Christie Roadster Instruction Sheet
Text of the manual
Boresight Alignment Procedure Instruction Sheet
1 of 3
020-100116-01 Rev. 1 (11/07)
Boresight Alignment Procedure
Instruction Sheet
INTRODUCTION
The following instructions outline Boresight Adjustment on any Roadster, Mirage, Matrix, DLV,
Christie DS and Christie DW model projector.
Boresight alignment ensures the projection lens is precisely parallel with t
2 of 3
Boresight Alignment Procedure Instruction Sheet
020-100116-01 Rev. 1 (11/07)
INSTRUCTIONS
NOTE: For DLV1400-DX and DLV1920-DX models, refer to Boresight Alignment for Fixed Lens
Mount Models, on page 3.
1.
Set the spacing behind screws 1a, 2a, 3a and 4a
to 4mm. Refer to Figure 1.
2.
Load the “GRID” internal test pattern (Figure
2).
3.
Using the IR
Boresight Alignment Procedure Instruction Sheet
3 of 3
020-100116-01 Rev. 1 (11/07)
You are now ready to perform a precision boresight alignment on the projector to achieve the best
possible uniform focus.
1.
Back off each corner locking screw (1b, 2b, 3b, & 4b) - refer to Figure 1).
2.
Observe which portion of the image is out of focus. For example if the t
