PaloAlto Networks PA-3400 Series Hardware Reference Manual

Replace a PA-3400 Series Drive The PA-3400 Series firewalls use a single solid-state drive (SSD) to store the PAN-OS system files, system logs, and network traffic logs. If this drive fails, you must replace it to restore funconality to the firewall. The replacement drive ships with a factory default PAN-OS image with the default configuraon. Aer you install the new drive, you will need to obtain a backup configuraon that you saved from the failed firewall to restore your configuraon. To avoid injury to yourself or damage to your Palo A ...

STEP 4 | Power on the firewall. See Connect Power to a PA-3400 Series Firewall to learn how to connect power to the firewall. • (Standard mode) Using your terminal emulator, watch for the following CLI prompt as the firewall boots: Do you want to exit ZTP mode and configure your firewall in standard mode (yes/no)[no]? Enter yes. The system will then ask you to confirm. Enter yes again to boot in standard mode. If you miss the above CLI prompt, you can also change your boot mode using the web interface. Go to the firewall login screen at any po ...

PA-3400 Series Environmental Specificaons The following table describes PA-3400 Series firewall environmental specificaons. Specificaon Value Operang temperature range 32ºF to 104ºF (0ºC to 40ºC) Non-operang temperature -4ºF to 158ºF (-20ºC to 70ºC) Humidity tolerance (non-condensing) Operang and non-operang relave humidity—10% to 90% Airflow Front-to-back Maximum BTU/hr 819BTU/hr Electromagnec Interference (EMI) FCC Class A, CE Class A, VCCI Class A Acousc noise • Average—51 dB(A) • Maximum—65 dB(A) ...

PA-3400 Series Electrical Specificaons The following table describes PA-3400 Series firewall electrical specificaons. The electrical specificaons are the same for all models in the series. Specificaon Value Power Supplies Two 450W AC power supplies; the second power supply is for redundancy. Input voltage • 100-240VAC (50-60Hz) Power consumpon • Maximum—240W • Average—195W Maximum current consumpon 2A@100VAC, 0.83A@240VAC Maximum inrush current 25A PA-3400 Series Next-Gen Firewall Hardware Reference 43 ©2022 Palo Alto N ...

PA-3400 Series Next-Gen Firewall Hardware Reference 32 ©2022 Palo Alto Networks, Inc. ...

Install the PA-3400 Series Firewall Using the Four-Post Rack Kit The following procedure describes how to install the PA-3400 Series firewall in a 19” four-post equipment rack using the four-post rack kit (PAN-PA-1RU-RACK4). STEP 1 | Aach one rack-mount bracket to each side of the firewall in the front-mount posion using four #6-32 x 5/16” screws for each bracket and torque to 9 in-lbs. PA-3400 Series Next-Gen Firewall Hardware Reference 22 ©2022 Palo Alto Networks, Inc. ...

3000 Tannery Way Santa Clara, CA 95054 www.paloaltonetworks.com/company/contact-support.html About the Documentaon • For the most recent version of this guide or for access to related documentaon, visit the Technical Documentaon portal docs.paloaltonetworks.com. • To search for a specific topic, go to our search page docs.paloaltonetworks.com/search.html. • Have feedback or quesons for us? Leave a comment on any page in the portal, or write to us at documenta[email protected]. Copyright Palo Alto Networ ...

screws (#10-32 x 3/4” or #12-24 x 1/2”) for your rack and torque to 25 in-lbs. Use cage nuts to secure the screws if the rack has square holes. PA-3400 Series Next-Gen Firewall Hardware Reference 24 ©2022 Palo Alto Networks, Inc. ...