Orion LB2000 Instruction Manual

: TV Channel (Program) This menu is possible to select, Input Source must be set ‘TV’. : Auto Search Find available channels(Program) and save automatically. : Fine Tuning Adjust a mismatch between real and programmed channel(Program). : Store / Clear Select “Store” to save the channel(Program) or select “Clear” to remove the channel(Program). : TV Type (NTSC Only) Select Air or Cable TV system. : Channel(Program) Swap (PAL or SECAM Only) Change current channel number to new channel number user want to change(Channel number will be different with real channel ...

EQUIPMENT CCAAUUTTIIOONN Be sure to turn off the power of your computer before connecting the monitor. 1. CONNECT THE VIDEO SIGNAL CABLE A. Connect one end of the signal cable to the back panel of the monitor and connect the other end to the graphic card on back of the computer. B. Secure the connection with the screws on the plug. 2. CONNECT THE POWER CORD Connect the female end of the power cord to the power input receptacle on the LCD Monitor. Then, plug the male end of the power cord to an AC outlet or computer. 3. CONNECT THE A/V CABLE A. Con ...

: OSD : H. Position Move the OSD position to right( ) or left( ). : V. Position Move the OSD position to up( ) or down( ). : Transparency Select the OSD background. : OSD Timer Select the OSD display timing. : Language Select a language among English, Français, Deutsch, Español, Danish, Italiano. INSTRUCTION MANUAL 12 ...

VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system. POWER CONSUMPTION LED INDICATOR The power management feature of the monitor is comprised of four stages : On(Green), Standby, Suspend, Active off(Amber) and Unsupported mode(Gr ...