LTS 5MP Series Operation & User’s Manual

below. Pan Position [0° to 360°] Bracket Adjusting Screw Rotation Position [0° to 360°] Tilt Position [0° to 90°] Figure 2-3 3-Axis Adjustment 2.2 Ceiling/Wall Mounting of Type II Camera Before you start: The ceiling mounting and the wall mounting are similar. Following takes ceiling mounting as an example. Steps: 1. Paste the drill template (supplied) to the place where you want to install the camera. 2. Drill the screw holes according to the drill template, and the cable hole (optional) on the ceiling. Figure 2-4 Drill Template Note: Drill ...

non-water-proof device.  While in delivery, the camera shall be packed in its original packing, or packing of the same texture. Mark Description Table 0-1 Mark Description Mark Description DC Voltage 1 Introduction 1.1 Product Features The main features are as follows:  High performance CMOS sensor  OSD menu with configurable parameters  Smart IR  3-Axis Adjustment 1.2 Overview 1.2.1 Overview of Type I Camera Switch Button Power Cord Video Cable Bracket Main Body Lens Figure 1-1 Overview of Type I Camera Note: Press and hold ...

below. Pan Position [0° to 360°] Bracket Adjusting Screw Rotation Position [0° to 360°] Tilt Position [0° to 90°] Figure 2-3 3-Axis Adjustment 2.2 Ceiling/Wall Mounting of Type II Camera Before you start: The ceiling mounting and the wall mounting are similar. Following takes ceiling mounting as an example. Steps: 1. Paste the drill template (supplied) to the place where you want to install the camera. 2. Drill the screw holes according to the drill template, and the cable hole (optional) on the ceiling. Figure 2-4 Drill Template Note: Drill ...

[0° to 360°]. 2). Loosen screw A to adjust the tilt position [0° to 180°]. 3). Loosen screw B to adjust the rotation position [0° to 360°]. 2.3 Ceiling Mounting of Type III Camera Before you start: The ceiling mounting and the wall mounting are similar. Following takes ceiling mounting as an example. Steps: 1. Paste the drill template (supplied) to the place where you want to install the camera. 2. Drill the screw holes and cable hole (optional) on the ceiling according to the drill template. Drill Template Hole A: for cables routed thr ...