Panasonic ET-RFE16 Operating Instructions Manual
Read Online
Read the Panasonic ET-RFE16 Operating Instructions Manual online using the built-in PDF viewer.
Text of the manual
Model No. ET-RFE16
交換用フィルター 業務用
Operating Instructions
取扱説明書
Replacement filter Commercial Use
Thank you for purchasing this Panasonic product.
■ Before using this product, please read the instructions completely and save this manual for
future use.
ENGLISH
日本語
DPQX1616ZA/X1
1) Turn off the power and remove the power plug from the outlet.
When turning off the power, make sure to follow the procedures of “Powering off the projector” described in
the operating instructions of the projector.
2)
Use a Phillips screwdriver to turn the screws counterclockwise until they turn freely, and then remove the
unit.
Screw
3) Remove the holder.
Loosen the three screws on the holder (A, B), slide the holder in the direction shown by the arrow in the
image, and lift up to remove the holder.
Holder B
Holder A
Screw
4)
.
5)
The side with the sponge must be the top. Attaching it with the wrong side up or forcing it to attach will
6) Attach the holder.
Slide the holder so that its arrows line up with the arrows on the unit, and attach the holder.
Tighten the three holder screws.
7)
Perform step 2) in the reverse order.
8) Connect the power plug to the outlet, turn on the power, and then perform [Filter
counter reset].
For details, refer to “Resetting the value of [Filter counter]” ( page ENGLISH-2).
Replacement of the air filter
Pull out the air filter unit.
Remove the air filter.
Hook your fingers in the slot to lift up and remove the air filter.
Attach the new air filter.
Inserting the new air filter by slowly sliding it will make it easier to attach.
cause the air to leak in. The air filter does not work fully and as a result, dust will get into the projector.
Place the holder (A, B) on top of the filter.
Attach the air filter unit to the projector.
When attaching the unit, make sure that the projector is stable. Perform the attachment in a safe place where
safety.
projecting.
Resetting the value of [Filter counter]
1) On the menu screen, select [Setting] from the main menu.
2) Press the
Environment care information for users in China
Product information (for Turkey only)
This symbol is only valid in China.
AEEE Yönetmeliğine Uygundur
ホルダー(A、B)のねじを 3 本ゆるめ、図の矢印の方向へずらしてから上に持ち上げると、ホルダーを
取り外せます。
ホルダー B
ホルダー A
ねじ
4) エアフィルターを取り外す
溝に指をかけ、エアフィルターを持ち上げるようにして取り外します。
5) 新しいエアフィルターを取り付ける
そっと奥へ押しつけるようにしながら入れるとはめ込みやすくなります。
スポンジがついている方が上です。逆に取り付けたり、無理に入れたりしようとすると気密性が悪くなり
ます。エアフィルターの性能が十分に発揮できなくなり、空気中のほこりが機器内部に流入します。
6) ホルダーを取り付ける
ホルダー(A、B)をフィルターの上に載せます。
ホルダーの矢印が、ユニット本体にある矢印と位置が揃うようにずらして、取り付けます。
ホルダーのねじを 3 本締めます。
7) エアフィルターユニットをプロジェクター本体に取り付ける
手順 2)の逆の手順で取り付けてください。
8) 電源プラグをコンセントに接続し、プロジェクター本体の電源を入れ、[フィルターカウ
ンターリセット]を行う
詳しくは、[フィルターカウンター]の値をリセットする (☞ 日本語 -2 ページ)をご覧ください。
エアフィルターの交換手順
お 願 い
取り付けに際しては、必ずプロジェクター本体の安定を確保して、エアフィルターユニットが落下しても安全
な場所で実施してください。
エアフィルターの交換後、フィルターカウンターをリセットしないと安全のため電源が切れるおそれがありま
す。
エアフィルターユニット取り付け後、必ずねじを締めてください。使用中にエアフィルターユニットが落下す
るおそれがあります。
[フィルターカウンター]の値をリセットする
フィルターの交換後は、必ずカウンターをリセットしてください。
1) メニュー画面で、メインメニューから[設定]を選択する
2) 〈SELECT〉ボタンを押す
サブメニューが表示されます。
3) ▲▼ボタンで[フィルターカウンター]を選択する
4) 〈SELECT〉ボタンを押す
サブメニュー 2 が表示されます。
5) ▲▼ボタンで[フィルターカウンターリセット]を選択する
6) 〈SELECT〉ボタンを押す
リセットを行うかどうかの確認画面が表示されます。
7) [はい]を選択し、〈SELECT〉ボタンを押す
確認画面が表示されます。
8) [はい]を選択し、〈SELECT〉ボタンを押す
お知らせ
フィルターを交換したときのみ、リセットをしてください。
リセットすると[フィルター警告]の表示が消えます。
日本語 -3
日本語
■中国域内での環境に関する情報
このシンボルマークは中国国内でのみ有効です。
〒 571-8503 大阪府門真市松葉町2番 15 号 電話 0120-872-601
© Panasonic Connect Co., Ltd. 2022
Panasonic Connect Co., Ltd.
Web Site : https://panasonic.net/cns/projector/
SS0811AM1042-PS
Printed in Japan