Regent Lighting Solutions Olympia Pro Installation Instructions

ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN 1 PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION. PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION. Electrical products can cause death, injury, or damage to property. Installation of this product must be carried out by a qualified electrician, in compliance with SANS 10142 or corresponding regulations of the country of installation. On completion of installation, the Certificate of Compliance must be updated. Olympia pro WARNING Electronic Control Device Electronic Control Device WARNING 3 - 13 MAIN REEF SERVICE ROAD, CORNER SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA, JOHANNESBURG. SOUTH AFRICA. TEL : +27 11 474 0171 www.regentlight.co.za REGENT LIGHTING A DIVISION OF WAHL INDUSTRIES. Save These Instructions for Future Reference Save These Instructions for Future Reference ELECTRIC SHOCK HAZARD This equipment is to be serviced by trained personnel only. ELECTRIC SHOCK HAZARD This equipment is to be serviced by trained personnel only. Surface mounted and Suspended option available Olympia pro recessed mounted DO NOT CONNECT THE FITTING LIVE June 2021 2 3 L Bracket Ÿ If the main supply power (live) is on, it will cause damage to the luminaries. Requirements: Ÿ Be sure the electricity to the system you are working on is isolated. 1. Fitting as supplied in Regent Lighting Solutions box. For non user replaceable light source: The light source contained in this luminaire shall only be replacedby the manufacturer or his/her service agent or a similar qualied person 1 DO NOT PLUG (CONNECT) WHEN LIVE AS IT WILL CAUSE DAMAGE TO THE LUMINAIRE. 2. Hole cut out 365 x 365 mm on the ceiling 3. Insert Olympia frame and secure onto soft surface using L brackets onto frame. Regent Lighting reserves the right to change specifications modify designs and discontinue items without incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error therein. TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING WARNING: TO AVOID FIRE, SHOCK OR DEATH ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS 60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY Sensor Version optional 365 365 Ceiling cut out

This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current. The product must be regularly maintained, including the replacement of lamps/LED timeously. This product could be HAZARDOUS if not used correctly, it could cause electric shock, serious bodily harm or death. This product is not a toy, please keep away from children. This product may contain small parts that can be swallowed. Use only the correct light bulbs/LED as stipulated on the carton for the product. Any modifications of this product after supply will result in the guarantee being void. Spare parts may become unavailable over time.Items can vary slightly from the picture on the carton Coastal humidity can affect the longevity of the light fitting over time. Be sure to follow the steps in the order given. Read instructions carefully. Important Safety Instructions Ensure ceiling is in between the bracket and frame 4.Align L bracket with frame and fasten together using screws. Ensure recess frame is secured. 7 . 1 . L o w e r  t t i n g o n t o mounted frame. 4 5 756 L bracket frame 7 Mains to Luminaire Earth Loop Green/Yellow Switch Wire Red Neutral loop Black or Blue (L) Brown (E) Green/Yellow (N) Blue 5.Connect the Switched Live (L), Neutral (N) and Earth (E) cable(s) to the Male Female connectors. NB: Ensure power cable is c o n n e c t e d b e f o r e mounting tting into frame. Test power. 8 7.2. Secure the tting onto the frame using 4 Allen screws. 8. Switch on power supply. 6.Insert olympia pro tting d i a g o n a l l y t h r o u g h mounted frame. NB : Ensure there is no pinch or trapped insulation as tting is placed. DO NOT PLUG (CONNECT) WHEN LIVE AS IT WILL CAUSE DAMAGE TO THE LUMINAIRE. Male/Female Connector L Bracket Botton head screw Frame