RainPoint TTV203WRF Instruction Manual

M。del: TTV203WRF + TWG004WRF Cust。mer Supp。t US Free H。tline: +1-833-3815659 E- mail: [email protected] Facebook: @Rainpointglobal RAINPOINT ® www.rainpointus.com *SAVE THIS MANUAL FOR FUTURE REFERENCE.

RainPoint is pleased to present the 2 Z。ne WiFi Water Timer with WiFi Hub (M。del: TTV203WRF + TWG004FRF)-a smat sub-zone watering timer system for residential applications. Designed with the needs of the customer in mind, the model offers 2 high flow valves to water separate areas, simplified APP programming and an impressive range of features typically found in WiFi water timers costing twice as much. While it’s affordable, the model is without a doubt a professional grade product. The timer has a large and handsome body, equipped with 2 large manual buttons, an LCD indicator light and a sturdy casing, which is rain-proof and sun-proof, vey suitable for outdoor use. The WiFi hub increas- ing range of garden watering and irrigation control equipment that are controllable via your smatphone in both iOS and Android formats. Whatever your outdoor watering needs, RainPoint provides best-in-class irrigation products to help you more effectively manage and control your watering. Thank you for choosing RainPoint! M。re pr。duct inf。rmati。n and user guide will happen 。n : RainPoint : @Rainpointglobal Have Questi。ns? : 1-833-3815659 : [email protected]

INTRODUCTION 1-4 CONTENTS IN THE BOX 01 PRODUCTS OVERVIEW 02 TTV203WRF 2 Z。ne WiFi Water Timer TWG004FRF WiFi Hub FEATURES OVERVIEW 04 INSTALLATION 5-10 STEP 1. INSTALL APP ON YOUR PHONE 05 STEP 2. CONNECT THE WIFI HUB 06 STEP 3. CONNECT THE WIFI TIMER 07 STEP 4. INSTALL THE WIFI TIMER 09 STEP 5. TEST BEFORE USE 10 APP PROGRAMMING 11-21 WIFI SOCKET 17 Manual Power ON/OFF Power ON/OFF By Schedule SMART AUTOMATION 18 Automation & Tap-to-Run How to set the automatic rain delay? HOME MANAGEMENT 21 RESET THE DEVICE 22 TROUBLESHOOTING 23 WARRANTY 25 CUSTOMER SUPPORT 25 APP HOME SCREEN 11 2 ZONE WIFI IRRIGATION TIMER 12 Device Parameter Manual Watering Watering Plan & Manual Rain Delay WiFi Soil Sensor & Water Flow Meter* *WiFi soil sensor is sold separately, this kit does not contain WiFi s。il sens。r

A. 1 x TTV203WRF 2 Zone WiFi Water Timer B. 1 x TWG004WRF WiFi Hub C. 1 x Instruction Manual D. 1 x Quick Setup Guide A B C D FCC N。tice: This device generates radio frequency energy and may cause inteference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Pat 15 of FCC Rules, which are designed to provide reasonable protection against such inteference in a residential installation. However, there is no guarantee that inteference will not occur in a paticular installation. If this equipment does cause inteference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to ty to correct the inteference by one or more of the following measures: • Reorient the receiving antenna • Move the device away from the receiver • Plug the device into a different outlet so that device and receiver are on different branch circuits. If necessay, the user should consult the dealer or an experienced radio/television technician for additional suggestions. - 01 -

Left Zone Button Right Zone Button Right Zone Watering Indicator Left Zone Watering Indicator Right Water Outlet Left Water Outlet Water Inlet Battey Compatment Specificati。n Range Between WiFi Hub and Timer: 160 ft in the open area without inteference Working Water Pressure : 0.5 bar to 8 bar(7.25-116.03PSI) Temperature Operating Range : 1。C - 50。C (33.8。F-122。F ) Power By : 4 AA alkaline batteries (not included) WaterProof : IP54 For outdoor use with cold water only. Keep away from freezing. In freezing weather, the timer should be placed indoors. Used up or dead batteries must be removed from the timer and disposed of properly. - 02 -

Hub Button Power Indicator WiFi Socket with Power Power Plug Specificati。n Range Between WiFi Hub and Router: 160 ft in the open area without inteference Temperature Operating Range: 1。C - 50。C (33.8。F-122。F ) WiFi Frequency Band: 2.4Ghz Only Input: 220-240V 、 50Hz 、16A For Indoor Use Only Only applicable to 2.4Ghz WiFi. If your router is a dual-band router, please independently enable the 2.4GHz WiFi band and name it differently from the 5GHz WiFi band. - 03 -

2) 2 Water Outlets: Watering schedules can be set independently in different zones. 3 ) WiFi S。cket: The WiFi Hub can be use as WiFi socket. 4) Manual Watering: Manually turn on/off watering and set watering time. 5) Watering 。n Schedule: Each zone can set up to 3 separate watering programs per day. Each watering programs has different stat time and watering duration. 6) Aut。matic Watering: ① When the WiFi timer is connected to the WiFi soil sensor (not included), it can automatically irrigate or stop according to the soil temperature and humidity data; ② When you locate the home address for the timer, the APP will automatically synchronize the local weather information, and the timer can be automatically executed according to the weather trigger conditions you set. 7) Rain Delay: Manual Rain Delay and Automatic Rain Delay 8) Water Fl。w Meter: Built-in water flow meter to track water usage in the last 10 days. 9) Tw。 Watering M。des: Irrigation mode and Mist mode. 10) C。-management with family: Home Management allows you to Add family members and give them permissions, manage the irrigation of your home garden together. 11) L。w Battey and Water Leak Alarm: APP will send you alet messages when low battey or product failure. 12) One WiFi hub can pair with maximum 4 WiFi water timers. One WiFi water timer can pair with 2 WiFi soil sensor. * Only compatible with Rainpoint TCS005FRF Wi-Fi soil sensor (not included). * Only applicable to 2.4Ghz WiFi - 04 -

or FAQ to install the device quickly and easily. Setup Vide。: www.rainpointus.com/pages/playlist FAQ: www.rainpointus.com/downloads/faq Setup Video FAQ STEP 1. INSTALL APP ON YOUR PHONE Rainpoint 1. D。wnl。ad the RainP。int App Search for ”RainPoint” on Google Play or App Store or scan the QR code to download the Rainpoint APP. 2. Register y。ur RainP。int acc。unt Open your RainPoint APP, select Set Up Follow the prompts to register a RainPoint account with your email or mobile number. N。te: Ensure your county/region details are correct at this stage. You may be prompted to allow access your location. This allows the app to show weather information, and can still function if you choose to opt out. - 05 -

1. Plug y。ur WiFi Hub t。 an ind。。r p。wer s。urce near your WiFi router and the outdoor outdoor location of your timer. 2. Open RainPoint App and tap ”Add device” or ” ” to add a new device. 3. Tap ”Smat lrrigati。n” and ”Add Manually”, then select ”Irrigati。n Hub” 4. select 2.4Ghz WiFi, and enter the password. Tips: If your router is a dual-band router, and you cannot identify the 2.4Ghz or 5Ghz WiFi, please tap the blue words ”C。mm。n r。uter setting meth。d” to name the 2.4Ghz WiFi differently, then you can select it individually. - 06 -

per sec。nd). Then select ”c。nfirm indicat。r rapidly blink” and tap Next. The APP will search and pair your WiFi hub automatically. N。te: If the indicator doesn’t blink rapidly (2 times per second), please tap ”Resetting Devices” and follow the prompts (Or refer to the ”RESET THE DEVICE” secti。n of this manual) to reset the WiFi hub and make the hub indicator blink rapidly. 6. After the connection is successful, the color icon of irrigation hub will be displayed on the APP home screen. STEP 3. CONNECT THE WIFI TIMER 1. Inset 4 new AA alkaline batteries into the battey compatment of the timer. Replace the battey cover and make cetain it is secured. WARNING: *Please use only alkaline batteries. *Do not mix old and new batteries. *Batteries are to be inseted with the correct polarity. *Exhausted batteries are to be removed from the product. *Please remove the battey from long-term no use. - 07 -

” to add the WiFi timer. 3. Tap ”Smat lrrigati。n” and ”Add Manually”, then select ”WlFl 2-Z。ne Smat Water Timer” 4. Press and hold the left butt。n on the timer until the left and right indicators blink rapidly at the same time (2 times per sec。nd). Then select ”confirm indicator rapidly blink” and tap Next. The APP will search and pair your WiFi timer automatically. N。te: If the indicators don’t blink rapidly (2 times per second), please swipe the page and tap ”Resetting Devices” and follow the prompts (Or refer to the ”RESET THE DEVICE” section of this manual) to reset the WiFi timer and make the timer indicators blink rapidly. 5. After the connection is successful, the color icons of WiFi timer and WiFi socket will be displayed on the APP home screen. Tips: If necessay, three additi。nal WiFi timers can be added t。 the RainP。int APP thr。ugh a WiFi hub. A separate WiFi timer is available on Amazon. - 08 -

Timer Inlet 160 feets (No bushes, walls blocking) Timer Outlet 1. Attach the timer inlet to the outdoor faucet/spigot (hand tighten only). From the timer outlet connect a drip irrigation system or a garden hose. WARNING: * The WiFi timer can only be used for cold water. * The WiFi timer uses a 433mHz RF connection to communicate with the WiFi Hub, and must be within a 160ft range, line of sight, of the WiFi Hub. lf there are walls, ir。n gates 。r bushes bl。cking, please sh。ten the distance between them t。 better receive the signal. * Soil will absorb WiFi and RF signals, the best l。cati。n 。f the timer is 。n the faucet 4 t。 8 feet (1.2 t。 2.4 meters) ab。ve the gr。und. * Do not place the WiFi timer in an underground valve box or anywhere your WiFi and RF signal will be obstructed. * Under freezing weather, the water timer should be removed from the tap and placed properly indoor to avoid any danger of freezing. - 09-

C。ngratulati。ns, you have completed the connection and installation of the 2 zone WiFi water timer. Please test whether the internal valve of your water timer is normal before using it. 1. Keep the faucet turned off. 2. Press and hold the left/right zone button of the timer for 3-5 seconds, with a ”click” sound, the left/right zone valve inside the timer opens for manual watering. After a few seconds, press and hold the left/right zone button again, the ”click” will sound again, and the left/right zone valve will close 3. Turn on the faucet a little bit, press and hold the left/right zone button of the timer to check if the water flow out or shut off as expected. If yes, the valve is normall, please use it with confidence! If not, please repeat the above steps several times. The test is 。ver, eveything is n。rmal, please keep the faucet fully turned 。n! N。te: When testing, please keep away from the timer outlet to avoid being splashed and wet. - 10-

L。cal Weather F。recast Get your local weather forecast from website to realize intelligent watering. All Devices A check list of all the devices you have connected. Tap to enter the operation page of devices you have added to program the operation schedule of the device. Smat On the ”Smat” screen, there is ”Tap-to-Run” and ”Automation” functions. You can automate multiple smat products by setting conditions and tasks. H。me Management You can locate your home, customize the home name and add family members. It is convenient for you to manage irrigation schedules for different residences. Add Devices You can add multiple RainPoint devices on the APP to create a smat home irrigation system. R。。m Management Room Management is for indoor automatic irrigation system in different room. Me On the ”Me” screen, there is ”Message Center” and ”FAQ & Feedback” functions. You will receive water leak and low battey alets on ”Message Center”. And you can get FAQ and repot issue on ”FAQ & Feedback”. - 11 -

Tap the 2-Zone WiFi irrigation timer on the all devices list of APP home screen. It will display all the parameters and functions of the timer manually set on the APP. N。te: The WiFi timer will f。ll。w and pef。rm the preset watering schedule after applicati。n set successfully, even if the ph。ne 。r device l。ses netw。rk c。nnecti。n. Device Parameter Device & Third Paty C。ntr。l Tap ” ” on the top right of the screen, you will enter the page for device information and third-paty control. Z。ne 1 / Z。ne 2 Select Zone1 or Zone2, the screen will display the data of the corresponding Zone. Unit Switch Tap ”F/C” switch, it will change the unit (F/C) of soil temperature and the unit (GAL/L) of water usage. Last Water Usage The WiFi water timer has built-in water fow meters, it will display the last water usage on the screen. S。il Temperature & M。isture Paired with the RAINPOINT WiFi soil sensor, it can also display soil temperature and moisture. N。te: * WiFi soil sensor is sold separately. * If the soil moisture is higher than the water prohibition level set on the soil sensor, the background color will change to red. W。rking Status Display the battey level of the timer, the current working mode and the time of the next watering. - 12 -

If you have an Amaz。n Alexa 。r G。。gle Assistant, please tap the icon ” ” in the upper right corner of the device page, select a third-paty voice control device you own, then tap the operation guide, and follow the instructions to connect your WiFi water timer to the voice control device. After successfully connecting, you can control the WiFi water timer by voice. N。te: The WiFi water timer can only peform simple voice commands, such as ”turn on or turn off ”. If you have any questions or suggestions about this feature, please contact our US sevice hotline: +1-833-3815659 or send an email t。 sevice@rainp。intus.c。m Manual Watering Z。ne 1 / Z。ne 2 Select Zone1 or Zone2 for manual watering. Zone 1 controls the left valve of the timer. Zone 2 controls the right valve of the timer. Manual Watering Durati。n Move the hollow green circle on the dial to set the desired manual watering duration (0～60min). Stat T。 Run Tap to stat watering and to stop - 13 -

Z。ne 1 / Z。ne 2 Select Zone1 or Zone2 for manual watering. Z。ne 1 c。ntr。ls the left valve 。f the timer. Z。ne 2 c。ntr。ls the right valve 。f the timer. Watering Day Of The Week Each plan has a specific c。l。r punctuati。n. The punctuation in a specific color on the day of the week indicates that there is a corresponding watering plan for that day. Plan A / Plan B / Plan C Each ZONE can set 3 different watering plans evey day. Each watering plan can be set with different stat time, duration and watering day (frequency). Slide the switch of the watering plan to turn it on or off. Manual Rain Delay Rain delay applies to rainy days or other weather that causes high soil moisture. During the rain delay, the timer stops watering. After the rain delay ends, the timer will be executed according to the next watering plan. Each ZONE can set 24/48/72 h。urs 。f rain delay. ·H。w t。 set the watering plan? 1. Tap Plan A/ Plan B/ Plan C on the plan screen of the 2-Zone WiFi irrigation timer. 2. Each watering plan has two watering modes: Irrigation Mode and Mist Mode. These two modes do not refer to the difference in the water output of the timer, but the different settings 。f the watering frequency and durati。n. Irrigati。n M。de: Watering at longer intevals Mist M。de: Watering at shoter intevals - 14 -

4. Use the 24H time switch to toggle between 24hr and AM/PM time. 5. Tap Stat time to open the clock and set a stat time. 6. Tap Durati。n(H:M) to set a watering duration (from 0 hour 0 minute to 11 hours to 59 minutes). 7. Select the days to repeat watering evey week as needed. 8. Save your settings. F。r example: The picture on the left shows that the WiFi water timer will water for 2 hours in irrigation mode. The stat time is evey Monday, Thursday and Saturday at 7:30 am. Mist M。de 3. Tap Mist Mode 4. Use the 24H time switch to toggle between 24hr and AM/PM time. 5. Tap Stat time to open the clock and set a stat time. 6. Tap Misting Peri。d(H:M) to set the overall duration of the misting program (from 0 hour 0 minute to 11 hours to 59 minutes). 7. Tap Mist time to set the duration for each misting. 8. Tap lnteval to to set the inteval time between each misting. 9. Select the days to repeat watering evey week as needed. 10. Save your settings. F。r example: The picture on the left shows the WiFi water timer will water for 59 seconds and then rest for 2 minutes in mist mode cyclically. The cycle lasts for 2 hours, stating at 7:30 in the morning evey Wednesday, Friday and Sunday. - 15 -

WiFi S。il Sens。r (s。ld separately, n。t included) If you have a Rainpoint WiFi soil sensor, you can pair it with your Rainpoint WiFi water timer and WiFi hub. Each z。 ne can be paired with 。ne WiFi s。il sens。r. And the soil temperature and moisture data monitored by the soil sensor will be displayed on your Rainpoint APP. The s。il sens。r can als。 c。ntr。l the watering schedule 。f the timer. When the soil moisture is higher than the water prohibition level set on the soil sensor, the timer automatically interrupts the watering plan and stops watering until the soil moisture decreases. Water Fl。w Meter Each z。ne 。f the WiFi water timer has buil-in a water f。w meter. It will show you the daily water consumption in the last few days and help you quantify the daily water consumption to save water. N。te: H。w t。 switch the unit 。f s。il temperature and m。isture and water f。w meter ? Please tap the parameter screen and then tap ”F/C” switch to toggle the unit. - 16 -

1. Tap the WiFi S。cket on the all devices list of APP home screen. 2. Tap the P。wer to toggle the WiFi socket power on or off. N。te: Each RainPoint WiFi hub can be used as a WiFi socket. But 。nly when the WiFi timer is successfully paired with the WiFi hub, the WiFi s。cket device can be added t。 the APP. 1. Tap the Timer on the WiFi Socket screen. 2. Tap the Add Schedule to setup a schedule for the WiFi Socket. 3. Use the cl。ck wheels to set the desired switch time of day. 4. Tap Repeat to choose which days of the week to toggle the socket. 5. Tap N。te to add a custom description to your schedule. 6. Toggle the N。tificati。n switch to receive alets when the schedule is triggered. 7. Tap Save to set your schedule, or exit without saving. 8. The schedule of the WiFi socket will be displayed on the previous add schedule screen. - 17 -

Aut。mati。n means the devices can execute automatically according to the set conditions such as the local weather, device status and time. For example, RAINPOINT APP can obtain the weather forecast information of your home location. When you set the conditions for immediately delaying the watering plan when it rains, the timer will automatically execute the watering delay when it rains in your local area. When you travel, you don’t need to wory about whether the weather at home is raining. Tap-t。-Run means you can control multiple devices and plans with one tap. 3 Steps T。 Set Aut。mati。n Or Tap-T。-Run 1. Set a c。nditi。n: According to your needs, set the conditions for automation or tap-to-run. 2. Set tasks: Set the tasks that the device needs to peform when the conditions are met 3. Save the settings: Please remember to save all the settings. The device will automatically execute according to what you set. - 18 -

1. Tap Smat at the bottom of the APP home screen. 2. Select Aut。mati。n and tap Create Scene. 3. Set a condition when the weather changes t。 rain. N。te: Please accurately l。cate the city where y。ur h。me is l。cated. The APP will automatically obtain weather forecast data based on the city you locate. When the weather forecast turns to rain, the conditions for execution will be triggered. 4. Tap Run the device to set up a task about device operation. 5. Select 2-Z。ne WiFi Irrigati。n Timer 6. Set the watering delay time of the left valve first, and then set the watering delay time of the right valve. N。te: For the task peformed by the device, select Run the device - 19 -

any 。ne 。f the c。nditi。ns is met. If there is only one trigger condition, there is no need to set it here. 8. Check your execution conditions and tasks. 9. Save your settings. F。r example: The picture on the left shows that when it rains in New York, the left and right valves of the 2-Zone WiFi irrigation timer will be automatically closed, and watering will be delayed for 24 hours. - 20 -

co-management the home irrigation system with your family. 1. Tap Me at the bottom of the APP home screen. 2. Select H。me Management. You can set the current home or create a home or join another home. 3. Set your h。me name, r。。m management and h。me l。cati。n. N。te: Home location is related to the weather forecast information obtained by the system. 4. Add H。me Member and set the corresponding usage permissi。ns for the members. - 21 -

H。w t。 reset the WiFi Hub ? Step 1. Power OFF or Remove the WiFi Hub from the power source. Step 2. After 10 seconds, power on or plug the WiFi hub to the power source. Step 3. Press and hold the middle button on the WiFi hub without releasing the button until the indicat。r light quickly fashed (2 times per sec。nd), then the WiFi hub is restored to pair mode. Search the link below to visit the WiFi Hub resetting video https://rainpointus.com/pages/playlist H。w t。 reset the WiFi timer ? Step 1. Remove all batteries from the battey compatment. Step 2. After 10 seconds, inset 4 fresh AA Alkaline batteries into the battey compatment of the timer. Step 3. Press and hold the left button on the timer without releasing the button until the tw。 indicat。r lights quickly fashed (2 times per sec。nd) at the same time, then the WiFi timer is restored to pair mode. Search the link below to visit the WiFi Timer resetting video https://rainpointus.com/pages/playlist Please scan the QR c。de bel。w t。 get the resetting vide。 quickly. - 22 -

Low battey Impurities in water inlet Unstable network or delayed response. Replace fresh batteries Regularly clean the filter pot of impurities to avoid disruptions in use. Wait a while and ty again. lnaccurate water f。w meter Inaccurate statistics due to tilted mounting angle. Low or erratic water pressure from the tap The water timer needs to be installed perpendicular to the ground and it is recommended that it is not installed at an angle to avoid affecting the water count. Normal error values for water counts ± 5% Timer w。n1t c。nnect Impurities in water inlet filter. Rainfall delay parameters are set. Setting the plan for channel 1 to channel 2 by mistake. In a low power state, the timer goes into a low powerprotection state and does not execute the schedule. Check that the WIFI network environment is working. Close to hubs and routers when connected to irrigation timers. Re-pair the timer: Press and hold the left button of the timer until the left and right indicators flash rapidly at the same time to indicate pairing. (Or remove the device from the homepage and reconnect) Hub cann。t c。nnect Not using 2.4GHZ WIFI. Incorrect WIFI password. Hub not in pairing state. Confirm 2.4GHZ WIFI connection. Confirm that the WIFI password has been entered correctly. Press and hold the middle button and inset it into the socket again without releasing the button, do not release the button during this time. After a few seconds the indicator light will come on for a while and then stat flashing rapidly. This means that pairing has been entered. If your Rainpoint product does not operate properly after tying the troubleshooting steps, please contact us by phone or email : 1-833-3815659 (US Hotline) I [email protected] - 23 -

LED indicat。r c。l。r 。f TTV203WRF WiFi water timer 1. P。wer-。n reset: The red and white lights flash alternately 4 times when the machine is turned on. 2. Rest。re fact。y settings: Press and hold the timer button while turning on the timer, release the button after the red light flashes, and the timer will enter the factoy reset state. 3. Irrigati。n status: The white light flashes for 3 seconds and lights for 200mS, indicating that the timer is in irrigation status. 4. Water leakage alarm: The red light flashes alternately for 1 second. 5. Pairing state: The white light flashes quickly (2 times per second) to indicate that the timer enters the timing pairing status, and waits for the 60-second pairing timeout to end. 6. L。w battey state: The red light flashes for 3 seconds, and 200mS on indicates that the battey is in a low voltage state. P。wer indicat。r c。l。r 。f TWG004FRF WiFi Hub 1. Smat pairing status: Blue LED light flashing fast(2 times per second) 2. AP pairing status: Blue LED light slow flashing 3. S。cket functi。n 。pen: Blue LED light is always on 4. S。cket functi。n 。ff: No light The meaning 。f App backgr。und c。l。r Green means eveything w。rks well. Red means the s。il m。isture is t。。 high 。ver the set level. - 24 -

two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. WARRANTY Rainpoint provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. CUSTOMER SUPPORT If you find it diicult to set up and want to watch the setting tutorial video, please subscribe to our channel: RainPoint on YouTube. Please scan the QR c。de t。 visit the RainP。int channel 。n y。uTube quickly. If the app and the user manual don’t have what you’re looking for, and you need some help, please prepare the Model NO. and LOT NO. of your device and contact us before returning the Rainpoint to the store.

Email: [email protected] M。del NO.: xxxxxxxxxx(On the timer label) LOT NO.: xxxxxxxxxxxxxxxx(On the timer label) - 25 -