Qtx PAR100 Operation & User’s Manual

PAR100 3in1 LED PAR Can Item ref: 151.030UK User Manual Thank you for choosing the PAR100, A lightweight and compact LED PAR Can fitted with 18 3-in-1 RGB LEDs. This unit can be controlled by auto, sound-to-light, master/slave programs or via DMX. A great value solution for background wash illumination. In the box: Your PAR100 should arrive with you in a single carton in good condition. The carton should contain 1 x main unit with bracket and screws, 1x remote control, 1 x UK IEC mains lead and 1 x manual. Warning: To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use. Please read through this manual thoroughly before use, any damage Caused by misuse of product will not be covered by warranty. Please do not open cover, contains high voltage. This product is not serviceable or repairable by the end user. Please refer to qualified personnel for service and repair.

Placement: • Use the included mounting bracket to fix to a stand or lighting truss • Keep away from damp or dusty environments • Ensure adequate airflow around the fixture housings • Ensure adequate access to controls and connections Cleaning: • Use a soft cloth with a neutral detergent to clean the casing as required • Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups • Do not use strong solvents for cleaning the unit Rear panel controls: 1. Manual control buttons 2. DMX Signal in 3. DMX signal out 4. LED display 5. IEC power in (fused) 6. IEC power out Manual control menu: Press the “MENU” button to enter the settings menu. Press “UP” and “DOWN” buttons to navigate through various setting functions. Press “ENTER” button to save the desired setting. Menu Number range Function and description A001 A001-A512 DMX512 address settings ADYE ADYE or ADno DMX512 Master on or off (Slave) rEYE rEYE or REno Remote control on or off AU01 AU01-AU07 Manual colour selection 2. 3. 4. 5. 6. 1.

FF00 FF00-FF99 Colour jump setting (speed slow to fast) EE00 EE00-EE99 Colour fade setting (speed slow to fast) CC00 CC00-CC99 Colour pulse setting (speed slow to fast) F000 F000-F255 Strobe setting (speed slow to fast) SOUD SOUD Sound to light white strobe setting SUND SUND Sound to light colour change setting r000 r000-r255 Red dimming (0-100%) G000 G000-G255 Green dimming (0-100%) b000 b000-B255 Blue dimming (0-100%) Remote control: The PAR100 is supplied with an I.R. remote control for quick access to most of the basic functions of the unit. This must be aimed at the front of the unit where there is a remote receiver and has a maximum range of approximately 4-5m. Controls and functions are listed on the diagram below: DMX mode: The PAR100 can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct start address by using the “UP” and “DOWN” buttons and “ENTER” to confirm. This unit has 7 DMX channels as indicated in the table below: Channel Value Function Setting CH1 0-255 Master dimming (0-100%) Available in all modes CH2 0-255 Red dimming (0-100%) CH3 0-255 Green dimming (0-100%) Dimming modes only CH4 0-255 Blue dimming (0-100%) CH5 0-255 Strobe (speed slow to fast) Available in all modes CH6 0-50 Open CH1-CH5 51-100 Colour select 101-150 Colour jump setting 1. Power = Remote on/off 2. Auto = Colour jump open/off 3. Mode = Colour fade open/off 4. Flash = Strobe open/off 5. -- = Decrease option setting 6. R = Red open/off 7. G = Green open/off 8. Enter = Save option setting 9. Music = Sound to light colour change open/off 10. Motor = Manual colour select 11. + = Increase option setting 12. Dmx = DMX512 open/off 13. B = Blue open/off 14. W = No function on this model (achieve white by opening red, green and blue concurrently) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

CH6 (cont’d) 151-200 Colour fade setting 201-250 Colour pulse setting 251-255 Open sound to light setting CH7 0-255 Speed from slow to fast Available in all modes Specifications: Power supply 110-240Vac, 50/60Hz (IEC) Power consumption 35W Fuse rating T1.0A LED quantity 18 x 1.5W 3-in-1 DMX channels 7 Illuminance 1700lux @ 2m Beam angle 25° Projection distance 10m (approx.) Dimensions 200x200x78mm (without Bracket) Weight 1.17kg Troubleshooting: No power (mains) Check mains voltage is correct, and outlet is switched on Check IEC lead and fuse (if fuse continually blows, refer to your dealer) No light output Check control panel mode settings Check DMX settings from controller (dimmer levels, blackout etc.) Unresponsive to DMX Check that unit is in DMX mode and ensure DMX address remains lit to confirm receiving DMX signal Check DMX controller is not set to black out Check DMX controller is on correct fixture/page Check master dimmer value Check correct DMX address is set Check DMX connection and leads Overheating/ cutting out Ensure adequate ventilation and unit is not too close to a heat source This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines. Errors and omissions excepted. Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House, Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.