Qlightec SHD Operating Manual

Thank you for purchasing Q.Light product. Please read this manual carefully before installing this system for safe and long use of the product. ▪ Aluminum housing product with high durability. ▪ Signal sound built-in product of self-standing type with warning light and phone integrated. This structure can transmit both visual signal and auditory signal at same time. ▪ Material : Lens-PC, Body-DIECAST AL, Horn Housing-SUS316L, Reflector-Heat Resisting ABS, Protection Cage(Option)-SUS316L ▪ RPM : 120-140/Min.(Controllable) ▪ Protection Class : IP56 ▪ Volume : SHD 113-118dB(1m), SHD2 113-118dB x 2(1m) 1) SHD ▪ Product Specification Model Rated Voltage Current Bulb Weight Color DC12V 2.240A 12V15W G23 15S 17 DC24V 1.440A 24V15W G23 15S 18 3.18Kg AC110V 0.321A 12V15W G23 15S 17 SHD AC220V 0.156A 12V15W G23 15S 17 3.89Kg Red-R Amber-A Green-G Blue-B ▪ External View Drawing 2) SHD2 ▪ Product Specification Model Rated Voltage Current Bulb Weight Color DC12V 3.270A 12V15W G23 15S 17 DC24V 2.130A 24V15W G23 15S 18 4.23Kg AC110V 0.514A 12V15W G23 15S 17 SHD2 AC220V 0.273A 12V15W G23 15S 17 4.95Kg Red-R Amber-A Green-G Blue-B ▪ External View Drawing Type Main Built-in Sound CH Sound Tone Volume WS 5 Warning Sounds ch1 ch2 ch3 ch4 ch5 Fire A-ANG(Wail) Emergency WA-U(Yelp) Ambulance PI-PO(High-Low) Machinery Fault( PI-PI-PI-) Foam Release Alarm (PI~Continuous) 118dB (SHD) 118dB x 2 (SHD2) WP 5 Special Warning Sounds ch1 ch2 ch3 ch4 ch5 Fire A-ANG(Wail) Abandon Alarm Machinery Fault(PI-PI-PI-) Foam Release Alarm (PI~Continuous) General Alarm (Long PI~+ 7 Short PI.) 118dB (SHD) 118dB x 2 (SHD2) WM 5 Melodies ch1 ch2 ch3 ch4 ch5 Sweet Home For Elise Cuckoo’s Waltz Piano Sonata Turkish March 118dB (SHD) 118dB x 2 (SHD2) WA 5 Alarms ch1 ch2 ch3 ch4 ch5 Beep(Intermittent) Door Chime Phone Ring Machinery Fault(PI PI PI PI.) Tripping Bead Sound 116dB (SHD) 116dB x 2 (SHD2) WV 3 Voice Signals ch1 ch2 ch3 Reproduction of Voice Recording 3 Channels 113dB(SHD) 113dB x 2 (SHD2) OPERATING MANUAL Heavy Duty Bulb Revolving Light with Phone ООО “РусАвтоматизация” 454010 Челябинск, Гагарина 5, русавтоматизация.рф Россия, тел. 8 800 775 09 57 , +7(351)799 54 26, тел./факс +7(351)211 64 57 (звонок бесплатный) , [email protected], www.rusautomation.ru,

voltage selection switch(2) on assembling board. Refer to above structure drawing together with below drawing and explanation for right operating. 1) Lens(Protection Cage) Removal Remove Protection Cage② and Lens③ from the product by loosening bolt(M4-4EA)① and make sure assembling board④. 2) Revolving Speed Control ▪ The volume(1) for revolving speed control is built-in this product. Turn it closckwise for increasing revolving speed and turn it counterclockwise for decreasing revolving speed. ▪ If give excess power to the volume, it can be broken. Be careful ! 3) Bulb Change ※ Warning ! ! Turn off Power Must turn off power supply and change the bulb after at least 1 minute. ▪ Make sure the rated voltage and wattage of new bulb. If the voltage of new bulb is higher than that of original bulb, the self-life of product can be reduced and can cause damage on lens and reflector. Therefore, please use same bulb as original one which has same rated voltage and wattage or lower one. ▪ Bulb Removal : Press slightly the bulb downward and turn it counterclockwise for removing. ▪ Bulb Fitting : Fit new bulb into the socket by pressing it clockwise. Bulb Removing Bulb Fitting 4) Lens(Protection Cage) Assembling Assemble the lens(or Lens and Protection Cage) in reverse order of separating. Refer to structure drawing together with below drawing and explanation for right operating. 1) Body Cover Removal ▪ Remove body cover⑥ by loosening body cover bolt(M5 4EA)⑤ and make sure related parts on phone control board. 2) Sound Tone Selection ▪ 5 Warning sound tones are built-in this product. In case of standard product, select preferable sound tone by using internal sound tone selection switch(S1). ▪ In case of LC Type(Custom-Made) product,refer to below explanation and drawing. 3) Volume(dB) Control ▪ Volume controller(S2) is built-in this product. Turn it clockwise for increasing volume or turn it counterclockwise for decreasing volume 4) Wiring Power Line ▪ Make sure terminal plate⑦ inside the body of the product. ▪ Treat the end of power cable by using “O” or “U” type terminal for safe wiring. ▪ Connect power cable to terminal plate. ▪ In case of product using AC voltage, connect the line without polarity(wire color). ▪ In case of product using DC voltage, black line is negative(-). ООО “РусАвтоматизация” 454010 Челябинск, Гагарина 5, русавтоматизация.рф Россия, тел. 8 800 775 09 57 , +7(351)799 54 26, тел./факс +7(351)211 64 57 (звонок бесплатный) , [email protected], www.rusautomation.ru,

▪ Keep the tightness of power entry⑧ by using water-proof connector(flexible connector #16 is supplied as a standard specification) or cable grand. ▪ Product can be damaged by water or dust if the cable entry is exposed outdoor without airtightening. 6) Body Cover Assembling Assemble the body cover in reverse order of separating. ■ Wiring for LC(External Contact) Type – Custome Made ▪ In case of LC type which selets sound tone by external contact, power line and signal line come out. Connect each line as below. ▪ Power Line : UL1015-NO.16(1.25sq) x 2C 400mm ▪ Signal Line : UL1007-NO.22(0.3sq) 400mm ▪ In case of product using AC voltage, do not allow power supply either to common line or to signal line.. ▪ This product is water-proof and anti-corrosion type for outdoor use. But, install with vertical direction at a place or machine where exists no big vibration and no strong impact as long as possible. ▪ Refer to below information and drill necessary mounting holes on profitable part of the product. (Make sure PCD from external view drawing.) ▪ Fix the product by using mounting bolt(M8-4EA). ▪ This product is explosion-proof, water-proof and anti-corrosion type. When separate and assemble the product for wiring, repair or check, keep the airtightnees of the product by tightening each bolt and nut. ▪ If using voltage is seriously higher or lower than rated voltage, it can reduce the self-life of the product or can cause a problem on product operating. Make sure the using voltage does not exceed +/- 5% of the rated voltage. ▪ If lens or body of the product is contaminated by chemicals such as thinner, benzene, the product can be damaged, discolored or deformed. Please be careful. ▪ Keep airtightness of cable entry by using water-proof cable grand or water-proof connector. Product can be damaged by water or dust if the cable entry is exposed outdoor without airtightening ▪ Do not give strong impact to the product. It can be a reason of part(s) damage or short circuit. ▪ Do not strongly pull the wire out from the product. It can cause a disorder. Situation Main Cause Solution Non Lighting Wire Disconnection with Bulb Wire Re-connection or Bulb Change Supplying Voltage Lower Than Rated Voltage Making Sure Using Voltage Wrong Selecting Voltage Selection Switch to 220V (In Case of AC Type) Selecting Voltage Selection Switch to 110V Feeble Lighting Low Revolving Speed Sound Tone Deter orat on Wrong Operating Revolving Speed Control Volume Turn the Volume Clockwise Short Self-Life of Bulb Supplying Voltage Higher than Rated Voltage Making Sure Using Voltage Lens Deformation Caused by Bulb Overheating Damage on Transformer (AC Type) The Voltage of Bulb is Higher than Rated Voltage Changing Bulb with Rated Voltage Non Revolving Problem with Motor Contact Q.Light or Their Agent Higher dB than Standard Supplying Voltage Higher than Rated Voltage Making Sure Using Voltage Short Circuit of Sound Tone Signal Line Making Sure Wiring Double Sound Tone Problem with Sound Tone Selection Switch Contact Q.Light or Their Agent Wrong Wiring Making Sure Wiring No Power Supply Making Sure Wiring No Sound Problem with Horn Contact Q.Light or Their Agent Q-LIGHT CO., LTD. http://www.qlightkr.com E-mail : [email protected] Seoul Office (Domestic Sales & A/S) Tel) 02-2679-6152 Ansung BD A-312, 410-13 Sindorim-Dong, Guro-Gu, Seoul Overseas Marketing Team / Plant Tel) 055-328-4082 Fax) 055-328-4083 Plant #1 : 178-1 Woogye-Ri, Sangdong-Myun, Kimhae-Si, KyungNam, Korea Plant #2 : 417-1 Geumsa-Dong, Geumjung-Gu, Busan ООО “РусАвтоматизация” 454010 Челябинск, Гагарина 5, русавтоматизация.рф Россия, тел. 8 800 775 09 57 , +7(351)799 54 26, тел./факс +7(351)211 64 57 (звонок бесплатный) , [email protected], www.rusautomation.ru,