Panasonic EH-NA95 Operating Instructions Manual

Model No. EH-NA95 Manual writing 1733117 Kana Matsusaka

4. Maintenance of the hair dryer 5. Troubleshooting 6. Specifications

To reduce the risk of injury, loss of life, and damage of equipment, always observe the following safety precautions. Explanation of symbols The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes a hazard that could result in minor injury. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.

- Doing so may cause burn, electric shock, or fire due to a short circuit. Never use this hair dryer if the power plug fits loosely in a household outlet. - Doing so may cause burn, electric shock, or fire due to a short circuit. Do not damage or modify, or forcefully bend, pull, or twist the cord. Also, do not place anything heavy on or pinch the cord. -Doing so may cause electric shock or fire due to a short circuit. Do not use with the cord bundled. - Doing so may cause fire or electric shock. Do not leave the area with the main switch turned on. - Doing so may cause fire. Do not connect or disconnect the power plug to a household outlet with a wet hand. - Doing so may cause electric shock or injury. Do not use this hair dryer with a wet hand. - Doing so may cause electric shock or fire due to a short circuit. Do not use in proximity of flammable materials (such as alcohol, benzine, thinner, spray, hair care product, nail polish remover). - Doing so may cause an explosion or fire. Do not store this hair dryer in a bathroom or location with high humidity. Also, do not place in a location where water may spill (such as top of a vanity). - Doing so may cause electric shock or fire. Do not immerse this hair dryer in water. Do not use this hair dryer in the bathroom or location with high humidity. - Doing so may cause electric shock or fire. Do not wrap the cord tightly around the main body when storing. - Doing so may cause the wire in the cord to break with the load, and may cause electric shock or fire due to a short circuit.

air outlet, or nanoe outlet. - Doing so may cause fire, electric shock, or burn. Do not store within the reach of children or infants. Do not let them use it. - Doing so may cause burn, electric shock, or injury. Never modify, disassemble, or repair. - Doing so may cause ignition or injury due to abnormal operation. Contact an authorized service center for repair. Regularly clean the power plug to prevent dust from accumulating. - Failure to do so may cause fire due to insulation failure caused by humidity. Disconnect the power plug and wipe with a dry cloth. Immediately stop using and remove the power plug if there is an abnormality or failure. - Failure to do so may cause fire, electric shock, or injury. •Air is not emitted •Unit stops sporadically •Interior becomes red hot and smoke is emitted - Immediately request inspection or repair at an authorized service center. Disconnect the power plug by holding onto it instead of pulling on the cord. - Failure to do so may cause the wire in the cord to break, and may cause burn, electric shock, or fire due to a short circuit. When you see sparks around the air outlet while using the hot air setting, stop use and remove the lint on the air outlet and air inlet. - Failure to do so may cause burn or fire. Fully insert the power plug. - Failure to do so may cause fire or electric shock.

matched to the rated voltage indicated on the appliance. - Failure to do so may cause fire, electric shock, or burn. Use the household outlet alone: do not use with an extension cord. - Failure to do so may cause fire or electric shock. Always turn OFF the main switch and disconnect the power plug from the household outlet after use. - Failure to do so may cause fire or burn. When you feel pain or abnormality in your skin or body, stop using it immediately. - Failure to do so may cause troubles of skin and body

- Doing so may cause electric shock or ignition. Do not use with the air inlet damaged. - Doing so may cause to get dangled your hair in the air inlet, which could damage the hair. Do not touch the air outlet, set nozzle, quick‑dry nozzle, and diffuser, which will become very hot. - Doing so may cause burn. Do not use on children or infants. - Doing so may cause burn. Do not store the cord in a twisted state. - Doing so may cause the wire in the cord to break with the load, and may cause electric shock or fire due to a short circuit. Only use for drying or styling human hair. (Do not use on pets, or to dry clothing, shoes, etc.) - Failure to do so may cause fire or burn. Please keep a distance of over 3 cm between the air outlet and your hair. - Failure to do so may result in your hair being burned. Please keep your hair at least 10 cm away from the air inlet. - Failure to do so may cause to get dangled your hair in the air inlet, which could damage the hair. Please make sure your fingers do not touch the joint when using or folding or stretching the handle. - Failure to do so may cause injury due to pinching your fingers Please close your eyes when applying wind to your face in skin mode. - Failure to do so may cause trouble of eyes.

① Air outlet ② Platinum minus ion outlet ③ nanoe outlet ④ Mineral minus ion outlet ⑤ Air inlet ⑥ nanoe lamp ⑦ Temperature indicator ⑧ Temperature switching button ⑨ nanoe charge panel ⑩ Handle ⑪ Ring for hanging ⑫ Bushing ⑬ Cord ⑭ Power pulug ⑮ Main switch TURBO : Strong airflow DRY : Slightly strong airflow SET : Gentle airflow

Switch indication or lamp lighting Mode or function explanation “HOT” is selected when turn on the power. Warm air Blow warm air. Warm air Cold air Warm and cold air rhythm Detect ambient temperature and alternately blow hot / cold air at optimal intervals. TURBO or DRY SET Cold air (When TURBO or DRY) Blow cold air. Skin (When SET) Blow weak cold air including 'nanoe' which can handle skin care & mineral platinum. Scalp Blow gently to skin temperature air.

Preparation 1. Wipe the moisture of the hair roughly with a towel 2. Comb the snarls out of hair with a brush. 3. Insert the power plug into a household outlet. Dry hair 1. Select the airflow with the main switch. 2. Apply warm air to the whole hair. 3. Use “Warm and cald air rhythm” mode when the hair is almost dry. 4. Turn the power switch to “OFF”. 5. Pull out the power plug from house outlet. 6. Set the hair with a brush. Care for moisture of the skin 1. Select “SET” with the main switch. 2. Select “COLD” with temperature switching button. 3. Please spout about 20 cm from the air outlet 4. Apply for about 1 minute while swinging the main unit side to side. Gently dry to the skin 1. Select the airflow with the main switch. 2. Select “SCALP” with temperature switching button. 3. Dry the skin with brush the hair upward. 4. Select “HOT” with temperature switching button. 5. Apply warm air to the whole hair.

1. Get wet the hair. 2. Select “SET” with the main switch. 3. Select “HOT” with temperature switching button. 4. Apply warm air to straighten out the hair

Maintaining the hair dryer 1. Soak the cloth in mixed the solid soap water. 2. Wring the cloth. 3. Wipe up the hair dryer with the cloth. Maintaining air inlet Remove any dust using some tissues. Maintaining nanoe outlet 1. Prepare a clean swab. 2. Dampen the point of the swab with tap water. 3. A needle portion is located deep within the nanoe outlet. Using the swab, rub this portion gently about 5 times. Maintaining the air outlet 1. Insert the power plug into a house outlet. 2. Select “SET”, “DRY” or “TURBO” with the main switch. 3. Select “COLD” with temperature switching button. 4. Remove any dust using a swab.

while using in “HOT” mode.  Dust has attached on the air inlet or air outlet.  Hair or something is blocking the air inlet.  Remove attached dust.  Do not block the air inlet. Sparks can be seen within the hair dryer. The hot air is abnormally hot. The power plug is abnormally hot. The connection to the household outlet is loose. Use a household outlet that fits securely. Sparks are generated inside the nanoe outlet. Abnormality caused by a dirty electrode. Maintain the nanoe. The nanoe outlet emits a noise outlet. (crackling noise). 6. Specifications Power source AC100V 50-60Hz Power consumption 1200W (When “TURBO”) Air flow rate 1.3m3/min (When “TURBO”) Warm air temperature 125℃ (When “DRY”) Cord length 1.7m Weight 585g