl Bank to cycle through the control banks.

depending on MPD226’s current control bank: • Control Bank A: Press a switch to select the mode for the pads: o Switch 1: Press Switch 1 to select Instrument Mode (described above). o Switch 2: Press Switch 2 to select Clip Mode (described above). Once you are in this mode, you can press Switch 2 to switch between Tracks 1–4 and Tracks 5–8. o Switch 3: Press Switch 3 to select Scene Mode (described above). o Switch 4: Press Switch 4 to turn notifications on or off. When on, a small message will appear when you adjust a control, enter another mode, etc. • Control Bank B: Press the switches to record-arm or -disarm the tracks. Each switch corresponds to the track with the same number (e.g., Switch 1 record-arms or -disarms Track 1, Switch 2 record-arms or -disarms Track 2, etc.). • Control Bank C: Press the switches to mute or unmute the tracks. Each switch corresponds to the track with the same number (e.g., Switch 1 mutes or unmutes Track 1, Switch 2 mutes or unmutes Track 2, etc.). Press Ctrl Bank to cycle through the control banks.

MPD232 with Bitwig Studio. Transport Buttons (Stop, Play, Record): Press these buttons to stop playback or recording (Stop), start playback or recording (Play), or record-arm the active track(s) (Record). Pads: Press the pads to play MIDI notes or to launch clips or scenes, depending on the current mode: • Instrument Mode: Press the pads to play MIDI notes on the active track. If the track’s instrument is Drum Machine, pads that have a corresponding instrument for that note will be lit. • Clip Mode: Press the pads to trigger clips; the pads act as a 4x4 Clip Launcher. A pad’s color indicates its current state: o Green: The clip in that slot is playing. o Amber: There is a clip in that slot, but it is not playing. o Red: The clip in that slot is recording. o Off: There is no clip in that slot. Press Pad Bank to change the scene of clips that the pads will trigger. Pad Bank A corresponds to Scenes 1–4, Pad Bank B corresponds to Scenes 5–8, and Pad Bank C corresponds to Scenes 9–12. • Scene Mode: Press the pads to trigger scenes (columns of clips). Each pad corresponds to the scene with the same number (e.g., Pad 1 triggers Scene 1, Pad 2 triggers Scene 2, etc.). Use the switches in Control Bank A to select the current mode (described below).

bank: • Control Bank A: Turn the knobs to control Macros 1–8 of the primary device. • Control Bank B: Turn the knobs to control the Pan knobs of the tracks. Each knob corresponds to the track with the same number (e.g., Knob 1 controls the panning of Track 1, Knob 2 controls the panning of Track 2, etc.). • Control Bank C: Turn the knobs to control the Send for Effect Track 1 of the tracks. Each knob corresponds to the track with the same number (e.g., Knob 1 controls the send level of Track 1, Knob 2 controls the send level of Track 2, etc.). Press Ctrl Bank to cycle through the control banks. Faders: Move the faders to control certain parameters, depending on MPD232’s current control bank: • Control Bank A: Move the faders to control the first 8 macros of the current device. • Control Bank B: Move the faders to control the Volume faders of the tracks. Each fader corresponds to the track with the same number (e.g., Fader 1 controls the volume of Track 1, Fader 2 controls the volume of Track 2, etc.). • Control Bank C: Move the faders to control the Send for Effect Track 2 of the tracks. Each fader corresponds to the track with the same number (e.g., Fader 1 controls the send level of Track 1, Fader 2 controls the send level of Track 2, etc.). Press Ctrl Bank to cycle through the control banks.

depending on MPD232’s current control bank: • Control Bank A: Press a switch to select the mode for the pads: o Switch 1: Press Switch 1 to select Instrument Mode (described above). o Switch 2: Press Switch 2 to select Clip Mode (described above). Once you are in this mode, you can press Switch 2 to switch between Tracks 1–4 and Tracks 5–8. o Switch 3: Press Switch 3 to select Scene Mode (described above). o Switch 4: Press Switch 4 to turn notifications on or off. When on, a small message will appear when you adjust a control, enter another mode, etc. o Switch 5: Press Switch 5 to shift the “clip window” up by one scene. (The clip window is the 4x4 area of clips you can launch with the pads in Clip Mode.) o Switch 6: Press Switch 6 to shift the “clip window” down by one scene. (The clip window is the 4x4 area of clips you can launch with the pads in Clip Mode.) o Switch 7: Press Switch 7 to instrument mode select the previous device in the active track’s device chain. Clip/scene select prev track o Switch 8: Press Switch 8 to instrument mode select the next device in the active track’s device chain. Clip/scene select prev track • Control Bank B: Press the switches to record-arm or -disarm the tracks. Each switch corresponds to the track with the same number (e.g., Switch 1 record-arms or -disarms Track 1, Switch 2 record-arms or -disarms Track 2, etc.). • Control Bank C: Press the switches to mute or unmute the tracks. Each switch corresponds to the track with the same number (e.g., Switch 1 mutes or unmutes Track 1, Switch 2 mutes or unmutes Track 2, etc.). Press Ctrl Bank to cycle through the control banks.

with Bitwig Studio. Transport Buttons (Stop, Play, Record): Press these buttons to stop playback or recording (Stop), start playback or recording (Play), or record-arm the active track(s) (Record). Pads: Press the pads to play MIDI notes or to launch clips or scenes, depending on the current mode: • Instrument Mode: Press the pads to play MIDI notes on the active track. If the track’s instrument is Drum Machine, pads that have a corresponding instrument for that note will be lit. • Clip Mode: Press the pads to trigger clips; the pads act as a 4x2 Clip Launcher. A pad’s color indicates its current state: o Green: The clip in that slot is playing. o Amber: There is a clip in that slot, but it is not playing. o Red: The clip in that slot is recording. o Off: There is no clip in that slot. Press Pad Bank to change the scene of clips that the pads will trigger. Pad Bank A corresponds to Scenes 1–4, Pad Bank B corresponds to Scenes 5–8, Pad Bank C corresponds to Scenes 9–12, and Pad Bank D corresponds to Scenes 13–16. • Scene Mode: Press the pads to trigger scenes (columns of clips). Each pad corresponds to the scene with the same number (e.g., Pad 1 triggers Scene 1, Pad 2 triggers Scene 2, etc.). Use the switches in Control Bank A to select the current mode (described below).

bank: • Control Bank A: Turn the knobs to control Macros 1–8 of the primary device. • Control Bank B: Turn the knobs to control the Pan knobs of the tracks. Each knob corresponds to the track with the same number (e.g., Knob 1 controls the panning of Track 1, Knob 2 controls the panning of Track 2, etc.). • Control Bank C: Turn the knobs to control the Send for Effect Track 1 of the tracks. Each knob corresponds to the track with the same number (e.g., Knob 1 controls the send level of Track 1, Knob 2 controls the send level of Track 2, etc.). Press Ctrl Bank to cycle through the control banks. Switches: Press the switches to select modes or enable/disable certain track parameters, depending on MPK225’s current control bank: • Control Bank A: Press a switch to select the mode for the pads: o Switch 1: Press Switch 1 to select Instrument Mode (described above). o Switch 2: Press Switch 2 to select Clip Mode (described above), allowing you to launch clips for Tracks 1–4. o Switch 3: Press Switch 3 to select Clip Mode (described above), allowing you to launch clips for Tracks 5–8. o Switch 4: Press Switch 4 to select Scene Mode (described above). • Control Bank B: Press the switches to record-arm or -disarm the tracks. Each switch corresponds to the track with the same number (e.g., Switch 1 record-arms or -disarms Track 1, Switch 2 record-arms or -disarms Track 2, etc.). • Control Bank C: Press the switches to mute or unmute the tracks. Each switch corresponds to the track with the same number (e.g., Switch 1 mutes or unmutes Track 1, Switch 2 mutes or unmutes Track 2, etc.). Press Ctrl Bank to cycle through the control banks.

Important: Remember to select and load the Bitwig program each time you use your MPK249/MPK261 with Bitwig Studio. Transport Buttons (Stop, Play, Record): Press these buttons to stop playback or recording (Stop), start playback or recording (Play), or record-arm the active track(s) (Record). Pads: Press the pads to play MIDI notes or to launch clips or scenes, depending on the current mode: • Instrument Mode: Press the pads to play MIDI notes on the active track. If the track’s instrument is Drum Machine, pads that have a corresponding instrument for that note will be lit. • Clip Mode: Press the pads to trigger clips; the pads act as a 4x4 Clip Launcher. A pad’s color indicates its current state: o Green: The clip in that slot is playing. o Amber: There is a clip in that slot, but it is not playing. o Red: The clip in that slot is recording. o Off: There is no clip in that slot. Press Pad Bank to change the scene of clips that the pads will trigger. Pad Bank A corresponds to Scenes 1–4, Pad Bank B corresponds to Scenes 5–8, Pad Bank C corresponds to Scenes 9–12, and Pad Bank D corresponds to Scenes 13–16. • Scene Mode: Press the pads to trigger scenes (columns of clips). Each pad corresponds to the scene with the same number (e.g., Pad 1 triggers Scene 1, Pad 2 triggers Scene 2, etc.). Use the switches in Control Bank A to select the current mode (described below).

current control bank: • Control Bank A: Turn the knobs to control Macros 1–8 of the primary device. • Control Bank B: Turn the knobs to control the Pan knobs of the tracks. Each knob corresponds to the track with the same number (e.g., Knob 1 controls the panning of Track 1, Knob 2 controls the panning of Track 2, etc.). • Control Bank C: Turn the knobs to control the Send for Effect Track 1 of the tracks. Each knob corresponds to the track with the same number (e.g., Knob 1 controls the send level of Track 1, Knob 2 controls the send level of Track 2, etc.). Press Ctrl Bank to cycle through the control banks. Faders: Move the faders to control certain parameters, depending on MPK249’s/MPK261’s current control bank: • Control Bank A: Move the faders to control the first 8 macros of the current device. • Control Bank B: Move the faders to control the Volume faders of the tracks. Each fader corresponds to the track with the same number (e.g., Fader 1 controls the volume of Track 1, Fader 2 controls the volume of Track 2, etc.). • Control Bank C: Move the faders to control the Send for Effect Track 2 of the tracks. Each fader corresponds to the track with the same number (e.g., Fader 1 controls the send level of Track 1, Fader 2 controls the send level of Track 2, etc.). Press Ctrl Bank to cycle through the control banks.

depending on MPK249’s/MPK261’s current control bank: • Control Bank A: Press a switch to select the mode for the pads: o Switch 1: Press Switch 1 to select Instrument Mode (described above). o Switch 2: Press Switch 2 to select Clip Mode (described above), allowing you to launch clips for Tracks 1–4. o Switch 3: Press Switch 3 to select Clip Mode (described above), allowing you to launch clips for Tracks 5–8. o Switch 4: Press Switch 4 to select Scene Mode (described above). o Switches 5–7: No function. o Switch 8: Press Switch 8 to to turn notifications on or off. When on, a small message will appear when you adjust a control, enter another mode, etc. • Control Bank B: Press the switches to record-arm or -disarm the tracks. Each switch corresponds to the track with the same number (e.g., Switch 1 record-arms or -disarms Track 1, Switch 2 record-arms or -disarms Track 2, etc.). Press and hold Shift on your computer keyboard, and then press one of the switches to select the track with the same number (e.g., Switch 1 selects Track 1, Switch 2 selects Track 2, etc.). • Control Bank C: Press the switches to mute or unmute the tracks. Each switch corresponds to the track with the same number (e.g., Switch 1 mutes or unmutes Track 1, Switch 2 mutes or unmutes Track 2, etc.). Press and hold Shift on your computer keyboard, and then press the switches to solo or unsolo the tracks. Each switch corresponds to the track with the same number (e.g., Switch 1 solos or unsolos Track 1, Switch 2 solos or unsolos Track 2, etc.). Press Ctrl Bank to cycle through the control banks.

• Up (∧): Press this button to shift the “clip window” up by one scene. (The clip window is the 4x4 area of clips you can launch with the pads in Clip Mode.) • Down (∨): Press this button to shift the “clip window” down by one scene. (The clip window is the 4x4 area of clips you can launch with the pads in Clip Mode.) • Left (>): Press this button to select the previous device in the active track’s device chain. • Right (<): Press this button to select the next device in the active track’s device chain.

Akai Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. Bitwig Studio is a registered trademark of Bitwig GmbH, registered in the U.S. and other countries. Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. All other product or company names are trademarks or registered trademarks of their respective owners.