BAC FXV Rigging & Assembly Instructions
Text of the manual
Crossflow coil products should be rigged and
assembled as outlined in this bulletin.
These�procedures�should�be�thoroughly�reviewed�prior�to�the�
actual�rigging�and�assembly�of�the�equipment�to�acquaint�
all�personnel�with�procedures�to�be�followed�and�to�ensure�
that�all�necessary�equipment�wil
Table of Contents
RIGGING & ASSEMBLY INSTRUCTIONS » CROSSFLOW COIL PRODUCTS
1
Introduction
3
Safety
3
Shipping
3
Pre-rigging Checks
4
Cold Weather Operation
4
Location
4
Warranties
2
Unit Rigging & Assembly
4
Rigging
5
Section Assembly of Two-Piece Cells
6
Section Assembly of Optional Three-Piece Cells
7
Section Assembly of Four-Piece Cells
11
ENDURADRIVE®
CROSSFLOW COIL PRODUCTS
Introduction
1
Safety
Adequate�precautions�appropriate�for�the�installation�and�location�of�these�products�should�
be�taken�to�safeguard�the�equipment�and�the�premises�from�damage�and�the�public�from�
possible�injury.�The procedures listed in this man
WWW.BALTIMOREAIRCOIL.COM
3
Unit Weights
Before�rigging�any�unit,�the�weight�of�each�section�should�be�verified�from�the�unit�certified�
drawing.�Unit�print�weights�include�the�final�assembled�unit�with�all�accessories.�Accessory�
weights�(found�on�the�respective�drawing)�can�be�deducte
