Nytech ND-4000 Manual 

Note: * If the “CARD COVER LOCK IS RELEASED” message appears on the LCD monitor, please check the battery cover lock. Make sure it is locked in the direction of the Lock arrow. * If you will not be using the batteries for an extended period of time, remove them from the camera to prevent leakage or corrosion. * Never use manganese batteries. * Never use batteries of different type (together) or mix old and new batteries. * Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce camera performance. Using an AC Power Adapter (op ...

Transferring Recorded Images/Video Clips to Your Computer To transfer images/video clips from the camera to your computer, follow these steps: Step 1: Installing the USB driver Step 2: Connecting the camera to your computer Step 3: Downloading images/video clips System Requirements (Windows) Pentium 166 MHz or higher Windows 98/98SE/Me/2000/XP 32MB (64MB RAM recommended) 128 MB hard disk space CD-ROM drive An available USB port System Requirements (Macintosh) PowerPC G3/G4 OS 8.6 or later 32MB (64MB RAM recommended) 128 MB hard disk space CD-ROM drive An available USB port ...

Mode Dial � Setup mode � PC mode � Playback mode � Record mode � Manual record mode � Movie mode Mode Description Setup mode Use this mode to choose your preferences on the camera’s settings. PC mode Use this mode to transfer images to a computer. Playback mode Use this mode to view your images/video clips. Slide show or thumbnail display for recorded images is also available in this mode. Record mode Use this mode to take still images. Manual record mode Use this mode to take still images by manually adjusting camera settings such as white balance, exposure, aperture ...

Erasing Folders (All Images in a Folder/All Folders) Erase selected folders and all contents currently recorded to the SD memory card loaded on the your camera. There are two ways of erasing images, by individual folders or by the all folders. The folder to be erased differs according to the position of the mode dial. In mode: Folder of images currently being played back. In , , or mode: Folder of images currently being photographed. Set the mode dial to the , , or mode. Set the mode dial to the type of folder you want to erase. Press the button for two seconds. Press the or butto ...

Setting the Image Resolution and Quality The resolution and quality settings determine the size and the compression ratio of your images and how many images can be stored on the SD memory card. The higher resolution and quality produce the large size and less compressed image but take up more space in memory. Higher resolution and quality are recommended if you want to enlarge images. Lower resolution and quality take up less memory space, suitable for sharing images via e-mail or the Internet. To change image resolution(size) and quality as follows: In the , or mode: Press the MENU b ...

SOUND Camera sounds each time you press the camera button if this function is enabled. ON: Sound the beep tone according to the operating state or operation OFF: Does not sound the beep tone in any state Choose the desired selection by using the or button, and press the ENTER button. TIME & DATE Set the date and time. Press the or button to select the item to set, and press the or button to set the value for each item. Press the ENTER button when OK is selected, date and time data is updated. OSD LANGUAGE Set the on-screen display language. ENGLISH, JAPANESE, FRANÇAIS, DEUTSCH, S ...

Thread the small loop of the hand strap through the strap eyelet on the camera. Pull the large loop through the small loop until the strap is firmly secured. Attaching the Hand Strap To prevent accidental dropping of the camera, always use the strap. Attach the hand strap as follows: ...